+ Post new Ad
Valve Seat Cutter 2-5/16 Inch Hardened Steel 45Deg, US $560 – Picture 0
Valve Seat Cutter 2-5/16 Inch Hardened Steel 45Deg, US $560 – Picture 0

Valve Seat Cutter 2-5/16 Inch Hardened Steel 45deg

US $560

  • New Delhi, India
  • May 24th
Open on mobile:
QR code
Valve Seat Cutter 2-5/16 Inch Hardened Steel 45Deg Product Description VINTAGE MORRIS, MERCEDES VALVE SEAT CUTTER 2-5/16 INCH HARDENED STEEL 45DEG. Grab this high quality brand new unused Valve Seat Cutter set -  essential tool for restoring Vintage Cars, Jeeps, Tractors and Motorcycles.   Manufactured in India using high quality carbon steel, properly hardened and tempered, each cutter in accurately grade for best results. This is must for Vintage Car and Bikes Restorers Product specifications: Size: 2-5/16” Degree: 45 WEIGHT-184g Applications: Suitable for all Vintage Cars, Jeeps, Tractors, Trucks and Motorcycles like Jeep, Vintage Morris, Mini, Mercedes, Perkins P-6, Leyland and many other. Please Note: These Valve Seat Cutters are not suited to modern hardened seats. These will cut only soft seats which came in most Vintage Car and Motor Bikes. Please note that the  valve cutter set are covered by grease to avoid rust, you need to clean before using. Loose Valve Cutters, Handles and Rods are also available at special request, we can also produce Valve Cutters in special sizes if required. inkfrog terapeak inkFrog Analytics

Directions

Similar products from Other Cutting Equipment & Expendables

GOODARD 6" x 5/16" x 1 1/4" STAGGERED TOOTH Side Milling Cutter HSS

GOODARD 6" x 5/16" x 1 1/4" STAGGERED TOOTH Side Milling Cutter HSS

  • Buffalo, Minnesota, United States
  • May 24th
MORSE No 5 - 11P 21 TO 25T Depth .196 Involute Gear Cutters HS -12 Gear Cutter

MORSE No 5 - 11P 21 TO 25T Depth .196 Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
MORSE No 5 - 9P 21 To 25T Depth .240 Involute Gear Cutters HS -12 Gear Cutter

MORSE No 5 - 9P 21 To 25T Depth .240 Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
B & S No 6 - 10P 17 TO 20T Involute Gear Cutters HS -12 Gear Cutter

B & S No 6 - 10P 17 TO 20T Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
NIAGARA 4" x 1" x 1 1/4" STAGGERED TOOTHSide Milling Cutter USED in EX CON

NIAGARA 4" x 1" x 1 1/4" STAGGERED TOOTHSide Milling Cutter USED in EX CON

  • Buffalo, Minnesota, United States
  • May 24th
MORSE 5" x 1/2" x 1 1/4" STAGGERED TOOTH Side Milling Cutter USED in EX CON

MORSE 5" x 1/2" x 1 1/4" STAGGERED TOOTH Side Milling Cutter USED in EX CON

  • Buffalo, Minnesota, United States
  • May 24th
B & S No 2 - 20P 55 To 134T .108 Depth Involute Gear Cutters HS -12 Gear Cutter

B & S No 2 - 20P 55 To 134T .108 Depth Involute Gear Cutters HS -12 Gear Cutter

  • Buffalo, Minnesota, United States
  • May 24th
Valve Seat Cutter 45 Degrees 3-1/16" Hardened Steel Vintage Jeep, Cars

Valve Seat Cutter 45 Degrees 3-1/16" Hardened Steel Vintage Jeep, Cars

  • New Delhi, India
  • May 24th
Valve Seat Cutter 3-1/16 Inches Hardened Steel 45 Deg

Valve Seat Cutter 3-1/16 Inches Hardened Steel 45 Deg

  • New Delhi, India
  • May 24th
Valve Seat Cutter Hardened Steel 2 - 7/8” Perkins P-6, Leyland 45 Degree

Valve Seat Cutter Hardened Steel 2 - 7/8” Perkins P-6, Leyland 45 Degree

  • New Delhi, India
  • May 24th
Hardened Steel Valve Seat Cutter 1-1/8” Perkins P-6, Leyland Engine

Hardened Steel Valve Seat Cutter 1-1/8” Perkins P-6, Leyland Engine

  • New Delhi, India
  • May 24th
New Valve Seat Cutter 1inch Harden Steel 45 Deg. - Vintage Morris, Mercedes

New Valve Seat Cutter 1inch Harden Steel 45 Deg. - Vintage Morris, Mercedes

  • New Delhi, India
  • May 24th
METAL KNURLING CUTTERS LOT, 6 PIECES RANDOM PATTERN FOR LATHES MILLING MACHINES

METAL KNURLING CUTTERS LOT, 6 PIECES RANDOM PATTERN FOR LATHES MILLING MACHINES

  • Mountain View, California, United States
  • May 24th
Quality Harden Steel Valve Seat Cutter 1 Inches Degree - 45

Quality Harden Steel Valve Seat Cutter 1 Inches Degree - 45

  • New Delhi, India
  • May 24th
Harden Steel Valve Seat Cutter 1-1/16 Inch 45 Degree for Best Quality Cutter

Harden Steel Valve Seat Cutter 1-1/16 Inch 45 Degree for Best Quality Cutter

  • New Delhi, India
  • May 24th
X 70 STEEL WEDGE SHIM SPACER 1" X 1" FOR 5/16 BOLT 1/4 TO 1/8 WEDGE NOS

