Tools for Saws & Cutting Machines (Tools for Specific Machines) for sale, page 65

Saw, 2 metal saw,doall ver. table saw (26.2 hours) & kalamazoo horizontal saw

Martinsville, Virginia, United States
Jan 30th

For Sale 2 saws one Horizontal & one Vertical, See 2 videos of these saws in action. (1) Do All Vertical Bandsaw 12"x36" with large air tilit table Model 3613-1 Serial Number 440-00847 like new (26.2 hours of use)& (1) Kalamazoo Horizontal Saw Model U1816 Serial Number 175 These two saws are for sale to the highest bidder and we will need t

Hand held screw and eye hook screw ,cork screw type

Pico Rivera, California, United States
Jan 30th

Unknown Corkscrew Type Tools ,One Is Clearly Marked "Rhopac" . Wear and Usage ,Dings .please see photos thanks

Bandit cnc control

San Carlos, California, United States
Jan 30th

Bandit CNC Control for Electronic Boards, and 3 DC Drives. Currently not in operation, but can be made to run after adjustments, and some tech time adjustments.

Set of 3 * wellsaw model 1270 (2) + v12 (1) automatic * band saws * good cond'n

Comber, Ontario, Canada
Jan 30th

Set of 3 * Wellsaw Model 1270 (2) + V12 (1) Automatic * Horizontal Band Saws * Good Condition Removed in working condition from factory that closed Lots of spare parts included along with new blades Will sell separately if interested send message or contact below WILL WORK WITH BUYER TO ARR

John deere 670 mid pto kit am107213 compact utility tractor m95889

Millstadt, Illinois, United States
Jan 30th

New old stock John Deere 670 mid pto kit part number am107213 or M95889 . Installation instructions say it is for the tractor made in Europe. Consult JD parts to make sure it will work on your model.

Starrett 1-1/8 hole saw 29mm vh0118 edp55087 bearcat

Hinsdale, Illinois, United States
Jan 30th

Auction is for one 1 1/8 hole saw Starrett VHO118 29mm EDP55087

Doall band saw wheel c80 horizontal bandsaw machine shop tool new list $800

Akron, Ohio, United States
Jan 30th

DoAll Band Saw Wheel C80 Horizontal Bandsaw Machine Shop Tool New List $800

Dennison 6-ton multipress c-frame type hydraulic press - used - am10791

Cleveland, Ohio, United States
Jan 30th

(1) 6 TON DENISON MULTIPRESS C-Frame Type Hydraulic Press – used – AM10791

Roll-in industrial vertical metal cutting band saw

Fort Lauderdale, Florida, United States
Jan 30th

Roll-In Band saw USED in great condition. valued at $3500 in its current state What You See in the pictures is the actual item for sale. SOLD AS IS!!

Air driven cut off saw

Knoxville, Tennessee, United States
Jan 30th

Air driven cut saw. Works great.

Doall - vintage band saw, parts lot, ml - 16 - vertical saw.

Vienna, Virginia, United States
Jan 30th

ATTENTION: THE UPPER WHEEL SPINDLE SHAFT.. IS NO LONGER AVAILABLE..before bidding please call for current parts in lot. yes,.

Hem saw h160 xlm bandsaw

Jackson, Alabama, United States
Jan 30th

HEM Saw H160XLM bandsaw cap. 36"x24" saw to big for my use comes with 9 power roller bed tables motor missing on one saw can be seen under power also has 12X12 beam back stops

Kasto cold cut saw

Export, Pennsylvania, United States
Jan 30th

We have a Kasto model V315U saw for sale that hasn't been used very much. We purchased this saw in 1998 for a specific job we were making at the time out of extruded material. About 8 years ago that same job started coming in in the form of a casting and since then we have only used the a handful of times to cut some tubing.

Doall vertical band saw guide support block.

Overland Park, Kansas, United States
Jan 30th

CONDITION; USED. DoALL VERTICAL BANDSAW, BLADE GUIDE SUPPORT BLOCK. I BELIEVE IT IS A UPPER BLOCK, THIS BLOCK HOLDS THE .500" WIDE, HARDENED BLADE GUIDES WITH 1/4" SCREWS.

Bandsaw blade guides for 1/4" blades,new, doall & other

Kansas City, Missouri, United States
Jan 30th

NEW, MADE IN USA. ONE PAIR; (2 PIECES) THIS SIZE IS FOR USE WITH 1/4" WIDE BANDSAW BLADES. THE GUIDE'S SIZE IS; .160"THICK x .500" WIDE x 2-7/16" LONG.

Bandsaw blade guides, for 5/8" or 3/4" blades,doall&others, new

Kansas City, Missouri, United States
Jan 30th

NEW, MADE IN USA. ONE PAIR; RIGHT AND LEFT HAND, MAY BE USED ON THE UPPER OR LOWER DoALL GUIDE SUPPORT BLOCKS. THIS COMBINATION SIZE IS FOR USE WITH 5/8" or 3/4" WIDE SAW BLADES.

Bandsaw blade guides, for 3/8" blades,doall/others, new

Kansas City, Missouri, United States
Jan 30th

NEW, MADE IN USA. ONE PAIR; ( 2 PIECES ) FOR USE ON THE UPPER OR LOWER GUIDE SUPPORT BLOCKS THIS SIZE IS FOR USE WITH 3/8" WIDE SAW BLADES. THE GUIDE SIZE IS; .270" THICK x .500" WIDE x 2-7/16" LONG.

Dayton horz band saw

Upland, California, United States
Jan 30th

Dayton horz band saw

Newport hydraulic id/od grinder 10"x 25.5" cylindrical grinder ( parting out )

Troy, New York, United States
Jan 30th

This unit came from a community college in Upstate NY. I t was sitting for a long time in their machine shop. All parts move free and appears to be in usable condition.

Doall contour saw #16-s-f-p

Tulsa, Oklahoma, United States
Jan 30th

Contact Dave at 918-640-9044 or dave@okgage.com Contact Seller for Wire Transfer Information Buyer responsible for all freight charges. All items are sold as is, where is with no warranties either expressed or implied as per Oklahoma Gage & Supply, "Terms & Conditions" statement as posted on website at www.okgage.com. TERMS AND CONDITIONS OF SALE These Terms & Conditions apply to All Equipment owned by Oklahoma Gage & Supply and featured on this website.