+ Post new Ad
Used Shopsmith used half inch Router Chuck, US $200 – Picture 0
Used Shopsmith used half inch Router Chuck, US $200 – Picture 1
Used Shopsmith used half inch Router Chuck, US $200 – Picture 2
Used Shopsmith used half inch Router Chuck, US $200 – Picture 0
Used Shopsmith used half inch Router Chuck, US $200 – Picture 1
Used Shopsmith used half inch Router Chuck, US $200 – Picture 2

Used Shopsmith Used Half Inch Router Chuck

US $200

  • West Chester, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
Here we have a used 1/2 inch ShopSmith Router Chuck in good usable condition.  Check pictures and ask questions before bidding.  Thanks.  Buyer to pay $6.00 sh.  Thanks for looking.
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “shows wear but still a good tool.”

Directions

Similar products from Boring Chucks

Morse Taper Drill Chuck Arbor MT3 to JT6 with Tang End

Morse Taper Drill Chuck Arbor MT3 to JT6 with Tang End

  • San Gabriel, California, United States
  • Jan 30th
Classic Plus Keyless Drill Chuck R8 Shank 1/8-5/8" New

Classic Plus Keyless Drill Chuck R8 Shank 1/8-5/8" New

  • San Gabriel, California, United States
  • Jan 30th
Combo Edge Center Finders 3/8" Shank Dia .200" Tip Dia

Combo Edge Center Finders 3/8" Shank Dia .200" Tip Dia

  • San Gabriel, California, United States
  • Jan 30th
Cushman C500BB 3JT 0-1/2" Capacity Drill w/Key Chuck & 4MT 3JT Arbor Used Bin 06

Cushman C500BB 3JT 0-1/2" Capacity Drill w/Key Chuck & 4MT 3JT Arbor Used Bin 06

  • Spokane, Washington, United States
  • Jan 30th
**NEW** MAKITA 3/8" CHUCK 1.5 -- 10mm CAP & CHUCK KEY 763081-0 *FREE SHIP USA*

**NEW** MAKITA 3/8" CHUCK 1.5 -- 10mm CAP & CHUCK KEY 763081-0 *FREE SHIP USA*

  • Clinton Township, Michigan, United States
  • Jan 30th
JACOBS 18 BALL BEARING SUPER DRILL CHUCK 3/4" CAP 1/2" STRAIGHT SHANK W/ KEY

JACOBS 18 BALL BEARING SUPER DRILL CHUCK 3/4" CAP 1/2" STRAIGHT SHANK W/ KEY

  • Ellington, New York, United States
  • Jan 30th
JACOBS NO 3A DRILL CHUCK 5/8" CAPACITY W/ 3MT SHANK

JACOBS NO 3A DRILL CHUCK 5/8" CAPACITY W/ 3MT SHANK

  • Ellington, New York, United States
  • Jan 30th
Jacobs 14N Drill Chuck MT4 Metal Lathe Machinist Tool Southbend Clausing Leblond

Jacobs 14N Drill Chuck MT4 Metal Lathe Machinist Tool Southbend Clausing Leblond

  • Yorktown, Virginia, United States
  • Jan 30th
Jacobs Chuck 6A 0-1/2"

Jacobs Chuck 6A 0-1/2"

  • Boyertown, Pennsylvania, United States
  • Jan 30th
Craftsman Keyless chuck MT-1 Taper

Craftsman Keyless chuck MT-1 Taper

  • Boyertown, Pennsylvania, United States
  • Jan 30th
Jacobs Chuck No. 7 Part No A0102 MT-1 Taper 0-1/4"

Jacobs Chuck No. 7 Part No A0102 MT-1 Taper 0-1/4"

  • Boyertown, Pennsylvania, United States
  • Jan 30th
Jacobs 18N Super Drill Chuck MT4 Metal Lathe Machinist Tool Southbend Clausing

Jacobs 18N Super Drill Chuck MT4 Metal Lathe Machinist Tool Southbend Clausing

  • Yorktown, Virginia, United States
  • Jan 30th
BROWN & SHARPE No 13 GRINDER RADIUS WHEEL DRESSER

BROWN & SHARPE No 13 GRINDER RADIUS WHEEL DRESSER

  • Bay Village, Ohio, United States
  • Jan 30th
STARN TOOL AND MFG TWIN WHEEL DRESSER MEADVILLE PA TOOLMAKER MACHINIST SURFACE

STARN TOOL AND MFG TWIN WHEEL DRESSER MEADVILLE PA TOOLMAKER MACHINIST SURFACE

  • Bay Village, Ohio, United States
  • Jan 30th
FLUIDMOTION ANGLE & RADIUS WHEEL DRESSER SURFACE GRINDER TOOL & CUTTER GRINDE

FLUIDMOTION ANGLE & RADIUS WHEEL DRESSER SURFACE GRINDER TOOL & CUTTER GRINDE

  • Bay Village, Ohio, United States
  • Jan 30th
Jacobs #4 series drill press chuck key vintage

Jacobs #4 series drill press chuck key vintage

  • Grayson, Kentucky, United States
  • Jan 30th
MACHINIST KEYLESS DRILL CHUCK

MACHINIST KEYLESS DRILL CHUCK

  • Staten Island, New York, United States
  • Jan 30th
Rohm 1/64 - 5/16 Drill Chuck w/ Key

Rohm 1/64 - 5/16 Drill Chuck w/ Key

  • Fort Wayne, Indiana, United States
  • Jan 30th
Jacobs 31038 Keyless Drill Chuck - 1/2" 13MM - All Metal

Jacobs 31038 Keyless Drill Chuck - 1/2" 13MM - All Metal

  • Ogden, Utah, United States
  • Jan 30th
Jacobs 31048 Keyless Drill Chuck - 1/2" 13MM - Soft Rubber Grip

Jacobs 31048 Keyless Drill Chuck - 1/2" 13MM - Soft Rubber Grip

  • Ogden, Utah, United States
  • Jan 30th

People who viewed this item also vieved

KENNAMETAL CAT40 3/4" ENDMILL HOLDER CV40EM075375 CAT 40 END MILL LOT C11665

KENNAMETAL CAT40 3/4" ENDMILL HOLDER CV40EM075375 CAT 40 END MILL LOT C11665

  • Dayton, Ohio, United States
  • Mar 6th
(3) CAT 40 Tool Holders: Valenite End Mill, Parlec and Lyndex Jacobs Taper

(3) CAT 40 Tool Holders: Valenite End Mill, Parlec and Lyndex Jacobs Taper

  • Rocky Point, New York, United States
  • Mar 6th
NEW #4 MORSE TAPER BORING BAR 100581-2 WITH 11/16 PILOT , FREE SHIPPING!!!

NEW #4 MORSE TAPER BORING BAR 100581-2 WITH 11/16 PILOT , FREE SHIPPING!!!

  • Salt Lake City, Utah, United States
  • Mar 10th
MGEHR1010-1.5 10x100L Lathe External Grooving Toolholder For 1.5mm Width MGMN150

MGEHR1010-1.5 10x100L Lathe External Grooving Toolholder For 1.5mm Width MGMN150

  • ???, ???, China
  • Mar 10th
TMX PAFANA MCLNR 12-4B 3/4"X3"OAL INDEXABLE INSERT TOOL HOLDER LATHE

TMX PAFANA MCLNR 12-4B 3/4"X3"OAL INDEXABLE INSERT TOOL HOLDER LATHE

  • Fort Myers, Florida, United States
  • Mar 12th
TMX PAFANA PER 0750-K16 3/4"X4"OAL INDEXABLE INSERT TOOL HOLDER LATHE LEFT HAND

TMX PAFANA PER 0750-K16 3/4"X4"OAL INDEXABLE INSERT TOOL HOLDER LATHE LEFT HAND

  • Fort Myers, Florida, United States
  • Mar 12th
MORSE TAPER ADAPTER--No. 5 TO No. 4

MORSE TAPER ADAPTER--No. 5 TO No. 4

  • Monticello, Mississippi, United States
  • Mar 26th
Horizontal Brideport (Right Angle) Milling Attachment Arbor Support R8

Horizontal Brideport (Right Angle) Milling Attachment Arbor Support R8

  • South El Monte, California, United States
  • Mar 26th
Browning 2517x15/16 Taper Bore Bushing !44C!

Browning 2517x15/16 Taper Bore Bushing !44C!

  • Saint Louis, Missouri, United States
  • Apr 28th
DANLY STEEL DIE PRESS MOLD DEMOUNTABLE SHOULDER BUSHING 1-1/2" X 3-3/16"

DANLY STEEL DIE PRESS MOLD DEMOUNTABLE SHOULDER BUSHING 1-1/2" X 3-3/16"

  • Clover, South Carolina, United States
  • Apr 29th
Centaur RDF 100 Acura-Flex Collet, 35/64"

Centaur RDF 100 Acura-Flex Collet, 35/64"

  • Abingdon, Maryland, United States
  • May 24th
Collis BT40 1" End Mill Tool Holder

Collis BT40 1" End Mill Tool Holder

  • Brownsburg, Indiana, United States
  • May 24th
BT40 2" Shell Mill Toolholder

BT40 2" Shell Mill Toolholder

  • Brownsburg, Indiana, United States
  • May 24th
ISCAR Chamring 0512-W1.00-09 with Iscar DCM Indexable Drill - Coolant Thru

ISCAR Chamring 0512-W1.00-09 with Iscar DCM Indexable Drill - Coolant Thru

  • Wilmette, Illinois, United States
  • May 25th
DORIAN D40CA-4-CNC BORING BAR HOLDER 1-1/4"

DORIAN D40CA-4-CNC BORING BAR HOLDER 1-1/4"

  • Edison, New Jersey, United States
  • Jun 3rd
ALORIS CA2 & CA41 BORING BAR HOLDER

ALORIS CA2 & CA41 BORING BAR HOLDER

  • Edison, New Jersey, United States
  • Jun 3rd
Sunnen Honing Mandrel 5G-P28-1000VA 1" Hone

Sunnen Honing Mandrel 5G-P28-1000VA 1" Hone

  • Thomaston, Connecticut, United States
  • Jun 9th
Sunnen Hone 4G P28 1062 VA Mandrel w/ Stones, Shoes, Wedge, 4PL 1094 old number

Sunnen Hone 4G P28 1062 VA Mandrel w/ Stones, Shoes, Wedge, 4PL 1094 old number

  • Scottsdale, Arizona, United States
  • Jun 9th
3KW Square Air Cooled Spindle Motor ER20+3KW Inverter VFD 220V for CNC Router

3KW Square Air Cooled Spindle Motor ER20+3KW Inverter VFD 220V for CNC Router

  • Changzhou,Jiangsu, China
  • Oct 19th
BRIDGEPORT MANUAL 1-J 2-J HEAD KWIK SWITCH 200 SPINDLE

BRIDGEPORT MANUAL 1-J 2-J HEAD KWIK SWITCH 200 SPINDLE

  • Galvin, Washington, United States
  • Oct 20th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies