Transporters & Carriers

The average price for current category was $3,995.44 last month.

There are 3915 ads in this category.

PAI 4500 High Speed Case Tray Palletizer

Pai 4500 high speed case tray palletizer

  • Caddo Mills, Texas, United States
  • Jan 30th
42” W x 10' Long SS Conveyor with SS Wire Mesh Food Grade Belt

42” w x 10' long ss conveyor with ss wire mesh food grade belt

  • Caddo Mills, Texas, United States
  • Jan 30th
The construction of the frame is also made of high-quality stainless steel. This conveyor was recently removed from a major food plant and is in very good condition. This 42-inch wide and 10-foot long stainless steel conveyor is equipped with a food-grade belt made of stainless steel wire mesh.
GRAVITY FEED METAL SKATE ROLLER WHEEL CONVEYOR ~ 5-1/2' x 18" ~ 10 Sections

Gravity feed metal skate roller wheel conveyor ~ 5-1/2' x 18" ~ 10 sections

  • Havana, Florida, United States
  • Jan 30th
What we have are ten 5.5' x 18" skate roller conveyor sections. Wheels measure 2". One wheel is banged up and will need to be replaced.
15" x 15' Long SS Conveyor with Stainless Pack Off Table

15" x 15' long ss conveyor with stainless pack off table

  • Caddo Mills, Texas, United States
  • Jan 30th
15" x 15' Long SS Conveyor with Stainless Pack Off Table Mfg by Alliance Stainless construction 15" Plastic Mattop Belt 15' Long 15" x 60" L SS Pack Off Table Side rails included but removed for shipping SS Legs 48" elevation Electrical Disconnect 1/2 HP / 1700 RPM SEW drive Electrical 230/460 Volt / 60 HZ / 3 phase
LW1873TK3 1/4  10' Morse Tabletop Chain Conveyor Belt

Lw1873tk3 1/4 10' morse tabletop chain conveyor belt

  • Omaha, Nebraska, United States
  • Jan 30th
Plastic conveyer chain
12" x 60" Long SS Conveyor with 1 hp Drive

12" x 60" long ss conveyor with 1 hp drive

  • Caddo Mills, Texas, United States
  • Jan 30th
12" x 60" Long SS Conveyor SS frame construction12" White food belt60" Overall lengthAdjustable SS Legs28" Elevation - adjustableBaldor 1 hp motorElectrical 208/230/460 Volt / 60 Hz / 3 PhaseRecently removed from a food plantVery Nice Condition !!
Hytrol 24” wide x 60” Long Powered Conveyor with Speed Controller, 115 Volt

Hytrol 24” wide x 60” long powered conveyor with speed controller, 115 volt

  • Caddo Mills, Texas, United States
  • Jan 30th
Hytrol 24” wide x 60” Long Powered Conveyor with Speed Controller Serial # 520104 Variable Speed Controller 24” Black belt 28” wide frame (slider bed type) Belt tensioners28” elevationAdjustable legs1 Hp drive / 1725 rpmElectrical 115 Volt / 60 Hz / 1 Phase Just removed from production
Palace Cap Bottle Elevator Feeder with SS Hopper, 8" Cleated Incline Conveyor

Palace cap bottle elevator feeder with ss hopper, 8" cleated incline conveyor

  • Caddo Mills, Texas, United States
  • Jan 30th
The Palace Cap Bottle Elevator Feeder comes with an SS Hopper and an 8" Cleated Incline Conveyor. Despite its previous use, this Palace Cap Bottle Elevator Feeder remains in excellent condition. For more information, please reach out to tesales@used--equipment.com or contact Kevin at (903) 355-1409.
Plastic Converyor Belting

Plastic converyor belting

  • Bottineau, North Dakota, United States
  • Jan 30th
Plastic Conveyor Belting; 10' long and 15" wide; 16 lbs. unpackaged. Thank you for looking.
42" Width, 25' long Stainless Steel Wire Conveyor Belting, roll #4

42" width, 25' long stainless steel wire conveyor belting, roll #4

  • Bottineau, North Dakota, United States
  • Jan 30th
Auctioning here is 25 feet of 42" width stainless steel conveyor belting; will be listing 3 more rolls at this length and width; I do not end auctions early without notice in the item; this is one of those cases where it could happen because two, three or four rolls might have more value to you if you need extra length and someone might not be a buyer for one roll.
12” W x 16’ Long SS Incline Conveyor with White Food Grade Belting

12” w x 16’ long ss incline conveyor with white food grade belting

  • Caddo Mills, Texas, United States
  • Jan 30th
12” W x 16’ Long SS Incline Conveyor with White Food Grade Belting SS FrameSS Legs - Discharge legs removed for shipping purposes, but included 12" White Rubber Food Grade Belt 30" infeed elevation 52" discharge elevation - can be modified 2 Hp / 1750 RPM Baldor driveElectrical 208/230/460 Volt / 60 Hz / 3 Phase Removed from a Major Food PlantExcellent Condition !!
REXNORD MAT TOP CHAIN HP5705-4.5 # 81416722 10 FEET

Rexnord mat top chain hp5705-4.5 # 81416722 10 feet

  • Omaha, Nebraska, United States
  • Jan 30th
1416722 - 5705 Molded-to-Width (MTW) MatTop® Chain HP5705 4.5 INCH WIDE MOLDED-TO-WIDTH MATTOP CHAIN WITH POLYESTER PINS MOLDED IN BROWN HIGH PERFORMANCE MATERIAL Overview Molded-To-Width (MTW) MatTop® Chains offer flatness, strength, and flush edges to provide long wearlife, product stability and smooth side transfers. Chains molded in our patented High Performance (HP™, WHP) material can reduce wear up to 40% over plain acetal and permit greater operating speeds.
24" Wide x 28' Long SS Incline Conveyor with Food Grade Belt and Speed Control

24" wide x 28' long ss incline conveyor with food grade belt and speed control

  • Caddo Mills, Texas, United States
  • Jan 30th
24" Wide x 28' Long SS Incline Conveyor with Food Grade Belt and Speed Control includes Allen Bradley 160 VFAC Speed Controller in panel SS frame construction 24” White Food Grade Rubber Style Belting SS Sides (hinged to open up) 32" Infeed elevation 84" Discharge elevation SS chute on discharge end SS legs - adjustable height Casters for easy mobility 1.5 HP / 1735 rpm drive Electrical 208/230/460 Volt / 60 Hz / 3 PhaseRemoved from a Major Food Plant Excellent Condition !!
Vibra Screw 6" Volumetric SS Screw Feeder, Metering Screw Conveyor, Conveying

Vibra screw 6" volumetric ss screw feeder, metering screw conveyor, conveying

  • Caddo Mills, Texas, United States
  • Jan 30th
Vibra Screw 6" Volumetric SS Screw Feeder, Metering Screw Conveyor HD Metering Screw Feeder Conveyor with WASH DOWN Motor Size 6 Serial #98-1226 Rated up to 600 CU. FT. HR / 24,000 LBS / HR 6” diameter x 54” Long SS Screw Conveyor SS Contact parts 7” SS discharge port SS Feeder Hopper – 18” Long x 12” Wide x 14” Deep 12” SS Infeed WASH DOWN Motor - 1 Hp / 1725 rpm with Boston Gear reducer Base with
Mojonnier Carbo Cooler, Model 2060, Carbonator, Beverage Bottling Line

Mojonnier carbo cooler, model 2060, carbonator, beverage bottling line

  • Greenville, Texas, United States
  • Jan 30th
Mojonnier Carbo Cooler, Model 2060, Carbonator, Beverage Bottling Line Model #2060 Serial #3934 Rated 1200 to 1500 GPH Accumulator Taylor chart recorder / controller Tri Clover SS Centrifugal pump SS Valving, piping and interconnecting items Site glass Painted base SS Cabinetry Operator interface controls Electrical Controls Crown 28 Valve Bottling Line available Just removed from production Very Nice Condition !!

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies