tube plugs for sale, brand-new and used.

This is a listing for VWR Lab Dancer Vortex Mixer Multi Voltage 82019-172 (Made by IKA) 2800 RPM, For small containers up to 30 mm Diameter What you will get: VWR Lab Dancer Vortex Mixer Multi Voltage 82019-172 (Made by IKA), 2800 RPM, For small containers up to 30 mm Diameter Various interchangeable plugs for different countries that go onto the power adapter. Printout of the manual. Description: You will get

This is a listing for VWR Lab Dancer Vortex Mixer 115V 82019-172 (Made by IKA) 2800 RPM, For small containers up to 30 mm Diameter What you will get: VWR Lab Dancer Vortex Mixer 115V 82019-172 (Made by IKA), 2800 RPM, For small containers up to 30 mm Diameter Printout of the manual. Description: You will get a VWR Lab Dancer S41 (Made by IKA), 2800 RPM, For small containers up to 30 mm Diameter. See my other

This is a listing for VWR Lab Dancer S41 (Made by IKA), 2800 RPM, For small containers up to 30 mm Diameter What you will get: VWR Lab Dancer S41 (Made by IKA), 2800 RPM, For small containers up to 30 mm Diameter Printout of the manual from the link below. Description: You will get a VWR Lab Dancer S41 (Made by IKA), 2800 RPM, For small containers up to 30 mm Diameter. See my other

Dwyer Flex-Tube Seri

.product-item { border-bottom: 1px solid #dadad9; float: left; margin: 0 0 10px 0; display: inline-block; padding: 0 0 10px 95px; width: 100%; } .productListImage { float: left; margin: 0 20px 0 -95px; } .productListDetails { line-height: 1.3em; } .productListDetails a { background: 0; color: #0074d4; cursor: pointer; display: inline; font-family: "Lucida Grande","Trebuchet MS",Arial,Helvetica,sans-serif; font-siz

VHT Tube Tester 2 NEW In BOX AV-TT-TT2. New in box, never used. Model Number: AV-TT-TT2 • Includes two standard 8-pin octal-base adapters with dual banana plugs • Adapters accept all popular octal-base output tube types (6V6, 6L6, EL34, KT66, KT77, KT88, 6550, etc.) • Two high-quality 3" diameter metal and glass analog milliamp meters (100mA max)

Hickok 539A Tube Tester for parts or repair, the tester powers on and I tried testing a couple tubes but the test meter does not register any movement, the Line and Bias meters appear to function just fine but the MICROMHOS meter needle does not move, it is not known if the meter is bad or if there is another issue.

$4.90 each or best offer ($4.90 x 6) 3/4" Male Straight [swagelok cross reference 1210-1-12] 3/8 x 1/4 tube adapter [6-ta-1-4] 3/4 x 1/2 male elbow [1210-2-8] 3/8 x 1/4 union [600-6-4]

This is the rectangular tube ONLY, 2" x 3" these are extruded aluminum, originally made for the new latest generation delta table saw, but works with the angle iron rails used on all biesemeyer table saw fences- the bolt slots are in the correct position centered at 5/16 and 1/2" from the front and rear edges. You can also use these to make a custom fence for almost any saw using your own angle iron and a biesemeyer t square fence unit..

VHT AV-TT-TT2 Tube Tester 2

This kit includes the hardware and wire needed to build a set of test probes for Heathkit Vacuum Tube Volt Meters (VTVM's) requiring 3 Leads (V-4/5/6/7 and A Models as well as the IM-32) and many others that use a 1/4" phone style meter connection for DC and Banana Plugs for the Ground/Common and AC/Ohms Leads. One probe is for DC Measurement (with the resistor installed) and the other probe is for AC/Ohms Measurement, and a 3rd lead is the ground lead and has an Alligator Clip.

You are bidding on a NEW old stock 3M SLiC tm AERIAL TERMINAL with TYCO DTerminator Blocks .. Measures 30 inches long and has appox 5 inch opening at each end .. has 2 coiled rubber seals for each end with 3 plugs for different size cable , comes with instructions and has 2 ground cables ?

For sale is a used water sparay tube and the end plugs removed from a working Hoshizaki ice machine model KM-500-MAE. This part has no holes or cracks in the plastic. A little cleaning and it is ready to be reinstalled.

THESE ARE FROM 1962 MILITARY LOTNEW IN BOXES