tubing ferrule for sale, brand-new and used.

SS PILOT HEAD # 51-1036, 1/4" CCT. W/ NUT & FERRULE. CAN USE WITH: 1/4" CCT, 36" LONG, COPPER CLAD STEEL PILOT TUBING, CAN BEND TO SHAPE, # 26-1590 MUST ORDER COMPRESSION NUTS AND FERRULES SEPERATELY.

EBAYNEWTST BRASS PIPE FITTINGS LOT MRO NPT COMPRESSION UNIONS TEES ELBOWS FREE SHIP NR! All Are NEW, Never Used Condition! Sizes Range.

These are used in very good condition regulators by Swagelok UK. These have a rated input of 3600 PSI and a low pressure rating of 0-25 PSI. These are high purity and high sensitivity valves.

Description

Assortment of Pinchoff and Ferrule Crimp Tools Used in Good Working Condition. (1) Imperial Eastman HVAC 105-FF Pinch Off Tool for 1/4", 3/8", and 1/2", (1) Vise Grip Pinch Off Tool, and (1) Vise Grip Hose Ferrule Crimp Tool for 1/2" and 3/8" hose ferrules used on C02 and Soda plastic tubing. $6.80 Priority Small Flat Rate Box shipping to US 50 States.

Parker Metru-Lok FBMB12-1/2 Male Connector 12mm Tube Size x 1/2"MNPT Thread Size A one piece, ready to use, bite type fitting. Preassembled fitting with captive ferrule. No presetting of the ferrule is necessary.

Untitled Document Swagelok® 1/4" OD. Port Connector x 1/4" OD. Tube Adapter 316 Stainless Steel Instrumentation Grade Manufacture Part No.

The 97131 Vari-Drop® applicator is low cost hand, manually controlled held valve suitable for dispensing low to medium viscosity products. The adjusting screw allows repeatable dispense from drops to heavy beads. The quantity applied is dependent upon on the stroke set for the trigger, and how long the operator holds down the trigger.

6,000 PSI Single Ferrule Compression Tube Fitting - CPI™ Series

6,000 PSI Single Ferrule Compression Tube Fitting - CPI™ Series

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ " 4 " (102mm)STAINLESS STEEL SANITARY WELD FERRULE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! FAST SHIPPING !!!!!!!!!!!!!! DETAILS/FAQ'S INFO:(*****) -QUANTITY -1PC STAINLESS STEEL BUTT WELD FERRULE - ITEM(S) ILLUSTRATED IN PICTURE IS OF SAME AND EQUAL QUALITY.

Dixon 179-0606 Brass Hose Splicer Fitting, Tee, 3/8" Hose ID Barbed This Dixon 179-0606 brass hose splicer tee fitting is suitable for joining three hoses. This tee fitting is T-shaped and has three openings to connect and branch three hoses, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented as A x B x C.

Specifications Type/Shape 90 deg. Elbow Union Connector Connection Type 1

NEW LOT OF 10 THOMAS & BETTS LT975P 3/4" 90° BULLET NONMETALLIC CONNECTORS FOR LIQUIDTIGHT FNMC TYPE B

The Waters® Performance Maintenance Kit for the 2690 Separations Module contains all the Waters Quality Parts® necessary to keep your instrument operating at peak performance on an annual basis.

2 x 304 4" stainless steel tri clamps with long weld ferrules they are new but have been in a box and moved around a bit so they are not show room perfect they are very use able and have some bumps and scratches no dents or bends and are perfectly round and true. weld surface is good and so is the sealing surface