Tools for Lathe Machines (Tools for Specific Machines) for sale, page 212

Wadley, Alabama, United States
Jan 30th

TELEDYNE LATHE TOOL HOLDER CRAN-R 164 1 1/4" X 1" SHK 7" OAL

Carson City, Nevada, United States
Jan 30th

I am selling my Monarch 10EE, Tracer Unit. This auction is for the tracer only, not the lathe. Although it has been several years since I used the tracer, last time I did it worked perfectly.

New spindle take-up bearing kit for 9" & 10k south bend lathe

Durham, North Carolina, United States
Jan 30th

New Precision Take-up Bearing for South Bend 9" Model A,B,C and All 10k Lathes From ILION Industrial Services, LLC Please note that these precision ground bearings are all brand new, made in the USA. They are sold as a set of two thrust washers and one bearing as shown above and come with complete instructions for installation on your 9" workshop model A, B, C or the model 10k lathe.

47 and 37 tooth metric change gears for logan 10", 11", and 2900 serie12" lathes

Woodinville, Washington, United States
Jan 30th

These are new gears I manufacture from 1144SP steel. They are functional equivalents to Logan PN's LP-1665 and LP-1666. 7/16" thick, 5/8" bore with a 5/32" keyway.

T-slot dovetail- 2 tool slide-lever actuated lathe crossslide-clean hardinge?

Jackson, Mississippi, United States
Jan 30th

Lever actuated T-Slot Cross Slide - "Rack and Gear" feed Pictures tell the story - lower 48 States buyer pays actual shipping used selling as is

Atlas 6" 4 jaw lathe chuck

Woodinville, Washington, United States
Jan 30th

atlas 6"chuck in good working order

Machinist tool lathe mill gear set up for dunlap craftsman small lathe

Morris Plains, New Jersey, United States
Jan 30th

PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS, Sold as is, no returns. . , .

Follow rest for lathe 7" center height 14" swing

Chino, California, United States
Jan 30th

We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! GF Condition: GREAT!

Pair of 4 step v-pulleys for xl series 10" sheldon lathe with "e" motor drive

Dewey, Arizona, United States
Jan 30th

Pair of 4 Step V-Pulleys #E1025X for XL Series 10" Sheldon Lathe with "E" Type Motor Drive 15/16" Keyed bore, ODs are 6 1/4", 5 3/16", 4 1/2" and 3 1/16", 5/8" top width grooves, minor wear. No international, ask questions before bidding, always happy to combine shipping when possible.

Motor and counter shaft pulley for xl series 10" sheldon lathe with "e" motor dr

Dewey, Arizona, United States
Jan 30th

Motor Drive Pulley #A-1500 and Counter Shaft Pulley #E1514 for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Motor pulley is 3 1/2" OD with 3/4" keyed bore, counter shaft pulley is 9" OD with 15/16" keyed bore, 1/2" top groove width on both, minor wear. No international, ask questions before bidding, always happy to combine shipping when possible.

Head stk & under drive pulleys for xl series 10" sheldon lathe with "e" motor dr

Dewey, Arizona, United States
Jan 30th

Head Stock Pulley #XL-1528-50 with Integral 32T Gear, Under Drive Pulley #A1505 with Drive Belts for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Head stock pulley has 1 13/16" bore, 4 9/16" OD bull gear hub with good plunger holes, under drive is 3 9/16" OD with 7/8" keyed bore, both have 5/8" top width double grooves, minor wear, belts are Gates B-47 hi-power, look matched but cannot identify any match marks, some wear, no cracks or splits.

Belt tension assembly for xl series 10" sheldon lathe with "e" motor drive

Dewey, Arizona, United States
Jan 30th

Belt Tension Assembly for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Includes eccentric lever #E971, eccentric shaft #E982, eccentric #E983 and screw and jam nuts, all excellent. No international, ask questions before bidding, always happy to combine shipping when possible.

Adjusting rod assembly for xl series 10" sheldon lathe with "e" motor drive

Dewey, Arizona, United States
Jan 30th

Motor Drive Belt Tension Adjusting Rod Assembly for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Includes adjusting rod #E980, eccentric #E983 and pin, guide stud #E1029, jam nuts, eccentric pin and key, all excellent. No international, ask questions before bidding, always happy to combine shipping when possible.

Top hanger plate for xl series 10" sheldon lathe with "e" motor drive

Dewey, Arizona, United States
Jan 30th

Top Hanger Plate #E-966-X for XL Series 10" Sheldon Lathe with "E" Type Motor Drive No cracks or repairs. No international, ask questions before bidding, always happy to combine shipping when possible.

Lower cone bracket for xl series 10" sheldon lathe with "e" motor drive

Dewey, Arizona, United States
Jan 30th

The Lower Cone Bracket #E-968-X is a perfect fit for XL Series 10" Sheldon Lathe with "E" Type Motor Drive. If you have any questions about this product, feel free to ask before placing your bid. You can rest assured that this bracket is free from any cracks or repairs.

Motor base for xl series 10" sheldon lathe with "e" motor drive

Dewey, Arizona, United States
Jan 30th

Motor Base #XE-969 for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Includes support screw assembly and swivel base shaft with spacers, no cracks or repairs. No international, ask questions before bidding, always happy to combine shipping when possible.

Main bracket for xl series 10" sheldon lathe with "e" motor drive

Dewey, Arizona, United States
Jan 30th

Main Bracket #E967 for XL Series 10" Sheldon Lathe with "E" Type Motor Drive Includes upper shaft #E974 and needle bearings #A1100, keys, fiber washer and lock collar, shaft and bearings are excellent, no cracks or repairs. No international, ask questions before bidding, always happy to combine shipping when possible.

South bend lathe instructions sheet 1928-9 inch junior new model

Delhi, New York, United States
Jan 30th

Rare South Bend Lathe item. Catalog Supplement No.23-S, titled "Application of the 9-inch Junior New Model South Bend Lathe in the Electrical Shop, Service Station and Auto Repair Shop", dated December 6, 1928 Four pages detailing methods of using this tool in those facilities, such as Making Bushings, Truing Commuters, and a dozen other uses are shown. Also a page of "Equipment for Servicing Armatures, Valve Bushings and Pistons" shown & described.

56" bed for xl series 10" sheldon lathe

Dewey, Arizona, United States
Jan 30th

56" Bed #L145 with Rack #K1115 for XL Series 10" Sheldon Lathe Under Drive Machines .008" Sag wear, 5 1/16" center to center on V-ways, 5 3/16" center to center on flat ways, 7" wide, normal nicks and dings. Local pickup only. Too heavy to ship UPS.

Original pedestal levin hd precision instrument lathe watchmakers jewelers tool

Van Nuys, California, United States
Jan 30th

SELLS For $24700.00 !!!! FULLY OPERATIONAL!!! Double Swivel Slide Lathe Compund Slide X Y 3-1/2" x 5" Lever Operated Tailstock Lever Collet Closer for Headstock Several 10+) D Style Collets, Dead Center, Live Center Machine Specifications: Swing Over Bed 4" Capacity Through Collet, Max 5/16" Collet Taper on Headstock D Motor 1/4HP 110V 1Ph with Variable Speed Control A101FB , S/N 16069 Foot Pedal Control