US Chemical Storage SUPERloc Model SL0806 29 sq. ft. hazmat storage shed, US $9,750.00 – Picture 0

US Chemical Storage SUPERloc Model SL0806 29 sq. ft. hazmat storage shed, US $9,750.00 – Picture 1

Us Chemical Storage Superloc Model Sl0806 29 Sq. Ft. Hazmat Storage Shed

US $9,750.00

Portland, Oregon, United States
Jan 30th

Open on mobile:
QR code

The gold standard in hazardous chemical storage! This US Chemical Storage SUPERloc Model SL0806 29 sq. ft. prefabricated hazardous material storage building is in excellent condition, has been stored indoors since it was purchased new in 2007, and is fully functional. Much cheaper than buying new, and every bit as effective for your chemical storage needs. Includes original Building Manual & Maintenance Schedule and original manufacturer's quote with all building specifications. The unit includes the following built-in accessories: Electrical Distribution Panel - 100A capacity, 6 spaces. Dry Chemical Fire Suppression System - FM approved for class A, B, and C fires. Explosion Proof Light - interior. Portable Eyewash - 16-gallon capacity. Loading Ramp - rated for 275 lbs per sq ft. Manufacturer's Product Description: SUPERLOC - 4 HOUR FIRE RATED CHEMICAL STORAGE - FM OR WARNOCK HERSEY APPROVED FOUR HOUR BI-DIRECTIONAL FIRE RATED BUILDINGS FOR SAFE AND COMPLAINT HAZMAT CHEMICAL AND PRODUCT STORAGE SUPERloc™ is the standard 4-hour fire rated, bi-directional hazardous material and chemical storage building that allows for storage located within 10' from and even inside your facility (check with local authorities about any variance allowances). This location advantage allows for faster production, distribution and storage of your valuable flammables and combustibles. An interior location also allows sensitive material and chemical storage without the added expense of temperature control. SUPERloc™ is manufactured from heavy gauge steel with a leak-proof built-in secondary containment sump & can be manufactured with FM or Warnock Hersey Approval. 4 HOUR FIRE RATED STORAGE BUILDINGS BENEFITS Insurance policy renewals, fines and hazardous spills are all very important reasons to maintain compliant chemical storage. The SUPERloc™ offers unmatched strength that will guarantee years of compliant use. This 4-hour Fire Rated building can be modified to include a variety of optional accessories and customize your storage solution. Explosion relief construction can even be included to allow for Class 1A flammable chemical storage and/or mixing of Class 1B flammable chemicals. SUPERloc™ is the perfect 4 hour fire rated storage building for you and your company to achieve compliance and make your manufacturing and storage more efficient. STANDARD FEATURES: Full Storage: 145000 Lb Bldg Weight: 9,009 Lbs Exterior Dimensions: 7'4" x 6'2" x 9'4" Interior Dimensions: 6'0" x 4'10" x 7'6" Sump Load: 1,000+ PSF Door Load: 25 PSF Snow Load: 40 PSF Floor Load: 500 PSF Wind Load: 130 MPH Exp. C Seismic: Zone 4 6 Drums / 29 Sq. Ft. / 108.4 Gallons Sump Capacity SUPERloc conforms to the above design factors unless noted otherwise on drawings as directed per local and state codes. *Accessories may alter building weight and dimensions. When located 0-10ft away from other facilities, roads or property lines, fire rating is not necessary for flammable and combustible chemicals. Should the building require heating or cooling systems, the walls and ceiling/roof would have to be insulated. The exposed insulation material should be covered for mechanical protection. The can be achieved by steel liner and/or gypsum board. When fire rating is required gypsum type x is used. WALL STRUCTURAL FRAMEWORK: Four (4) hour bi-directional fire rated noncombustible weatherproof construction that meets or exceeds UL 263 & ASTM E-119, with mineral wool insulation, multiple layers of UL Classified fire-resistant gypsum wallboard encased between interior and exterior heavy gauge Galvanneal sheet steel for maximum durability. Gypsum wallboard layers are offset with overlapping joints for maximum fire resistance. Conforms to NFPA 30 standards. Structure fabricated from 3” x 2” x 1/8” steel structural or mechanical tubing members placed on 24-inch on center. Building perimeter has 6”x3”x3/16” steel tubing below and above wall studs. The corner studs and door frame opening studs are 3”x3”x3/16”. Framework connected by welding. All framing members shall be mechanical or structural tubing; formed ROOF SYSTEM: Four (4) hour fire rated Class A flame spread rating, wind uplift exceeds UL Rating I-60 and constructed of 4-hour fire rated weather proof noncombustible construction. Roof Structural System is fabricated from 3.5” x 3.5” x 1/8”” structural steel or mechanical tubing. Roof supports installed 24” inches on center. Exterior roof sheets are continuously welded to roof supports at each seam. All framing members are mechanical or structural tubing; formed channels or studs are not acceptable. 12 gauge steel roof with mineral wool insulation, multiple layers of UL Classified fire resistant gypsum wallboard lined with heavy gauge Galvanneal steel sheets. Meets or exceeds UL 263 & ASTM-E119. Roof sloped to facilitate rain run off and other weathering conditions. FLOOR SYSTEM: Grating and Leak Proof Spill-Containment Sump Assembly is a 6” inch high assembly consisting of 1” inch deep welded steel floor grating over 6” inch deep leak proof secondary containment sump. Continuous steel floor grating throughout building, fabricated from welded steel grating with 1 x 3/16” bearing bars at 1 x 3/16” inches on center and crossbars at 4 inches on center. Grating material is galvanized steel. Sump is fabricated utilizing continuously welded 10 gauge steel sheets for maximum spill containment. Chemical-resistant acrylic alkyd enamel coating is applied to secondary containment sump. Floor System is fabricated to comply with NAAMM MBG 531, “Metal Bar Grating Manual for Steel, Stainless Steel, and Aluminum. BUILDING BASE: Open channel construction, underside coated with chemical resistant corothan I-Coal Tar for maximum corrosion resistance. Forklift pockets and hold-down brackets for ease of off-loading and relocation. Building base framing is capable of withstanding 1000 psf minimum. The building base is constructed in this manner to ensure the fork lifting, loading, transporting, offloading, and relocation do not affect this chemical storage building. This is to ensure the door openings remain square after lifting the building multiple times with a crane or fork trucks. The building base assembly shall consist of the following materials: 6 x 4 x 3/16” rectangular tubing, Hold Down Brackets welded to building are 1/2 ” thick plate steel angles, Floor Channel C. STATIC GROUNDING SYSTEM: One exterior grounding connection, one 10-foot long 5/8” diameter copper-clad steel grounding rod, and grounding lugs. GRAVITY AIR FLOW VENTS: UL listed with 3 hour rated fire dampers with UL listed 165 degree fusible links. Dampers include louvers and screens to provide airflow and have a galvanized steel frame and curtain type. Building Finish: After an extensive cleaning process the interior and exterior surfaces are protected with a high solids alkyd universal metal primer (primer) and a high solid acrylic alkyd enamel top coat providing proven interior chemical resistance as well as exterior abrasion, corrosion, UV resistance and exceptional durability. SIGNAGE: Permanent D.O.T. metal flip placard with rust proof aluminum holder and stainless steel clips on each building. One (1) pressure sensitive NFPA 704 Hazard Rating sign. APPROVALS: This unit will have Warnock Hersey Approval. Third party and/or state approvals are available and are not included in unless noted. Accessories may increase exterior dimensions. Color: Standard Color is Bleached Bone unless noted otherwise. Terms of Sale: The items listed are the exact items pictured. They have not been stringently tested, and may or may not meet original manufacturer’s specifications. Nevertheless, we try to the best of our ability to describe the physical appearance, the general working condition, and to provide an accurate description of the item that is being sold. Please contact us if you would like an exact measurement, more pictures of the equipment, or if you would like to arrange to inspect the equipment in person. ALL ITEMS ARE SOLD AS IS, WITH ABSOLUTELY NO WARRANTY OR RETURN. IF YOU DO NOT AGREE TO THE SALE UNDER THESE CONDITIONS PLEASE DO NOT PURCHASE THE ITEMS. If you have any questions, please contact us for more information. Our goal is to provide the purchaser with as much information as possible. Payment: Payment is mandatory upon pickup. We accept cash, PayPal and any major credit card or E-check via Pay Pal. Shipment: Items are ready for local pickup. Purchaser is responsible for all shipping and handling, including any applicable insurance, taxes, tariffs or duties. Purchaser must schedule their own Freight/Local Pickup. Items not scheduled for pickup within 14 days of the auction closing will be considered unsold and may be re-sold at the seller's discretion.

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Excellent condition, barely used. Has been stored indoors since it was purchased new in 2007. Unit has never been subjected to any chemical spills, fires, or impacts. Fully functional. A few minor cosmetic flaws and scuffs in outer paint.”