+ Post new Ad
Used- C.W. Brabender 6" Wide Sheet Line Consisting of: (1) C.W. Brabender approx, US $7900 – Picture 0
Used- C.W. Brabender 6" Wide Sheet Line Consisting of: (1) C.W. Brabender approx, US $7900 – Picture 0

Used- C.w. Brabender 6" Wide Sheet Line Consisting Of: (1) C.w. Brabender Approx

US $7900

  • Bensenville, Illinois, United States
  • May 29th
Open on mobile:
QR code
Used- C.W. Brabender 6" Wide Sheet Line Consisting of: (1) C.W. Brabender approx Click To Enlarge Used- C.W. Brabender 6" Wide Sheet Line Consisting of: (1) C.W. Brabender approximate 0.75" diameter single screw extruder, approximate 24 to 1 L/D ratio. 3 Zone non-vented barrel electrically heated, air cooled (no blowers). Water cooled feed throat with hopper. Driven by a 5 hp, 180 volt, 2500 rpm DC motor thru a Sm-Cyclo reducer, ratio 17 to 1. Type 1002 control panels. (1) 6" Wide sheet die. (1) Killion 3 roll sheet stack. (3) 5" Diameter x 8" wide cored rolls, pneumatically adjustable, (1) 5" diameter x 8" wide metal, (1) 5" diameter x 8" wide rubber pull rolls, pneumatically adjustable. Both driven by a 1 hp, 180 volt, 1725 rpm DC motor thru a reducer, ratio 20 to 1. Includes a Seco DC drive. Serial# 7852. ref #: 47923001 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

Used- Wor-tex Granulator, Model UP-755, Carbon Steel. Approximately trough-put u

Used- Wor-tex Granulator, Model UP-755, Carbon Steel. Approximately trough-put u

  • Bensenville, Illinois, United States
  • May 29th
Used- Teca-Print Pad Printing Machine, Model TC 500. Maximum print 130mm diamete

Used- Teca-Print Pad Printing Machine, Model TC 500. Maximum print 130mm diamete

  • Bensenville, Illinois, United States
  • May 29th
Used- Henschel Mixer Cooler Combination. Consisting of: (1) Thyssen Henschel 10

Used- Henschel Mixer Cooler Combination. Consisting of: (1) Thyssen Henschel 10

  • Bensenville, Illinois, United States
  • May 29th
Used- Tote Tilter/Dumper, 304 Stainless Steel. Approximate 50" Wide x 48" Long x

Used- Tote Tilter/Dumper, 304 Stainless Steel. Approximate 50" Wide x 48" Long x

  • Bensenville, Illinois, United States
  • May 29th
Used- RotoGran Granulator, WO Series. Approximate 14" x 18" Feed, 3 bolt on slan

Used- RotoGran Granulator, WO Series. Approximate 14" x 18" Feed, 3 bolt on slan

  • Bensenville, Illinois, United States
  • May 29th
Used- Nelmor Grinder, Model G1436MR. Approximate 14" x 36" feed. 3 knife closed

Used- Nelmor Grinder, Model G1436MR. Approximate 14" x 36" feed. 3 knife closed

  • Bensenville, Illinois, United States
  • May 29th
Used- Cumberland Grinder. Approximate 24" x 18" feed with tilt pelican style hop

Used- Cumberland Grinder. Approximate 24" x 18" feed with tilt pelican style hop

  • Bensenville, Illinois, United States
  • May 29th
Used- RML Commander Grinder, Model TS1-SH-16--316-20. Staggered blade rotor. Dri

Used- RML Commander Grinder, Model TS1-SH-16--316-20. Staggered blade rotor. Dri

  • Bensenville, Illinois, United States
  • May 29th
Used- Cumberland Grinder, Size 24, Approximate 24" x 16" Feed Throat. 3 Knife op

Used- Cumberland Grinder, Size 24, Approximate 24" x 16" Feed Throat. 3 Knife op

  • Bensenville, Illinois, United States
  • May 29th
Used- Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) B

Used- Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) B

  • Bensenville, Illinois, United States
  • May 29th
Used- Improved Blow Molder, Model B15-R35. Approximate 2" diameter extruder, ele

Used- Improved Blow Molder, Model B15-R35. Approximate 2" diameter extruder, ele

  • Bensenville, Illinois, United States
  • May 29th
Used- BBA Chiller Drum Cooler, Model CCC-40/60. Throughput up to 250kg (approxim

Used- BBA Chiller Drum Cooler, Model CCC-40/60. Throughput up to 250kg (approxim

  • Bensenville, Illinois, United States
  • May 29th
Used- Dynisco Jet Cleaner, Model JC1724E. Approximately 20" diameter x 27" long

Used- Dynisco Jet Cleaner, Model JC1724E. Approximately 20" diameter x 27" long

  • Bensenville, Illinois, United States
  • May 29th
Used- Gamma Meccanica Horizontal Underwater Water Ring Pelletizer, Model TFD 250

Used- Gamma Meccanica Horizontal Underwater Water Ring Pelletizer, Model TFD 250

  • Bensenville, Illinois, United States
  • May 29th
Harvard Factory Automation Inc HFA Part Separator

Harvard Factory Automation Inc HFA Part Separator

  • Broomfield, Colorado, United States
  • May 29th
Used- EDI Extrusion Dies 64" Wide Ultraflex Fast Gap Extrusion Die, Model UHRC-2

Used- EDI Extrusion Dies 64" Wide Ultraflex Fast Gap Extrusion Die, Model UHRC-2

  • Bensenville, Illinois, United States
  • May 29th
New PCB Heated Heat Bed 12V 24V Dual Power Compatible for 3D Printer Red LF

New PCB Heated Heat Bed 12V 24V Dual Power Compatible for 3D Printer Red LF

  • Hong Kong, Hong Kong
  • May 29th
2*PC4 M6 Fittings+2M PTFE Teflon Tube RepRap 3D Printer

2*PC4 M6 Fittings+2M PTFE Teflon Tube RepRap 3D Printer

  • Oradell, New Jersey, United States
  • May 29th
Desco Bench Top Ionizer /w heat A60408-1

Desco Bench Top Ionizer /w heat A60408-1

  • West Bloomfield, Michigan, United States
  • May 29th
Filament Cartridge Read/Write Driver Cable. (Tested with a Stratasys cartridge)

Filament Cartridge Read/Write Driver Cable. (Tested with a Stratasys cartridge)

  • East Amherst, New York, United States
  • May 29th

People who viewed this item also vieved

Injection mold - Hayward swimming pool skimmer lid and escutcheon molds

Injection mold - Hayward swimming pool skimmer lid and escutcheon molds

  • Clifton Park, New York, United States
  • Feb 15th
Toshiba Molding Machine Pullscale FM65SFSBH New

Toshiba Molding Machine Pullscale FM65SFSBH New

  • Murrieta, California, United States
  • Feb 15th
Digital in-, output card, Philips No. 940478003472, DIO47 Ferromatik PMC 1000/2

Digital in-, output card, Philips No. 940478003472, DIO47 Ferromatik PMC 1000/2

  • Pegnitz, Germany
  • Feb 17th
Amplifier card Bosch No. B830302078, Ferromatik

Amplifier card Bosch No. B830302078, Ferromatik

  • Pegnitz, Germany
  • Feb 17th
Master Unit Die Molds (Injection Molds)

Master Unit Die Molds (Injection Molds)

  • Haledon, New Jersey, United States
  • Feb 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies