unc 1 1/4 for sale, brand-new and used.

You are bidding on 5 Helicoil Inserters, Made in the USA by Heli-Coil. The sizes and quantity are 1- 6-32 UNC 3- 4-40 UNC 1- 2-56 UNC They are in good condition.

Magnecraft 93AX-34 Relay 115VAC 10A 2 Pole Double Throw 8 Pin All Function New Old Stock Lot 6578 THREAD CLASS 2B SINGLE MOUNTING FACILITY OVERALL LENGTH 2.000 INCHES NOMINAL

7" Diameter 17" Overall Length 10mm Segment Height 1 1/4 - 7 UNC Thread Run Wet or Dry What can I cut with this core bit?.. Brick (w/ Iron Pigment)

CrazyLister

Spiral Point Tap Tap Size: 1-3/8-6Thread Standard: UNCNumber of Flutes: 4Thread Limit: GH4Material: HSSE-V3Finish: Black

Union Butterfield 1541(NPT) High-Speed Steel Pipe Tap, Medium Hook, Uncoated (Bright) Finish, Round Shank With Square End, 1"-11.5 Thread Size

USED (Great Condition) Look at the detailed Pics. OSG - 1122500 - Hand Taps Series/List: 101/102 Thread Size (Inch): 1/2-13 Features and Benefits Plug chamfers are the most commonly used chamfer and designed for efficiently threading through and blind holes. They have 3 to 5 threads.

Forney 20896 Taper Tap Industrial Pro HSS UNC, 3/4-Inch-by-10

Recoil - 1/4-20 UNC, 1/2 Inch OAL, Free Running Helical Insert QTY.44 EX7103044 WAS .77 EACH NOW .45 EACH $19.80 TOTAL

U.S. Govt paid $10,600 for this motor. MOTOR,ALTERNATING CURRENT NSN: 6105-01-228-1995 Item Name: MOTOR,ALTERNATING C Definition: A motor which is designed for operation from an alternating current source.

4" Diameter 17" Overall Length 10mm Segment Height 1 1/4 - 7 UNC Thread Run Wet or Dry What can I cut with this core bit?.. Brick (w/ Iron Pigment) Block

Electric Core Drill, 3-Speed, Wet / Dry with Vacuum Dust Extraction Port, For coring holes of up to 6" diameter. Load Speeds: 510-1150-2500 RPM, 19.5 Amps., Wgt: 15 lbs. Model ETN 162/3 P is a versatile Wet or Dry Diamond Core Drill with a Water Swivel and Dust Extraction Port built directly into the spindle.

Osg Straight Flute Bottom Tap, 1/4-20 UNC

1/4-20 GH3 HIGH SPEED STEEL 3 FLUTE SPIRAL POINT PLUG TAP Made in USA 61169 Technical Specifications Type HPT High Performance Tap Class Fractional Brand Name MORSE® Cutting Tools Flute Type Spiral Point Finish TiCN Style UNC - Unified Coarse Thread Series Pitch Diameter Limit H3

Regal 4-40 Spiral Flute Tap Chamfer: BottomingThread Limit: H7Number of Flutes: 2Thread Length: 9/16"Overall Length: 1-7/8"Thread Standard: UNC

Regal 4-40 Spiral Point Tap Chamfer: PlugThread Limit: H8Number of Flutes: 2Thread Length: 9/16"Overall Length: 1-7/8"Thread Standard: UNCDi

AARG Reliability Indicator Not established

As shown in picture; 25 pieces of 1/2-13 nylon/plastic hex nuts. They meas