torque ring for sale, brand-new and used.

E-generator LED Dental High Speed Handpiece Push Button Turbine 4 Hole SANDENT M

Item Condition We are an authorized Wera Tools distributor. This item was purchased directly from Wera. It's BRAND NEW in the original packaging where packaging is included.

Used but in nice shape and well maintained 7.5 ton swivel lifting ring as pictured. 15,000 rated pounds with an 1-1/4" Unbrako brand Allen head bolt and it weighs 14 pounds. No brand or makers mark on it except the Unbrako name stamped in the bolt head the following in the flat washer below the bolt head: Rated load capacity 15,000 LBS.

?????

Sale Dental Ultrasonic Perio scaler fit EMS/WOODPECKER Handpiece+5 Tips The ultrasonic scaler is one kind of high efficiency scaler. It’s controlled by the microcomputer, has supersonic energy transduce by

USED IN VALVE TESTING WHEN ACTUATED USED ITI MOVATS / CRANE NUCLEAR 3" torque thrust cell MODEL RC 40,000 LBS. 1,170 FT/LBS WITH HARD CASE 18 X 15 X 6 The ITI MOVATS torque thrust cell is a radial web calibrated load cell. The inner ring of the cell is bolted to the top of the valve yoke and the outer ring to the bottom of the actuator.

USED ITI MOVATS torque thrust cell MODEL RA 13,360LBS 200 FT/LBS WITH HARD CASE 18 X 15 X 6 The ITI MOVATS torque thrust cell is a radial web calibrated load cell. The inner ring of the cell is bolted to the top of the valve yoke and the outer ring to the bottom of the actuator. The rings are connected by eight webs that have strain gages to measure actuator torque and thrust simultaneously.

Lyndex line of high-quality CAT TG Collet Chuck offers have ground surface for perpendicular contact between retention knob and holder. AT3 or better taper. Equipped with a left-hand-threaded stop screw and chuck nut.

Stanley-Proto Stanley Proto J1180MA 7 Piece Offset Ratcheting Box Wrench Set

These were purchased as samples for a project that did not take off, and they have been sitting in our parts room. They are in good, like new, condition. Here is specs on them: Disp.ment = 3.5 Max Pressure= P1 250, P2 270, P3 290 Max Speed = 5000 Min.

Ross / TRW Hydraulic Roller Vane Torque Motor MAB 32 Manufacturer: Ross / TRW Part Number MAB - 32 - 2065 - A1 The MAB Series torqmotor is simple and reliable. The design requires fewer parts and has only five seals, compared to as many as fourteen in other motors. The MAB maintains speed under any pressure within its design limit.

Sweepster P/N 03-4425 Series - HB - White Motor Displacement - 24.9 cu in Mounting - 2-Bolt, SAE A Shaft - 1 1/4" Tapered Rotation - CCW - w/ Check Valve Ports - 7/8"-14 SAE O-Ring Max Speed - 180 rpm (cont) / 230 rpm (interm) Max Flow - 20 gpm (cont) / 25 gpm (interm) Max Torque - 8400 lb-in (cont) / 9050 lb-in (interm) Max Differential Pressure - 2500 psi (cont) / 2750 psi (interm) / 3000 psi (peak) Fits - QC Series, RLH Series Sweepers Made in USA!!!!

New Dwyer RMC-108-SSV Flow Meter, 10" Scale 20-200 SCFH Air, SS Valve. It comes with a 30 day money back guarantee. This is some information that I found online - Dwyer RM Series Offers

A2Z TradingBest Items For All Your Need

3-n-1 Bullet Piercing Valve part number BPV31. Lot of (2) New & Unused. This bullet piercing valve fits 1/4", 5/16" and 3/8" Tubing.

DUNCAN VARIABLE RESISTOR PART # 1511-1042 NATIONAL STOCK # 5905-01-019-1203 PART # RR1300B2B7U202 DUAL MARKED CONDITION IS NEW SURPLUS 1986 DATE CODES ( 8633 )

**INDUSTRIAL SUPER HEAVY DUTY SWIVEL HOIST RIGGING EYE!! YOU ARE VIEWING A SUPER NICE,SUPER STRONG SWIVEL HOISTING EYE FOR INDUSTRIAL PURPOSES,THIS GREAT TOOL WEIGHS 6lbs 15oz,Torque 230 FT. LBS.

"Jergens" INDUSTRIAL SUPER HEAVY SWIVEL HOIST RIGGING EYE!!YOU ARE VIEWING A SUPER NICE,SUPER STRONG SWIVEL HOISTING EYE FOR INDUSTRIAL PURPOSES,THIS GREAT TOOL WEIGHS 6lbs 13oz,Torque 100 FT. LBS. with Rated Load 7000 LBS.PLEASE TAKE A GOOD AT THE PICTURES & SEE THE CLEAN,WELL KEPT CONDITION!!NOW,LOOK,BID,BUY,& PUT TO WORK!!**NOTE YOU ARE BIDDING ON THIS ONE RATED 7000 LBS.