X 70 STEEL WEDGE SHIM SPACER 1" X 1" FOR 5/16 BOLT 1/4 TO 1/8 WEDGE NOS

  • Vera, Oklahoma, United States
  • May 24th
Fellows #7 Type 7 High Speed Gear Shaver 240v 3 Ph Cutter

Fellows #7 Type 7 High Speed Gear Shaver 240v 3 Ph Cutter

  • Millstadt, Illinois, United States
  • May 24th
Valve Seat Cutter 3-1/8 Inch 45 Deg. Harden Steel for Car And Bike

Valve Seat Cutter 3-1/8 Inch 45 Deg. Harden Steel for Car And Bike

  • New Delhi, India
  • May 24th
Vintage Trucks 45 Degree Valve Seat Cutter 3-1/8” Harden Steel Quality

Vintage Trucks 45 Degree Valve Seat Cutter 3-1/8” Harden Steel Quality

  • New Delhi, India
  • May 24th
Valve Seat Cutter 45 Degree 3-1/8 Inches Harden Steel Quality

Valve Seat Cutter 45 Degree 3-1/8 Inches Harden Steel Quality

  • New Delhi, India
  • May 24th

People who viewed this item also vieved

Hassay-Savage 0.6565" Diameter Spline Pull Broach 26010

Hassay-Savage 0.6565" Diameter Spline Pull Broach 26010

  • Glassboro, New Jersey, United States
  • Jan 30th
Hassay-Savage 0.6545" Diameter Spline Pull Broach 33694-95

Hassay-Savage 0.6545" Diameter Spline Pull Broach 33694-95

  • Glassboro, New Jersey, United States
  • Jan 30th
SUMITOMO CARBIDE INSERTS TNMG 431 GRADE G10E PACK OF 8

SUMITOMO CARBIDE INSERTS TNMG 431 GRADE G10E PACK OF 8

  • New Oxford, Pennsylvania, United States
  • Jan 30th
TUNGALOY CERAMIC INSERTS RNGN33 T0525 GRADE LX11 2 SEALED PACKS

TUNGALOY CERAMIC INSERTS RNGN33 T0525 GRADE LX11 2 SEALED PACKS

  • New Oxford, Pennsylvania, United States
  • Jan 30th
NTK Ceramic Grooving Inserts VDB188 HC2 Qty 6 <1537C>

NTK Ceramic Grooving Inserts VDB188 HC2 Qty 6 <1537C>

  • Saint Louis, Missouri, United States
  • Jan 30th
NTK Ceramic Grooving Inserts VDB188 HC2 Qty 10 &lt;1537C&gt;

NTK Ceramic Grooving Inserts VDB188 HC2 Qty 10 <1537C>

  • Saint Louis, Missouri, United States
  • Jan 30th
5 NEW 5/32&#034; SHANK CARBIDE ENDMILLS. 2 FLUTE. DOUBLE END MADE IN THE USA {E977}

5 NEW 5/32" SHANK CARBIDE ENDMILLS. 2 FLUTE. DOUBLE END MADE IN THE USA {E977}

  • Mentor, Ohio, United States
  • Jan 30th
Solid Carbide Coating TiAlN 2Flute End Mills Cutting Dia 4mm Shank Dia 6mm HRC50

Solid Carbide Coating TiAlN 2Flute End Mills Cutting Dia 4mm Shank Dia 6mm HRC50

  • CN, China
  • Jan 30th
1-12 NF 1-7/8 hex die NEW Greenlee USA (930-29A)

1-12 NF 1-7/8 hex die NEW Greenlee USA (930-29A)

  • Oxford, Pennsylvania, United States
  • Jan 30th
1/4&#034; Hex Punch - 3/4&#034; Round Shank - New Old Stock

1/4" Hex Punch - 3/4" Round Shank - New Old Stock

  • Arlington, Texas, United States
  • Jan 30th
9/16&#034; Reground Taper Shank Reamer

9/16" Reground Taper Shank Reamer

  • Abingdon, Maryland, United States
  • Jan 30th
15/16&#034; Tapered Shank Reamer, Resharpened

15/16" Tapered Shank Reamer, Resharpened

  • Abingdon, Maryland, United States
  • Jan 30th
NOS! LOT of (6) Marvel 21&#034; POWER HACK SAW BLADES, No. 2106-T, 21&#034;x1-3/4&#034;x.088&#034;

NOS! LOT of (6) Marvel 21" POWER HACK SAW BLADES, No. 2106-T, 21"x1-3/4"x.088"

  • Bremen, Indiana, United States
  • Jan 30th
NOS! LOT of (2) GRIFFIN 24&#034; POWER HACK SAW BLADES, No. W24T4, 24&#034; x 2&#034; x 100-4T

NOS! LOT of (2) GRIFFIN 24" POWER HACK SAW BLADES, No. W24T4, 24" x 2" x 100-4T

  • Bremen, Indiana, United States
  • Jan 30th
BRAZED CARBIDE TIPPED TOOL BIT GR16 C6 LATHE TURNING 1&#034; USA GR-16

BRAZED CARBIDE TIPPED TOOL BIT GR16 C6 LATHE TURNING 1" USA GR-16

  • Tujunga, California, United States
  • Jan 30th
PFERD Rotary Tungsten Carbide Burr Bit L-3834

PFERD Rotary Tungsten Carbide Burr Bit L-3834

  • Island Lake, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies