US $4,800.00
“Very good condition. Tight.” |
Country/Region of Manufacture | Japan |
MPN | Does Not Apply |
Operation | CNC |
Directions
Similar products from Rotating Tables
X and Y Sliding Rotary Table 8" Diameter
4 Jaws Self Centering Chuck 65 mm Back Plate And T nuts M 14 X 1 Actools
Gorton Staiham 10" rotary table Super SMOOTH! 135
Rotary Table Horizontal Vertical 4" + 65mm Self Centering Chuck High Quality
Haas DRAWBAR parts lot,used,untested,AS-IS
2021 NIKKEN CNC-601B with NIKKEN TAT-320 Tail Support & KOMA TL-310 Tailstock
3"(80 mm)Tilting Rotary Table + 50mm Chuck Centering Self with Back Plate+Tnut
4"100mm Tilting Rotary Table 3slot +65mm 2.5" Independent Chuck+Back Plate+Tnut
4"100mm Tilting Rotary Table 4slot +65mm Chuck Self with Back Plate+Tnut Milling
Rotary Table 4" Inch/100 mm Horizontal - Vertical Engineering Tool
Vintage Universal Dividing Tailstock Milling machinist old tool parts 118B
New Nikken CNC601B Rotary Table - 600mm table; matching TAT-501 tail support
Precision Dividing Head With 5" 3-jaw Chuck & Tailstock For CNC Milling
3" 75mm Rotary Table Horizontal Vertical Plus 65mm 3 jaw self centering chuck
3" inch 75mm Tilting Rotary Table with 70mm 4 Jaws Independent Chuck Back Plate
80 mm Rotary Table Backplate For 50 Or 65 mm Self Centering Mini Lathe Chuck
2020 HAAS TR210 5-Axis Trunnion Table
2019 HAAS TR-310 5-Axis Trunnion Table
Microvider Precision 3.5" Tilting Rotary Table, Integrated D-Type Collet Taper
Leg Vice 4 Inch to 5 Inch cast iron
People who viewed this item also vieved
Set (2) Machinist Step Blocks, (7) Different Steps, Matched, Set Up Block, Nice
HUGE Lot of (11) Machinist Blocks, Parallel s, Gage Tool s, Block, Parallel, 17#
Starrett 129 Steel Bench Block, Smooth Finish, 3" Diameter, 1-1/2" High.
SUNDSTRAND PRECISION TOOL HOLDER 78-9071
Sorby Deluxe Revolving Centre System - Hollow 2MT
Precision Heavy Duty Live Center #4 Morse Taper
OKUMA LB15 CNC LATHE OKUMA PARTS BOOK
CNC LATHE TOOL HOLDER BLOCKS OKUMA,HAAS
DE-STA-CO 480-FB Clamp, NPM 54805, New In Bag
DE-STA-CO 895-251-SE-AA-49-R1000-C100K Pneumatic Clamp, W / Arm, No Sensor, Used
DE-STA-CO A895B-13R-72-R1000-C100K Pneumatic Clamp, With Arm, No Sensor, Used
NICE! LYNDEX NIKKEN CAT 40 SHANK SK10 COLLET CHUCK W/ 3-1/4" PROJECTION - SV
NICE! LYNDEX NIKKEN CAT 40 SHANK SK10 COLLET CHUCK W/ 4-1/2" PROJECTION - SV
#10, M4.5 & M5 Tap Size ER25 Rigid Tap Collet Sowa #337-897
1" Inside Diameter 5C Precision Round Collet Hardened & Ground Sowa #325-387
Deckel type collets 40 taper buttress thread
V Block Rotary Grinding/Milling Fixture-REDUCED!
Slotted Angle Plate with Webbed Sides
100 - Clecos (#10) Brass 3/16 Cleco Fasteners with 0 to 1/4" grip
100 - Clecos (#10) Brass 3/16 Cleco Fasteners with 0 to 1/4" grip with Pliers
JACOBS No. 34 Drill Chuck 0" - 1/2" Cap with Key # 2 MT Morse Taper Shank Lathe
WILTON TILTING CAST IRON BENCH VISE ANVIL 180 TILT 121118 RED 4" STEEL JAWS USA
HARBOR FREIGHT TOOLS coupon ...... 4" Vise / Anvil......... Coupon Only
Armstrong pipe vise No. 231 - made in the USA - 1/8" to 1-1/2"
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies