vacuum bellows for sale, brand-new and used.

Offered here is a NEW MDC Vacuum Inline Bellows Valve Guaranteed to be new and as described Information below is from MDC website. We cannot guarantee the accuracy. Please contact MDC to verify.

NW25 stainless steel flexible bellows No scratches or dents

I am selling 1 used stainless steel high vacuum bellows/flange. This piece is 3.5" long with an inside diameter of 2.25". The flange outside diameter is 5.5".

I am selling 1 used stainless steel high vacuum bellows/flange.  This piece is 3.25" long with an inside diameter of 2.25". The flange has an OD of 5.5" and has 4 bolt holes on each end.

BE 2013A / shelf 2B (LL) NOTICE TO BUYERS - if there are any delays in delivery - or any other problems - PLEASE - BEFORE opening a case, email or call us at 320-766-6888. We can usually remedy the situation immediately. ALSO if your shipping address is different than your registered PayPal address - be sure to contact us.

I am selling two bellows. These are new bellows, size 11 x 1/2 "

For sale is a used vacuum bellows, with a port 1.25" diameter on top and a 1/4" thick flange on the bottom. The drawing that is posted shows most of the specs, except that the bottom flange was changed from a rectangle to a circle of 4.0" diameter. We paid over $800 to have this custom-made for a machine which is no longer in use.

Five valves available. These are untested and as follows: 1 Opened without retail packaging2 Sealed in OEM packaging2 Opened retail packaging, but still sealed Manufacturer MDC Model IV-150-P-OPT-2

From the unneeded/unused parts bin, here's a stainless steel 48" vacuum hose with KF16 fittings. The only reason the plastic is cut on the packaging or the foam wrap was pulled back was so I could take photos of the ends for this auction -- otherwise, the caps have never been removed nor has this hose been used. This is not a braided hose -- I believe the construction is referred to as bellows.

HPS MKS 160 Series 162-0040K Inline Vacuum Bellows Valve ISO Flange Single Stage High Vacuum Pneumatic Inline Isolation ValveNW 40 ISO Flanges More information available on model 162-0040K at the link below.www.mksinst.com/docs/UR/150_160.pdf Feel free to ask any additional questions.

MKS HPS Right Angle High Vacuum Isolation Valve Series 152-0025K with NW-25 Flanges with Hoke pneumatic soft valve secondary stage (Soft Bypass) Type 304 stainless steel body and formed bellows made of 321 stainless steel Research University Surplus

VAC INC. STAINLESS STEEL VACUUM VALVE, NEW , NEVER INSTALLED. CAJON/VCR FITTINGS ON FLANGES, RIGHT ANGLE, BELLOWS FEED THROUGH, SS BODY BAKEABLE TO 450 DEGREES C.

Drager Accuro Multi Gas Sampling Vacuum Detector Tube Bellows Pump Counter you will get whats pictured - no additional accessories included. Feel free to email with any questions.

DESCRIPTION This is a NEW HIGH VACUUM FLEXIBLE BELLOWS. NEVER USED. TUBE SIZE: 4 GUARANTEED TO BE IN WORKING ORDER UPON ARRIVAL.