vacuum pump filter for sale, brand-new and used.

B.A. SS1 Float Switch -Overflow Safety Switch

B.A.S.S. DUCT KNIFE Better Quality- Better design

B.A. SS3 Float Switch -Overflow Safety Pan Switch

B.A.S.S. DUCT KNIFE Better Quality- Better design

B.A.S.S. DUCT KNIFE Better Quality- Better design

B.A.S.S. DUCT KNIFE Better Quality- Better design

Lot of 5 - B.A. SS2 Float Switch -Overflow Safety Switch

LOT of 5ea B.A. SS1 Float Switch -Overflow Safety Switch

You are bidding on a Yellow Jacket 93560 SuperEvac 6 CFM Vacuum Pump for Air conditioning Repairs. This pump is new and is in it's original packaging but the package has been opened. I think this may have been a display model.

Copper Tube Expander Up 1 5/8" OD

REFRIGERANT RECOVERY UNIT AND Vacuum Pump Pre-Filter-Drier Kit with HOSE, CAP and Brass Male Flare Adapter Protect that recovery unit and vacuum pump! WILL WORK ON THE FOLLOWING REFRIGERANTS; R12, R12a, R134a, R22, R22a, R404a, R410a, R502, ALL HFC,s

This Compressor/vacuum pump works as it should. It must be an older model since I can't find a spec. sheet on Thomas' website, but it appears to be similar to their 617 series units.

Becker Air Vacuum Pump Descriptions Type: SV 5.130/2 Used unit, good condition, pulled from the company out of business, clean and test good working. Please look over in the 8 photos for more detail. BECKER SV 5.130/2 AIR VACUUM PUMP with Air Filter Speed 3300 min-1 Motor Rating KW Volumen strom / inlet capacity 75 m3/h Vacuum - mbar Pressure + 300 mbar Local pick up free Used Unit.

Sklar - J.R.Tompkins (100-65) (Rotary Vane Vacuum Pump) For your consideration, a vintage medical/laboratory vacuum ( aspirator) pump, made by the J. Sklar Mfg. Co.,Long Island City, New York.

Brand new never used ..,..,............................ ....,Lid Dimensions: 10.75" by 3/4" thick Do not exceed 160F with this chamber This System Includes: (1) 3/4" thick clear acrylic lid (Extra thick, does not deflect under vacuum)) (1) Heat cured silicone gasket chemically resistant to solvents (Temp rated to 400F) (1) Nickel plated brass polypropylene ball valves.

This vacuum pump saw limited use for a year at a local woodworking factory. It was used to hold parts down on a large cnc router. It was serviced regularly during that time.

5 Gallon and 3 CFM Single Stage Vacuum Chamber Kit to Degass Silicones, Resins, Urethanes and Concentrates - Acrylic Lid All chambers are 100% tested prior to shipping Proudly designed and assembled in Chicago, IL