+ Post new Ad
Used Sandvik 13 Piece Carbide Tipped Hole Saw Kit, US $1300 – Picture 0
Used Sandvik 13 Piece Carbide Tipped Hole Saw Kit, US $1300 – Picture 1
Used Sandvik 13 Piece Carbide Tipped Hole Saw Kit, US $1300 – Picture 2
Used Sandvik 13 Piece Carbide Tipped Hole Saw Kit, US $1300 – Picture 3
Used Sandvik 13 Piece Carbide Tipped Hole Saw Kit, US $1300 – Picture 0
Used Sandvik 13 Piece Carbide Tipped Hole Saw Kit, US $1300 – Picture 1
Used Sandvik 13 Piece Carbide Tipped Hole Saw Kit, US $1300 – Picture 2
Used Sandvik 13 Piece Carbide Tipped Hole Saw Kit, US $1300 – Picture 3

Used Sandvik 13 Piece Carbide Tipped Hole Saw Kit

US $1300

  • Davenport, Iowa, United States
  • Jan 30th
Open on mobile:
QR code
This is a used Sandvik 13 piece carbide tipped hole saw kit EDI # 55493. There are 9 hole saws: 3/4" - 2 1/2".  Some show more use than others. The worst saw is the 1 1/8" with a few carbide tips chipped. Adapter directions for the saws are on the inside of the lid. The kit box is a hard plastic measuring 9 x 7 x 2 1/2. This kit will be mailed (POSTAGE FREE) by USPS Priority Mail Medium Flat Rate Box with $50.00 Insurance and Tracking to the lower 48 States only. If there are any questions contact my email before bidding. Thank you.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Sandvik
MPN EDI 55493
Model 13 Piece Hole Saw kit
Country/Region of Manufacture United States

Directions

Similar products from Saws & Sawblades

Eight (8) 4" re-sharpened Niagara Cutter Inc Milling Cutters 1 1/4" and 1" bore

Eight (8) 4" re-sharpened Niagara Cutter Inc Milling Cutters 1 1/4" and 1" bore

  • Lenox, Massachusetts, United States
  • Jan 30th
metal cutting bandsaw blade Lenox 88-1/2" x 1" x .035,6/8 VP VR

metal cutting bandsaw blade Lenox 88-1/2" x 1" x .035,6/8 VP VR

  • Amsterdam, New York, United States
  • Jan 30th
(QTY 30) Starrett Hacksaw Blades 12" x 18 TPI - Grey-Flex GF 1218- 3 pks of 10ea

(QTY 30) Starrett Hacksaw Blades 12" x 18 TPI - Grey-Flex GF 1218- 3 pks of 10ea

  • Long Beach, California, United States
  • Jan 30th
Grizzly Bandsaw Insert 5-PACK RED

Grizzly Bandsaw Insert 5-PACK RED

  • Draper, Utah, United States
  • Jan 30th
CHAMPION CT7P-SET-6 Carbide Tipped Hole Cutter Electrical Conduit Set, 5-Piece

CHAMPION CT7P-SET-6 Carbide Tipped Hole Cutter Electrical Conduit Set, 5-Piece

  • Las Vegas, Nevada, United States
  • Jan 30th
MILWAUKEE 48-00-5037 12" 6TPI SAW BLADES - 4ct

MILWAUKEE 48-00-5037 12" 6TPI SAW BLADES - 4ct

  • Brooklyn, New York, United States
  • Jan 30th
lot of new slitting saws.

lot of new slitting saws.

  • Woburn, Massachusetts, United States
  • Jan 30th
Doall C-4100

Doall C-4100

  • Frankfort, Illinois, United States
  • Jan 30th
vintage lot of 10 MF high speed blu-flex hacksaw blades no.1224bf

vintage lot of 10 MF high speed blu-flex hacksaw blades no.1224bf

  • Astoria, New York, United States
  • Jan 30th
DeWalt DWM120K corded handheld bandsaw

DeWalt DWM120K corded handheld bandsaw

  • La Junta, Colorado, United States
  • Jan 30th
MACHINIST LATHE MILL Lot of Saw Slitting Gear Cutting Key Way Blade s for Mill g

MACHINIST LATHE MILL Lot of Saw Slitting Gear Cutting Key Way Blade s for Mill g

  • Morris Plains, New Jersey, United States
  • Jan 30th
New Norton Metal Cut-off Blade 8" 7640

New Norton Metal Cut-off Blade 8" 7640

  • Hialeah, Florida, United States
  • Jan 30th
Norton Cut Off Wheel-Metal 12"x1/8"x1" 89356

Norton Cut Off Wheel-Metal 12"x1/8"x1" 89356

  • Hialeah, Florida, United States
  • Jan 30th
Keller Power Hacksaw

Keller Power Hacksaw

  • Savannah, Tennessee, United States
  • Jan 30th
Doall bandsaw blade Silencer 1/2"X.035"X5-8X175" welded

Doall bandsaw blade Silencer 1/2"X.035"X5-8X175" welded

  • Montgomery, Minnesota, United States
  • Jan 30th
Carbide hole cutter compleat kit This setup is for round surfices or any surfice

Carbide hole cutter compleat kit This setup is for round surfices or any surfice

  • Hammonton, New Jersey, United States
  • Jan 30th
BOSH JIGSAW BLADES 2 - 3/4 14 TPI

BOSH JIGSAW BLADES 2 - 3/4 14 TPI

  • Tampa, Florida, United States
  • Jan 30th
NEW SteelMax 9 Inch Stainless Steel Metal Cutting Saw Blades NEW - PK #E023

NEW SteelMax 9 Inch Stainless Steel Metal Cutting Saw Blades NEW - PK #E023

  • Trenton, New Jersey, United States
  • Jan 30th
4x Grit 80 Diamond Cutting Disc Saw Blade Cut Off Wheel DIY Craft Jewelry Tool

4x Grit 80 Diamond Cutting Disc Saw Blade Cut Off Wheel DIY Craft Jewelry Tool

  • Shenzhen, China
  • Jan 30th
NOS Starrett BS1214 BS1224 Hacksaw Blades 12"-14T & 12"-24T Lot of 62 Blades

NOS Starrett BS1214 BS1224 Hacksaw Blades 12"-14T & 12"-24T Lot of 62 Blades

  • Denver, Colorado, United States
  • Jan 30th

People who viewed this item also vieved

10pcs Iscar DNMA 441 IB66 CBN tip insert DNMA 150604 T hardened steel DNMG 441

10pcs Iscar DNMA 441 IB66 CBN tip insert DNMA 150604 T hardened steel DNMG 441

  • Slaskie, Poland
  • Jan 30th
10pcs Iscar DCMW 3(2.5)2 CBN tip insert DCMW 11T308 hardened steel DCMT 3(2.5)2

10pcs Iscar DCMW 3(2.5)2 CBN tip insert DCMW 11T308 hardened steel DCMT 3(2.5)2

  • Slaskie, Poland
  • Jan 30th
8 PCS 3/8" END MILLS 4 FLUTE CARBIDE ENDMILL MADE IN USA

8 PCS 3/8" END MILLS 4 FLUTE CARBIDE ENDMILL MADE IN USA

  • Pewaukee, Wisconsin, United States
  • Jan 30th
5 PCS 3/8" END MILLS 2 FLUTE HIGH PERFORMANCE CARBIDE ENDMILL

5 PCS 3/8" END MILLS 2 FLUTE HIGH PERFORMANCE CARBIDE ENDMILL

  • Pewaukee, Wisconsin, United States
  • Jan 30th
1 NEW 6 MM SHANK CARBIDE BURRS FOR CUTTING ALUMINUM. METRIC. MADE IN USA {F760}

1 NEW 6 MM SHANK CARBIDE BURRS FOR CUTTING ALUMINUM. METRIC. MADE IN USA {F760}

  • Mentor, Ohio, United States
  • Jan 30th
7 NEW 1/4" (.250) SHANK CARBIDE BURRS FOR CUTTING ALUMINUM. USA MADE {F759}

7 NEW 1/4" (.250) SHANK CARBIDE BURRS FOR CUTTING ALUMINUM. USA MADE {F759}

  • Mentor, Ohio, United States
  • Jan 30th
(#5050) New Machinist American Made 6mm Chucking Reamer

(#5050) New Machinist American Made 6mm Chucking Reamer

  • Troy, Michigan, United States
  • Feb 13th
(#5052) New Machinist American Made 5mm Chucking Reamer

(#5052) New Machinist American Made 5mm Chucking Reamer

  • Troy, Michigan, United States
  • Feb 13th
Vintage Roper Whitney 8-6 Hole Punch Hand Metal Working Tool

Vintage Roper Whitney 8-6 Hole Punch Hand Metal Working Tool

  • Bennington, Kansas, United States
  • Feb 22nd
6 G.D.T Adjustable DIE G.D.T & F E Wells & Sons 3/8, 5/16, 1/4, 3/4, 5/8, 1/2

6 G.D.T Adjustable DIE G.D.T & F E Wells & Sons 3/8, 5/16, 1/4, 3/4, 5/8, 1/2

  • Cedar Park, Texas, United States
  • Feb 22nd
10 NTK ceramic inserts Square 5/16 x 5/16 x 3/32 thick cnc lathe mill shop T4N

10 NTK ceramic inserts Square 5/16 x 5/16 x 3/32 thick cnc lathe mill shop T4N

  • Warren, Michigan, United States
  • May 13th
New 5 Pcs - CNGA433FW Grade KY4400 Gold Coated Ceramic Inserts Kennametal

New 5 Pcs - CNGA433FW Grade KY4400 Gold Coated Ceramic Inserts Kennametal

  • Cincinnati, Ohio, United States
  • May 14th
2pcs High Quanlity CNC Router Cleaning Bottom Woodworking Tools Bits 6mm x25mm

2pcs High Quanlity CNC Router Cleaning Bottom Woodworking Tools Bits 6mm x25mm

  • Shandong, China
  • Jun 4th
5pc Double Flute Straight Endmill Tool CNC Router Bits FOAM MDF PVC WOOD 6 32mm

5pc Double Flute Straight Endmill Tool CNC Router Bits FOAM MDF PVC WOOD 6 32mm

  • Shandong, China
  • Jun 5th
Hougen 12114 7/16x1 cutter

Hougen 12114 7/16x1 cutter

  • Lompoc, California, United States
  • May 25th
Hougen 12138 1-3/16x1 cutter

Hougen 12138 1-3/16x1 cutter

  • Lompoc, California, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies