+ Post new Ad
Used- Gamma Meccanica Horizontal Underwater Water Ring Pelletizer, Model TFD 250, US $5600 – Picture 0
Used- Gamma Meccanica Horizontal Underwater Water Ring Pelletizer, Model TFD 250, US $5600 – Picture 0

Used- Gamma Meccanica Horizontal Underwater Water Ring Pelletizer, Model Tfd 250

US $5600

  • Bensenville, Illinois, United States
  • May 29th
Open on mobile:
QR code
Used- Gamma Meccanica Horizontal Underwater Water Ring Pelletizer, Model TFD 250 Click To Enlarge Used- Gamma Meccanica Horizontal Underwater Water Ring Pelletizer, Model TFD 250, 304 Stainless Steel. Maximum operating temperature 250 degrees C. Approximate 5" diameter 4 head cutter (only equipped with 2 blades), die plate, driven by a 1.5 kw, 3/50/380/2840 rpm motor. Stainless steel cooling section, approximate 40" long x 14" wide x 8-1/2" deep. Spin dryer approximate 10" diameter x 40" long screening chamber, driven by a 3.5 kw, 3/50/220-240/1410 rpm motor. Approximate 30" diameter x 34 straight side holding tank with pump driven by a 0.5 HP, 3/50/2875 rpm motor. Side mounted control panel with Eurotherm drive. Extra die. Frame mounted. Serial# 5.M43C280.001. Built 1998. ref #: 48073006 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

Used- RotoGran Granulator, WO Series. Approximate 14" x 18" Feed, 3 bolt on slan

Used- RotoGran Granulator, WO Series. Approximate 14" x 18" Feed, 3 bolt on slan

  • Bensenville, Illinois, United States
  • May 29th
Used- Nelmor Grinder, Model G1436MR. Approximate 14" x 36" feed. 3 knife closed

Used- Nelmor Grinder, Model G1436MR. Approximate 14" x 36" feed. 3 knife closed

  • Bensenville, Illinois, United States
  • May 29th
Used- Cumberland Grinder. Approximate 24" x 18" feed with tilt pelican style hop

Used- Cumberland Grinder. Approximate 24" x 18" feed with tilt pelican style hop

  • Bensenville, Illinois, United States
  • May 29th
Used- RML Commander Grinder, Model TS1-SH-16--316-20. Staggered blade rotor. Dri

Used- RML Commander Grinder, Model TS1-SH-16--316-20. Staggered blade rotor. Dri

  • Bensenville, Illinois, United States
  • May 29th
Used- Cumberland Grinder, Size 24, Approximate 24" x 16" Feed Throat. 3 Knife op

Used- Cumberland Grinder, Size 24, Approximate 24" x 16" Feed Throat. 3 Knife op

  • Bensenville, Illinois, United States
  • May 29th
Used- Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) B

Used- Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) B

  • Bensenville, Illinois, United States
  • May 29th
Used- C.W. Brabender 6" Wide Sheet Line Consisting of: (1) C.W. Brabender approx

Used- C.W. Brabender 6" Wide Sheet Line Consisting of: (1) C.W. Brabender approx

  • Bensenville, Illinois, United States
  • May 29th
Used- Improved Blow Molder, Model B15-R35. Approximate 2" diameter extruder, ele

Used- Improved Blow Molder, Model B15-R35. Approximate 2" diameter extruder, ele

  • Bensenville, Illinois, United States
  • May 29th
Used- BBA Chiller Drum Cooler, Model CCC-40/60. Throughput up to 250kg (approxim

Used- BBA Chiller Drum Cooler, Model CCC-40/60. Throughput up to 250kg (approxim

  • Bensenville, Illinois, United States
  • May 29th
Used- Dynisco Jet Cleaner, Model JC1724E. Approximately 20" diameter x 27" long

Used- Dynisco Jet Cleaner, Model JC1724E. Approximately 20" diameter x 27" long

  • Bensenville, Illinois, United States
  • May 29th
Harvard Factory Automation Inc HFA Part Separator

Harvard Factory Automation Inc HFA Part Separator

  • Broomfield, Colorado, United States
  • May 29th
Used- EDI Extrusion Dies 64" Wide Ultraflex Fast Gap Extrusion Die, Model UHRC-2

Used- EDI Extrusion Dies 64" Wide Ultraflex Fast Gap Extrusion Die, Model UHRC-2

  • Bensenville, Illinois, United States
  • May 29th
New PCB Heated Heat Bed 12V 24V Dual Power Compatible for 3D Printer Red LF

New PCB Heated Heat Bed 12V 24V Dual Power Compatible for 3D Printer Red LF

  • Hong Kong, Hong Kong
  • May 29th
2*PC4 M6 Fittings+2M PTFE Teflon Tube RepRap 3D Printer

2*PC4 M6 Fittings+2M PTFE Teflon Tube RepRap 3D Printer

  • Oradell, New Jersey, United States
  • May 29th
Desco Bench Top Ionizer /w heat A60408-1

Desco Bench Top Ionizer /w heat A60408-1

  • West Bloomfield, Michigan, United States
  • May 29th
Filament Cartridge Read/Write Driver Cable. (Tested with a Stratasys cartridge)

Filament Cartridge Read/Write Driver Cable. (Tested with a Stratasys cartridge)

  • East Amherst, New York, United States
  • May 29th
Cascade Forklift Push Attachment Cat. No 35E-QPB-Q002 R-2 15" x 48" Platens Used

Cascade Forklift Push Attachment Cat. No 35E-QPB-Q002 R-2 15" x 48" Platens Used

  • Dalton, Georgia, United States
  • May 29th
Filabot ABS 3D Printing Smoothing Pen

Filabot ABS 3D Printing Smoothing Pen

  • Ionia, Michigan, United States
  • May 29th
3D Systems ThermoJet Solid Object 3d Printer

3D Systems ThermoJet Solid Object 3d Printer

  • Gainesville, Florida, United States
  • May 29th
12v 40w Ceramic Cartridge Heater for 3D Printer Extruder Hot-End 6mm 20mm tube

12v 40w Ceramic Cartridge Heater for 3D Printer Extruder Hot-End 6mm 20mm tube

  • Austin, Texas, United States
  • May 29th

People who viewed this item also vieved

Digital in-, output card, Philips No. 940478003472, DIO47 Ferromatik PMC 1000/2

Digital in-, output card, Philips No. 940478003472, DIO47 Ferromatik PMC 1000/2

  • Pegnitz, Germany
  • Feb 17th
Amplifier card Bosch No. B830302078, Ferromatik

Amplifier card Bosch No. B830302078, Ferromatik

  • Pegnitz, Germany
  • Feb 17th
Master Unit Die Molds (Injection Molds)

Master Unit Die Molds (Injection Molds)

  • Haledon, New Jersey, United States
  • Feb 17th
Engel Molding Machine Transducer Pull Scale 02220-0642 New

Engel Molding Machine Transducer Pull Scale 02220-0642 New

  • Murrieta, California, United States
  • Feb 17th
Engel Molding Machine Transducer Pull Scale 02220-0281 022054 New

Engel Molding Machine Transducer Pull Scale 02220-0281 022054 New

  • Murrieta, California, United States
  • Feb 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies