+ Post new Ad

Tools for Lathe Machines

The average price for current category was $1,015.08 last month.

There are 5408 ads in this category.

Miscellaneous Group -over 8 pounds of assorted Cutting tools from Metal Lathe

Miscellaneous group -over 8 pounds of assorted cutting tools from metal lathe

  • Troy, Michigan, United States
  • Jan 30th
This is a group of metal lathe cutting tools more than 8 pounds as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. I don't know what all this is I'm a wood not metal worker --- it is priced to sell and is sold AS PICTURED. Have wear and tear dust and dirt and rust and pitting but in good working condition.
Miscellaneous Group over 8 pounds of assorted Cutting tools from Metal Lathe

Miscellaneous group over 8 pounds of assorted cutting tools from metal lathe

  • Troy, Michigan, United States
  • Jan 30th
This is a group of metal lathe cutting tools more than 8 pounds as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. I don't know what all this is I'm a wood not metal worker --- it is priced to sell and is sold AS PICTURED. Have wear and tear dust and dirt and rust and pitting but in good working condition.
Miscellaneous Group More than 8 pounds assorted Cutting tools from Metal Lathe

Miscellaneous group more than 8 pounds assorted cutting tools from metal lathe

  • Troy, Michigan, United States
  • Jan 30th
This is a group of metal lathe cutting tools more than 8 pounds as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. I don't know what all this is I'm a wood not metal worker --- it is priced to sell and is sold AS PICTURED. Have wear and tear dust and dirt and rust and pitting but in good working condition.
Taper Attachment Assembly for 10" Sheldon Lathe

Taper attachment assembly for 10" sheldon lathe

  • Dewey, Arizona, United States
  • Jan 30th
Taper Attachment Assembly #LTT-210-A for 10" Sheldon Lathes Telescopic style with telescoping cross feed screw, eliminates the need to disengage the cross feed nut for tapering, has gibs for adjusting slides, swivel bar is graduated, in inches per foot on one end (up to 3 1/2" per foot) and degrees on the other end (up to 10 1/2 degrees). Will turn or bore up to 9 1/2" in length per setting.
Miscellaneous Group More than 9 pounds assorted Cutting tools from Metal Lathe

Miscellaneous group more than 9 pounds assorted cutting tools from metal lathe

  • Troy, Michigan, United States
  • Jan 30th
This is a group of metal lathe cutting tools more than 9 pounds as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. I don't know what all this is I'm a wood not metal worker --- it is priced to sell and is sold AS PICTURED. Have wear and tear dust and dirt and rust and pitting but in good working condition.
HOW TO RUN A LATHE 129 page Book South Bend Lathe Works Vol. 1 Edition 51 --1952

How to run a lathe 129 page book south bend lathe works vol. 1 edition 51 --1952

  • Troy, Michigan, United States
  • Jan 30th
This is a very informational book for the Care and Operation of a Screw Cutting Lathe. as pictured from a Vintage 12" Sears Craftsman Metal Lathe #101.07403 with a 2 3/4" gap between bed rails. Has wear and tear dust and dirt but in good working condition.
Tail Stock Assembly for XL Series 10" Sheldon Lathe

Tail stock assembly for xl series 10" sheldon lathe

  • Dewey, Arizona, United States
  • Jan 30th
Tail Stock Assembly for XL Series 10" Sheldon Lathes Minor thread wear and backlash, spindle has clean, clear scale and very good taper bore, original clamp, 5" center height, very smooth running, includes dead center. No international, ask questions before bidding, always happy to combine shipping when possible.
Atlas 12" Lathe Follower Rest, Part Number L4-396

Atlas 12" lathe follower rest, part number l4-396

  • Aptos, California, United States
  • Jan 30th
Atlas follower Rest in good condition. L4-396 on casting which I believe is for 12"
16" 4-JAW LATHE CHUCK D1-8 MOUNT

16" 4-jaw lathe chuck d1-8 mount

  • Wadley, Alabama, United States
  • Jan 30th
16" 4-JAW LATHE CHUCK D1-8 MOUNT - 4-3/4" CENTER HOLE
Thread Dial Assembly for XL Series 10" Sheldon Lathe

Thread dial assembly for xl series 10" sheldon lathe

  • Dewey, Arizona, United States
  • Jan 30th
Thread Dial Assembly #K890 for XL Series 10" Sheldon Lathes 1 1/8" Dial face, very good 32T gear, 3 1/8" from center of gear to center of mounting hole, includes mounting bolt. No international, ask questions before bidding, always happy to combine shipping when possible.
ATLAS CRAFTSMAN SOUTH BEND LOGAN LATHE NEW 5/16 SQUARE END CHUCK KEY WRENCH NEW

Atlas craftsman south bend logan lathe new 5/16 square end chuck key wrench new

  • Niles, Michigan, United States
  • Jan 30th
LATHE FACE PLATE 17" DIAMETER D1-6 MOUNT STK 763

Lathe face plate 17" diameter d1-6 mount stk 763

  • Wadley, Alabama, United States
  • Jan 30th
LATHE FACE PLATE 17" DIAMETER D1-6 MOUNT STK 763
Atlas Armature Mica Undercutter Stand for 10" or 12" Atlas Lathes

Atlas armature mica undercutter stand for 10" or 12" atlas lathes

  • Dewey, Arizona, United States
  • Jan 30th
Atlas Armature Mica Undercutter Stand for 10" or 12" Atlas Lathes Will work with other lathes that have similar dovetails, no need to remove compound while using, 8 1/4" tall from bottom of base to top of hand wheel (excluding handle), dovetail slot is 2" wide at top and 1 3/4" wide at bottom, clamp wedge is shop built. I am not sure of Atlas' assembly number, casting number on base is 9-511, everything in very good condition with no cracks or repairs.
Taig 4500 Micro Lathe; used as-is works great

Taig 4500 micro lathe; used as-is works great

  • Abingdon, Virginia, United States
  • Jan 30th
A well used Taig 4500 Micro Lathe that works well. Not the original motor as far as I can tell. Looks to be a 1/5 hp Dayton.
Sheldon 48" Metal Lathe Model TU 1236B

Sheldon 48" metal lathe model tu 1236b

  • Bridgewater, New Jersey, United States
  • Jan 30th
Sheldon Metal cutting lathe in working condition with tail stock and 3 drawer base. Model TU-1236-B automatic cross feeds,
DTM H75-10A Quick Change Lathe Knurling Tool Holder Compatible with Aloris BX

Dtm h75-10a quick change lathe knurling tool holder compatible with aloris bx

  • Millstone Township, New Jersey, United States
  • Jan 30th
var itemNumber = window.ebayItemID ?
UNIMAT DB200 LATHE MILL Conbination metalworking watchmakers STARRETT INDICATORS

Unimat db200 lathe mill conbination metalworking watchmakers starrett indicators

  • Salem, Virginia, United States
  • Jan 30th
Working UNIMAT DB200 lathe with mill attachment, vise, drill chuck, face plate, lathe tool holder, o-rings and two Starrett indicators. The indicators are used for precision stops. What you see is all that is there.
G. Boley "E" Watchmakers Lathe

G. boley "e" watchmakers lathe

  • Millstone Township, New Jersey, United States
  • Jan 30th
G. Boley "E" Watchmakers Lathe
Milling attachment Atlas Craftsman Lathe M6-501

Milling attachment atlas craftsman lathe m6-501

  • Maple Shade, New Jersey, United States
  • Jan 30th
This is a Atlas/Craftsman M6-501 milling attachment that is in very good shape. It equips the lathe for face milling, cutting keyways and slots, milling dovetails, squaring shafts. Easily installed.
Haas CNC 5001 Rotary Tailstock

Haas cnc 5001 rotary tailstock

  • Millstone Township, New Jersey, United States
  • Jan 30th
Haas CNC 5001 Rotary Tailstock

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies