Variable Frequency Drive Inverter Vfd 1.5kw 380v New 2

US $128.00

  • Door to door service,shanghai, China
  • Jan 29th
  Variable Frequency Drive Inverter VFD NEW 2HP 1.5KW  380V This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be used as a motor speed control and a phase converter.The inpute for this VFD is 1 or 3 phase as you like.You can control different speed when you use this VFD.Most of our customers bought this VFD from us to use for:Lathes,Mill,car Hoists,Pumps&conveyors,etc.This item use sine wave PWN(SPWM) for the control system and performace excellently. Technical Paramer 1.Inpute voltage:380V±15%(we also stock 110V and 220V+/-15%,please contact us for item stock) 2.Output voltage:380VAC±15%(analogous to input voltage) 3.Input Frequency:48-63HZ 4.Outpute Frequency:0-400HZ 5.Inpute phase:1 phase or 3 phase 6.Outpute phase:3phase 7.warranty:1 year (we also stock 4KW 7A, 2.2KW 10A 220-250V, 3KW 220-250V and 380V modol, please contact us for stock ) Basic Connection Diagram Detail Parameter: Control Mode SPWM Input Power 380V class:380±15%(we also stock 220V item, please contact us for stock) 5-Digits Display & Status Indicator Lamp Displaying frequency, current, revolution, voltage, counter, temperature, FOR or REV rotation, and fault, etc. Communication Control RS-485 Working Temperature -10~40℃ Humidity 0-95% Relative Humidity(without dew) Vibration Below 0.5G Frequency Control Range 0.1~2500.0Hz Accuracy Digital: 0.1%(-10~40℃); Analog: 0.1% (25±10℃) Setting Resolution Digital: 0.1Hz; Analog: 1‰ of max. Operating frequency Output Resolution 0.1Hz Operator Setting Method Press directly ←∧∨ to set. Analog Setting Method External Voltage 0-5V,0-10V,4-20mA,0-20mA. Other Functions Frequency lower limit, starting frequency, stopping frequency, three skip frequencies can be respectively set. General Control Ramp Control Selectable 4-speed steps ramp-up and -down time (0.1-6500s). V/F Curve Set V/F curve at will. Torque Control Torque increase settable by max. 10.0%. The starting torque can reach 150% at 1.0Hz. Multi-Inputs 6 multi-function input terminals for 8–speed steps control, program operation, switching of 4-speed Ramp, UP/DOWN function, counter, external emergency stop and other functions. Multi-Outputs 5 multi-output for displaying of running, zero speed, counter, external abnormity, program operation and other information and warnings. Other Functions Auto Voltage Regulation(AVR), Decelerating Stop or Coasting Stop, DC Braking, Auto Reset and Restart, Frequency Track, PLC Program Control, Traverse Control, Drawing Control?Auto Energy Saving, Carrier Adjustable (Up to 20KHz), etc. Protection Functions Overload Protection Electronic relay protection motor drive FuseProtection When the fuse breaks , the motor will stop. Over-voltage 220V class:DC Voltage >400V We also stock 380V item, contact us about stock 380V class:DC Voltage >800V Under-voltage 220V class:DC Voltage
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Huanyang
MPN HY1.5KW
Model HY-1.5KW
Country of Manufacture China

Directions

Similar products from Electrical Phasemeters & Phase Converters

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies