Tpi 610 Single Input Manometer Single Input Manometer With ± 80 Inh2o Range

US $134.96

  • Boca Raton, Florida, United States
  • Mar 12th
AUTHORIZED DISTRIBUTOR TPI 610 Single Input Manometer Single Input Manometer with ± 80 inH2O range and 0.01 in H2O resolution Temperature compensated to ensure repeatable measurements. Over-pressure protected to 200 inH2O. +/-80 in H2O range, 0.01 in H2O resolution Autoranging provides high resolution & accuracy at low pressure where it is needed Auto power off Record/Min/Max Backlight display Zero function Trim mode to stabilize readings Applications: Adjust appliance regulators Setting delivery pressures Leakage “shut-in” tests Replace messy U-tube manometers Test low pressure gas systems for leaks Regulator adjustments for pressure and lock-up tests Specifications: inH20 ±80.29 Resolution (max) 0.01 inH2O Accuracy +/-(0.5% of reading + 5 digits) Over Pressure 200 inH2O Power Supply 9V battery Operating Temp. 32°F to 104°F (0°C to 40°C) Operating Hum. 0% to 80% Storage Temp. 14° F to 122° F (-10°C to 50°C) Auto Off 20 minutes Input Type Single Trim Mode Yes Auto Zero Button Yes Min/Max Record No Units of Measure 1 (See range above) Data Hold No Backlight Display Yes Auto Range -15 to +48 inches of water Accuracy ±0.5% of Reading + 5 digits Over Pressure 500 mbar Power Supply 9 Volt Relative Humidity 0% to 80% (0° to + 40°) Operating Temp 0°C to +40°C Storage Temp -10°C to +50°C Auto Power Off After 40 Minutes HVAC Equipment and Instruments/Manometer Template Type (Manometer) Digital Max Pressure 1.734 psi (48.00 IN of H2O) Type of Input Single Engineering Units (HVAC) inch H2O Measurement Absolute, Vaccum Test Equipment General Attributes Unique Features smoothing function to stabilize rapidly changing pressure readings Single Input -15 to +48 inches of water, autoranging 500 mBar overpressure Displays inH20 only Warranty 3 YEARS Power Supply Voltage Battery Powered Safety Approval CE, UL Battery Type 9v Country of Origin Korea
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand TEST PRODUCTS INTERNATIONAL
MPN 610
Model TPI 610
Country/Region of Manufacture Korea, Republic of

Directions

Similar products from Pressure Gauge

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies