+ Post new Ad
VINTAGE RARE BARSON HAMMER DRIFT FOR MORSE TAPER DRILLS, US $75.75 – Picture 0
VINTAGE RARE BARSON HAMMER DRIFT FOR MORSE TAPER DRILLS, US $75.75 – Picture 1
VINTAGE RARE BARSON HAMMER DRIFT FOR MORSE TAPER DRILLS, US $75.75 – Picture 2
VINTAGE RARE BARSON HAMMER DRIFT FOR MORSE TAPER DRILLS, US $75.75 – Picture 0
VINTAGE RARE BARSON HAMMER DRIFT FOR MORSE TAPER DRILLS, US $75.75 – Picture 1
VINTAGE RARE BARSON HAMMER DRIFT FOR MORSE TAPER DRILLS, US $75.75 – Picture 2

Vintage Rare Barson Hammer Drift For Morse Taper Drills

US $75.75

  • default, KLAIPEDA, Lithuania
  • Jan 30th
Open on mobile:
QR code
A very very rare Barson ejecting drift here which displaces the customary hammer and loose drift. It is better than both of these because whereas the hammer and loose drift necessitates both hands,the Barson hammer is operated with one hand leaving the other free to remove the drill or sleeve without injury, in addition the spring loaded drift permits a higher shock load to the sleeve or tang of the drill. Size is 14 3/4 inches overall, body is made from brass / bronze, drift is steel. Marked on the body "BARSON HAMMER-DRIFT".
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Good condition.”

Directions

Similar products from Drill Bits with Tapered Shanks

3 MORSE TAPER SHANK 57/64" x 10 3/4" DRILL BIT lathe mill mt tool VERMONT USA

3 MORSE TAPER SHANK 57/64" x 10 3/4" DRILL BIT lathe mill mt tool VERMONT USA

  • Milroy, Indiana, United States
  • Jan 30th
New 1pcs Lathe Mill Center Drill 1.0 mm Bit Drills M2 A-type Set Tooling

New 1pcs Lathe Mill Center Drill 1.0 mm Bit Drills M2 A-type Set Tooling

  • CN, China
  • Jan 30th
CLEVELAND RED SHIELD 5/8" HIGH SPEED G14F STANDARD TAPER SHANK DRILL BIT

CLEVELAND RED SHIELD 5/8" HIGH SPEED G14F STANDARD TAPER SHANK DRILL BIT

  • Linden, Michigan, United States
  • Jan 30th
16.5 mm Twist Drill Bit #2 Morse taper 9" OAL

16.5 mm Twist Drill Bit #2 Morse taper 9" OAL

  • Punta Gorda, Florida, United States
  • Jan 30th
Lot 1 pcs HSS Fully Ground Morse Taper Shank Twist Drills Dia 18mm(.7087") Drill

Lot 1 pcs HSS Fully Ground Morse Taper Shank Twist Drills Dia 18mm(.7087") Drill

  • CN, China
  • Jan 30th
6" WOOD MORTISE MARKING GAUGE Rosewood Brass Double pin

6" WOOD MORTISE MARKING GAUGE Rosewood Brass Double pin

  • Olean, New York, United States
  • Jan 30th
CLE-FORGE 11/16 HIGH SPEED DRILL 7.5" MADE IN USA 400174 excellent condition

CLE-FORGE 11/16 HIGH SPEED DRILL 7.5" MADE IN USA 400174 excellent condition

  • Sacramento, California, United States
  • Jan 30th
Lot 1 pcs HSS Fully Ground Morse Taper Shank Twist Drills Dia 20mm(.7874") Drill

Lot 1 pcs HSS Fully Ground Morse Taper Shank Twist Drills Dia 20mm(.7874") Drill

  • CN, China
  • Jan 30th
Taper shank Drill 1 15/64 " Morse' made in USA 13" overall

Taper shank Drill 1 15/64 " Morse' made in USA 13" overall

  • Coventry, Rhode Island, United States
  • Jan 30th
"C-L" 7/8" Twist Drill Bit 5-3/4" Overall

"C-L" 7/8" Twist Drill Bit 5-3/4" Overall

  • Coventry, Rhode Island, United States
  • Jan 30th
National 1-39/64" Drill Bit 5MT Made in usa 17 inches long

National 1-39/64" Drill Bit 5MT Made in usa 17 inches long

  • Batavia, Ohio, United States
  • Jan 30th
LIGHTLY USED NT TOOL AUTO-SHANK #1MT ADJUSTABLE DRILL SOCKET ADAPTER (D16-1)

LIGHTLY USED NT TOOL AUTO-SHANK #1MT ADJUSTABLE DRILL SOCKET ADAPTER (D16-1)

  • Fairfield, Iowa, United States
  • Jan 30th
Taper Shank Extra Long Drill Bit, 1 25/64", #4MT, HSS

Taper Shank Extra Long Drill Bit, 1 25/64", #4MT, HSS

  • Chillicothe, Missouri, United States
  • Jan 30th
Taper Shank Extra Long Drill Bit, 1 1/4", #4MT, HSS

Taper Shank Extra Long Drill Bit, 1 1/4", #4MT, HSS

  • Chillicothe, Missouri, United States
  • Jan 30th
Taper Shank Extra Long Drill Bit, 1 1/8", #4MT, HSS

Taper Shank Extra Long Drill Bit, 1 1/8", #4MT, HSS

  • Chillicothe, Missouri, United States
  • Jan 30th
Michigan Drill, 297-15/16", 3MT, HSS, Extra Length, Oil Hole Drill Bit

Michigan Drill, 297-15/16", 3MT, HSS, Extra Length, Oil Hole Drill Bit

  • Chillicothe, Missouri, United States
  • Jan 30th
Kobelco 1 47/64" #4 Morse Taper Drill Bit HSS USED

Kobelco 1 47/64" #4 Morse Taper Drill Bit HSS USED

  • Chillicothe, Missouri, United States
  • Jan 30th
Michigan Drill 522 49/64", #2MT, 4 Flute, HSS, Taper Shank Core Drill

Michigan Drill 522 49/64", #2MT, 4 Flute, HSS, Taper Shank Core Drill

  • Chillicothe, Missouri, United States
  • Jan 30th
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015

HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015

  • Lincolnton, North Carolina, United States
  • Jan 30th
CLEVELAND HS Chipbreaker Drills 940C 11/16" Inch Taper Shank 403923 FREE SHIPPIN

CLEVELAND HS Chipbreaker Drills 940C 11/16" Inch Taper Shank 403923 FREE SHIPPIN

  • Lincolnton, North Carolina, United States
  • Jan 30th

People who viewed this item also vieved

29/64" COBALT TAPER LENGTH DRILL, 4-3/4" LOF, 7-1/2" OAL, PTD M51CO (PACK OF 6)

29/64" COBALT TAPER LENGTH DRILL, 4-3/4" LOF, 7-1/2" OAL, PTD M51CO (PACK OF 6)

  • Glendale, Arizona, United States
  • May 27th
15/32" COBALT TAPER LENGTH DRILL, 4-3/4" LOF, 7-1/2" OAL, PTD M51CO (PACK OF 6)

15/32" COBALT TAPER LENGTH DRILL, 4-3/4" LOF, 7-1/2" OAL, PTD M51CO (PACK OF 6)

  • Glendale, Arizona, United States
  • May 27th
45/64" COBALT TAPER LENGTH DRILL, 5-5/8" LOF, 9-1/2" OAL, PTD M51CO 51345

45/64" COBALT TAPER LENGTH DRILL, 5-5/8" LOF, 9-1/2" OAL, PTD M51CO 51345

  • Glendale, Arizona, United States
  • May 27th
DURAPOINT SOLID CARBIDE DRILL SIZE .3125

DURAPOINT SOLID CARBIDE DRILL SIZE .3125

  • South El Monte, California, United States
  • May 27th
DURAPOINT SOLID CARBIDE DRILL SIZE .3750

DURAPOINT SOLID CARBIDE DRILL SIZE .3750

  • South El Monte, California, United States
  • May 27th
DURAPOINT SOLID CARBIDE DRILL SIZE .2450

DURAPOINT SOLID CARBIDE DRILL SIZE .2450

  • South El Monte, California, United States
  • May 27th
Slugger Cutter with Pilot, 18mm x 3/4" Shank, 2.5" Depth

Slugger Cutter with Pilot, 18mm x 3/4" Shank, 2.5" Depth

  • Las Vegas, Nevada, United States
  • May 31st
Century 11/16" S&D Drill Bit 1/2" Reduced Shank For Hard & Soft Metal Or Wood

Century 11/16" S&D Drill Bit 1/2" Reduced Shank For Hard & Soft Metal Or Wood

  • California, United States
  • May 31st
Rare 9.4mm Drill Bit Straight Shank Twist Drill 50135500 9.4 mm Cutting Round

Rare 9.4mm Drill Bit Straight Shank Twist Drill 50135500 9.4 mm Cutting Round

  • Lenexa, Kansas, United States
  • May 31st
DFS1469R3SSF125 KENNAMETAL Indexable Drill 1.469" DIA

DFS1469R3SSF125 KENNAMETAL Indexable Drill 1.469" DIA

  • Windsor, Connecticut, United States
  • May 31st
Vardex Solid Carbide Thread Mill HC37362L08-120UNFTMVTH UNF 7/16"-20-2xDo

Vardex Solid Carbide Thread Mill HC37362L08-120UNFTMVTH UNF 7/16"-20-2xDo

  • Johnson City, New York, United States
  • May 31st
Sandvik 880-D1400L20-03 Indexable Drill Body Kit 20 mm BRAND NEW RETAIL PACKAGNG

Sandvik 880-D1400L20-03 Indexable Drill Body Kit 20 mm BRAND NEW RETAIL PACKAGNG

  • Hagerstown, Maryland, United States
  • May 31st
KENNAMETAL METCUT 270-0200 CARBIDE INSERT THRU COOLANT DRILL 2" cutting dia

KENNAMETAL METCUT 270-0200 CARBIDE INSERT THRU COOLANT DRILL 2" cutting dia

  • Milroy, Indiana, United States
  • May 31st
LOT OF 3 V-HSS TiN NEW SIZE V DRILLS 3" FLUTE 5"OAL USA MADE

LOT OF 3 V-HSS TiN NEW SIZE V DRILLS 3" FLUTE 5"OAL USA MADE

  • Cuyahoga Falls, Ohio, United States
  • May 31st
Interstate Screw Machine Length Drill Set 28 Piece 5/64" - 1/2" x 64th HSS 2Z*

Interstate Screw Machine Length Drill Set 28 Piece 5/64" - 1/2" x 64th HSS 2Z*

  • Saint Louis, Missouri, United States
  • Jun 1st
Size: 10 (.1935") Carbide Tipped Jobber Length Drill

Size: 10 (.1935") Carbide Tipped Jobber Length Drill

  • South Hackensack, New Jersey, United States
  • Jun 1st
Size: 9 (.1960") Carbide Tipped Jobber Length Drill

Size: 9 (.1960") Carbide Tipped Jobber Length Drill

  • South Hackensack, New Jersey, United States
  • Jun 1st
Size: 8 (.1990") Carbide Tipped Jobber Length Drill

Size: 8 (.1990") Carbide Tipped Jobber Length Drill

  • South Hackensack, New Jersey, United States
  • Jun 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies