I also have another 8560e for 800$ less that comes with a partial cal. everything measures dead on and works perfectly except the avg noise floor is about 1-2 db over spec on the high band (perfectly within spec on the 30 hz to 2.9 ghz range). if you need a good budget analyzer then ask about that one !
Rental option as well for only 200$ a month. Also I can have the phase noise or spurious noise measurements installed on a free mass memory module before shipment for no extra cost! thats an 800 $ value !
COMES WITH OPTION 7 : Digitized fast time domain sweeps (FAST ADC)aka faster zero span sweep This is a 30 hz to 6.5 ghz hp spectrum analyzer , but with the optional mixers from someone else, you can achieve 40ghz + testing! or even up to 110 ghz with other mixers this is a steal! you wont beat this price!
this unit goes up to 26.9 ghz thanks to the option 26 it has installed which is a very valuable and high demand option. it increases the signal to noise ratio and gives it about 7 db lower noise floor past 22 ghz. and the amplitude accuracy is dead on with the option.
F40i ARC VOLTAGE WIRE FEED UNIT The F40i compact is an Arc Voltage MIG wire feeder which plugs directly onto CC or CV power sources such as engine driven welder generators &
Terex - Amida Model: AL4060D4MH (AL4000 D1 Series) Light Tower.Engine: Kubota D905-E Diesel Generator: 6 kW 60Hz(2) 120v plug ports and (1) 240v plug port12,156 hours (which is nothing for this Kubota diesel engine)Tires are in good condition! - Very well maintained and always serviced on time. - Engine runs great, quiet, and smooth.
I repair, calibrate and upgrade these units as well as provide parts so better buy from me because if you have any issues down the line, I will charge you half or less what a dealer or standard repair center will charge. I'll beat anyone's repair price guaranteed! and past buyers get a special discount!
free face cover and mass memory module with buy it now purchase this unit is far better than the 8594e, only advantage of 8594e is you can add certain otps not available to this machine , tho there are other opts not available to 8594e as well that you can get on this one, also 8594e is lighter weight by 10 lbs and has a crt output monitor . this doesnt. 10 db lower noise floor on this one and narrower bandwidths than the 8594e even with opt 130 narrow res bw.
external tracking generator 300khz to 2.9 ghz made for this model available for an extra 1000$. pics show sensitivity at -130 db signal and phase noise function as well as signal purity at 26.5 ghz , amplitude is dead on accurate since the cable gets exactly 3 db of loss at that frequency. this one has option 6 30 hz freq extension, and its in the rack version, you cant beat the price for the quality!
8565ec lcd type screen available as well for an extra 2000$, let me know if you want that one. if you need a Nist certified ISOxxxx, fully automated calibration with data , that can be done for an extra 300$> Currently has option 7 digitized fast time domain sweeps/fast adc BUT, I can include option 6 the 30 hz freq extension and opt 8 the signal id for external mixing function for an extra 400$.
free mass memory module with buy it now purchase and brand new calibration w cert ! this unit is far better than the 8594e, only advantage of 8594e is you can add certain opts not available to this machine , tho there are other opts not available to 8594e as well that you can get on this one, also 8594e is lighter weight by 10 lbs and has a crt output monitor . this doesnt.
F40i ARC VOLTAGE WIRE FEED UNIT The F40i compact is an Arc Voltage MIG wire feeder which plugs directly onto CC or CV power sources such as engine driven welder gener
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
