+ Post new Ad
Unit Tool Punch & Die Sharpener - Unit - AM15271, US $130 – Picture 0
Unit Tool Punch & Die Sharpener - Unit - AM15271, US $130 – Picture 0

Unit Tool Punch & Die Sharpener - Unit - Am15271

US $130

  • Cleveland, Ohio, United States
  • Nov 25th
Open on mobile:
QR code
UNIT TOOL Punch & Die Sharpener/Grinder — Used — AM15271   Model:  PDS870 Specifications: Bench Type Model Capable Of Working With Up To 2.625” Diameter Punches & Dies Includes: 1/2-HP Drive Motor Electrical: 115/230 Volt, 60 Hz, Single Phase *****  This item is available, subject to prior sale. ***** All freight & transportation charges are the buyer's responsibility. Please specify your freight carrier of preference and we will ship it billed to your account.  Otherwise we can assist with getting a competitive freight rate and add it to the invoice once you approve the amount.  ***** Note:   We do not charge fees for standard palletizing, handling or loading.  However, we will have to charge a fee if special domestic palletizing or crating is required.  Please also note that some domestic freight companies now require crating and we have to pass this along. *****  International crating and certifications are processed separately and must be approved prior to purchase.   *****   UNLESS SPECIFIED, ALL SHIPMENTS ARE F.O.B. ONE OF OUR TWO CLEVELAND, OHIO AREA LOCATIONS. BROOK PARK, OH  44142  |  WESTLAKE, OH  44145 __New Arrivals Daily!__   Terms and Conditions:   Used items sold hereunder are neither designed nor manufactured by the seller, and this sale of these items is on an as-is and without any representations or warranties, expressed or implied, of any kind including safety, condition, or quality.     Seller further assumes no responsibility to provide safety devices or equipment necessary for the protection of the user or to comply with applicable government laws or requirements.  It is agreed and understood that purchaser assumes this responsibility and the above is an integral part of this sale.     All sales are F.O.B. Cleveland, Ohio unless otherwise specified.  

Directions

Similar products from Punch Tool Sets & Dies

GREENLEE KNOCKOUT HOLE PUNCH & DIE SET with BOLT 5014722 5004006

GREENLEE KNOCKOUT HOLE PUNCH & DIE SET with BOLT 5014722 5004006

  • Brookston, Texas, United States
  • Nov 28th
GREENLEE KNOCKOUT HOLE PUNCH & DIE 1 1/8'' 5003990 5003991

GREENLEE KNOCKOUT HOLE PUNCH & DIE 1 1/8'' 5003990 5003991

  • Brookston, Texas, United States
  • Nov 28th
Vintage 1/8in Machine cut Steel Numbers Sears Roebuck and Co. 37912 orginal box

Vintage 1/8in Machine cut Steel Numbers Sears Roebuck and Co. 37912 orginal box

  • Madison, South Dakota, United States
  • Nov 27th
Young Bros Letter Stamp Set 3/16 Steel USA New

Young Bros Letter Stamp Set 3/16 Steel USA New

  • Utica, Michigan, United States
  • Nov 26th
Young brothers stamps 1/2

Young brothers stamps 1/2

  • Spokane, Washington, United States
  • Nov 26th
Vintage Norway Made 1" Die Stock Wrench - Holds Up to 7 Dies

Vintage Norway Made 1" Die Stock Wrench - Holds Up to 7 Dies

  • Garden City, Idaho, United States
  • Nov 25th
HHIP 8016-0004 -80766 1/4" Width Number and Letter Stamp Set (0-9 and A-Z)

HHIP 8016-0004 -80766 1/4" Width Number and Letter Stamp Set (0-9 and A-Z)

  • Valencia, Pennsylvania, United States
  • Nov 23rd
LOT of 4 - Hand Punch Kits: 15pcs; Tool + 7 Punches & 7 Dies

LOT of 4 - Hand Punch Kits: 15pcs; Tool + 7 Punches & 7 Dies

  • Kingston, Ontario, Canada
  • Nov 23rd
URREA 3/4" DIAMETER X 8" LENGTH ROUND BRASS PUNCH

URREA 3/4" DIAMETER X 8" LENGTH ROUND BRASS PUNCH

  • San Antonio, Texas, United States
  • Nov 22nd
12 Pieces Hanson 3/8" Steel Numbers Stamping Set 9 to 20

12 Pieces Hanson 3/8" Steel Numbers Stamping Set 9 to 20

  • Paramount, California, United States
  • Nov 21st
Vintage unused 27 piece letter punch set with wood storage !!!

Vintage unused 27 piece letter punch set with wood storage !!!

  • Belleville, New Jersey, United States
  • Nov 21st
HANSON 20200 1/8" STEEL LETTER STAMP SET

HANSON 20200 1/8" STEEL LETTER STAMP SET

  • Clinton, Massachusetts, United States
  • Nov 21st
No.B-5 or No. 99- B-5 OK Jr Round Die Screw Plate Greenfield Tap and Die Corp

No.B-5 or No. 99- B-5 OK Jr Round Die Screw Plate Greenfield Tap and Die Corp

  • Palermo, Maine, United States
  • Nov 21st
STRIPPIT AMADA THIN TURRET + PLUS SYMBOL STAMP PUNCH DIE 1-1/4" STATION

STRIPPIT AMADA THIN TURRET + PLUS SYMBOL STAMP PUNCH DIE 1-1/4" STATION

  • Queen Creek, Arizona, United States
  • Nov 21st
STRIPPIT AMADA THIN TURRET NEGATIVE MINUS SYMBOL STAMP PUNCH DIE STRIPPER

STRIPPIT AMADA THIN TURRET NEGATIVE MINUS SYMBOL STAMP PUNCH DIE STRIPPER

  • Queen Creek, Arizona, United States
  • Nov 21st
Unipunch Edge Notcher Notch 3.00" Depth x 3.00" Wide B Series

Unipunch Edge Notcher Notch 3.00" Depth x 3.00" Wide B Series

  • Queen Creek, Arizona, United States
  • Nov 21st

People who viewed this item also vieved

DUMONT MINUTE MAN BROACH 10-10A COMBINATION SET

DUMONT MINUTE MAN BROACH 10-10A COMBINATION SET

  • Sterling Heights, Michigan, United States
  • Jan 30th
slater broach

slater broach

  • Etobicoke, Ontario, Canada
  • Jan 30th
Kennametal A3R04 00M04P00DF KC5025 Carbide Grooving Inserts (QTY 8) (K387)

Kennametal A3R04 00M04P00DF KC5025 Carbide Grooving Inserts (QTY 8) (K387)

  • Dallas, Texas, United States
  • Jan 30th
ISCAR T290 LNMT 100405TR IC808 50PCS

ISCAR T290 LNMT 100405TR IC808 50PCS

  • zilina, Slovakia
  • Jan 30th
three KENNAMETAL SDCT43PDFR8LD SDCT1204PDFRLD KC705 INSERT a6

three KENNAMETAL SDCT43PDFR8LD SDCT1204PDFRLD KC705 INSERT a6

  • Gardena, California, United States
  • Jan 30th
FIVE KENNAMETAL SDCT438FNLE SDCT120432FNLE KC410 INSERT a7

FIVE KENNAMETAL SDCT438FNLE SDCT120432FNLE KC410 INSERT a7

  • Gardena, California, United States
  • Jan 30th
Cleveland Center cut end mill

Cleveland Center cut end mill

  • Dunnellon, Florida, United States
  • Jan 30th
1/8" Wm. F. Hurst Solid Carbide 4 Flute End Mill (K187)

1/8" Wm. F. Hurst Solid Carbide 4 Flute End Mill (K187)

  • Dallas, Texas, United States
  • Jan 30th
(#4126C) Used Machinist 5/8 Inch Cap Screw Straight Shank Counter Bore

(#4126C) Used Machinist 5/8 Inch Cap Screw Straight Shank Counter Bore

  • Warren, Michigan, United States
  • Jan 30th
(#3411C) New Machinist 4mm X 0.75 Right Hand Thread Non-Adjustable Style Die

(#3411C) New Machinist 4mm X 0.75 Right Hand Thread Non-Adjustable Style Die

  • Detroit, Michigan, United States
  • Jan 30th
(#4646) Used Machinist USA Made .378 inch MT Shank Reamer

(#4646) Used Machinist USA Made .378 inch MT Shank Reamer

  • Troy, Michigan, United States
  • Jan 30th
(#4793) Used Machinist USA Made 7/16 Inch Carbide Tipped Chucking Reamer

(#4793) Used Machinist USA Made 7/16 Inch Carbide Tipped Chucking Reamer

  • Troy, Michigan, United States
  • Jan 30th
16" DAKE/JOHNSON No. F-16 Band Saw NEW (28403)

16" DAKE/JOHNSON No. F-16 Band Saw NEW (28403)

  • Cincinnati, Ohio, United States
  • Jan 30th
BAHCO TOOLS HOLESAW 2" HOLE SAW CARBIDE TIPPED 3832-51 51MM ~NEW

BAHCO TOOLS HOLESAW 2" HOLE SAW CARBIDE TIPPED 3832-51 51MM ~NEW

  • Hays, North Carolina, United States
  • Jan 30th
Machinists 11/30 BUY NO Nice 3/8 HSS Set B Beutifully reground tool bits READ

Machinists 11/30 BUY NO Nice 3/8 HSS Set B Beutifully reground tool bits READ

  • Lutz, Florida, United States
  • Jan 30th
One Straight Flute Engraving Bits--2A, Tipsize 0.5mm, OVL 38mm, Full-angle 25mm

One Straight Flute Engraving Bits--2A, Tipsize 0.5mm, OVL 38mm, Full-angle 25mm

  • ??, ??, China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies