v bearing for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

This sale is for a quantity of 1 of the item pictured. 302032 Kit, #2 V-wheel bearing with eccentric bushing and mounting hardware. 3/8 id Kit includes one #2, V-wheel bearing with dual rubber seals, one eccentric bushing (stainless steel), one .032 flat washer, one hardened SAE washer, and one, 1/4-20 x 1 1/4, Steel alloy, Socket Head Cap Screw.

Click to Enlarge

Click to Enlarge

Nidec 12 V DC Brushless Motor Dual Ball Bearing Inner Rotor Internal Drive Specification: Motor Diameter: 35.8 MM Motor height: 40 MM Motor Weight: 156 g Output shaft: 4 MM Front axle length: 31 MM Rear axle length: 26 MM Cable length: about 150 MM Theoretical lifetime: 50,000 hours Note: Connection: Red wire=positive, blue and black wires =negative. (Can not wrong connect, If wrong connect, will damage the motor driver board) Test: Voltage: 7.2V Current: 0.14 A Speed: 1400 rpm Vol

New/other Rittal Top Therm fan-and-filter unit, complete kit with heavy duty ebmpapst fan, filter, filter medium, instructions & CD. This is the 3238.xxx kit -- fits 3238.100 and 3238.200 (same exact design, specs, fan, etc) and may fit others. HEAVY DUTY ebmpapst fan, model DV 4650-470 -- 230v These units were taken from brand new large Rittal enclosures that were damaged in shipping.

Detailed Product Description Electric power

4000 RPM Buhler Permanent Magnet 24 V DC Hobby Motor with Large Grooved Pulley New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 4 - 24 VDC No load speed at 24 VDC: 4,000 RPM No load current: 330 mA Starting current: 14.5 A Can be operated in either direction: simply reverse polarity of power supply Shaft dimensions: 14 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 9 mm Long x 25 mm Diameter Aluminum pulley features 4 grooves Dimensions (not in

Magnetek Universal Motor # 557 Mod.# HF3L028N permanent split capacitor , I think its brand new but I can't say for sure. RPM 1075 volts 208-230 amps 3.3 -2.0 speeds 2 bearing - ball rotation - elec rev

  GENERAL ELECTRIC GE 5KSP11FG952S FAN MOTOR MHP 35 208 V 1 PH 1550 RPM   ITEM DESCRIPTION:     GENERAL ELECTRIC Unit Bearing Motor,  NEW IN DISPLAY BOX, 1/30 HP, 1550 rpm Unit Bearing Motor, Shaded Pole, Open, 1/30 HP, 1550 Nameplate RPM, NEMA/IEC Frame Nonstandard, Voltage 208-230, Hz 60, 1 Phase, Full Load Amps 0.9, Output Watts 25, Service Factor 1.0, Max. Ambient Temp. 50 Degrees C, Rotation CCW   Out of production Replacement CENTURY 9654 $207.50      Click

Specification: Notice: The motor has 115°C Overheat Protection with front and rear ball bearing. And the generator's voltage is high, but its current is low, and it is about 150~200mA. Its surface has some scraches, but they don't affect its operation.

THIS A FASCO FAN MOTOR ASSY WAS ORIGINALLY TO BE USED IN A HIGH $$$ VENT HOOD. IT IS A SEALED BALL BEARING MOTOR AND HAS 1550 RPM AND 1300 RPM IT IS APROX 6 1/4 INCHES ACROSS MOUNTING PLATE THE FAN CAGE IS 5 1/4 BY 3 1/4 THIS 110 V FAN TYPE U7381. MODEL 71731126 THIS IS A 2 SPEED MOTOR.

universal electric co ser 1wa 29949 mod AF1h029NV 1 HP 208-230 v 60 HZ.89A 3000 RPM stock 371 thermally protected ball bearing use 4mfd 370 vac capacitor1/8hp cent sw max.2a at 120v rotation rev class b ins.max amb 40*c this is on the motor ..I thank is new it looks it

Fasco Electric Motor – NEW – Model D727 Model D727 Permanent Split Capacitor HP 1/3, 1/4, 1/5

Fasco Electric Motor – NEW – Model D603 Model D603 Shaded Pole HP 1/50 AMP 0.9

Marathon KSK 56B17D5570F Motor, 115/208-230 V, 60 HZ, 1.5 HP, 1725RPM

Eaton SC450 / 3037601 Industrial Clutch Drive - D.C.V. 90, D.C.A. 38 E