washer head screw for sale, brand-new and used.

These screws are used to screw light guage steel, galvanized or aluminum roofing panels (24ga - 18ga) to a structural purlin. They are made from case hardened heat-treated steel and have a zinc coating. They are a #12 screw, 1" long, cupped head, have a self sealing washer, have a self drilling point and use a 5/16" standard screw bit.

These screws are used to screw light guage steel, galvanized or aluminum roofing panels (24ga - 18ga) to a structural purlin. They are made from case hardened steel. They are a #12 screw, 1 1/4" long, (appx 1" of thread) have a self sealing washer, have a self drilling point and use a 3/8" standard screw bit.

90 pc M2.5 Screws, Nuts and Washers SetPhillips Pan head screws 35pc (5pc each): M2.5x4, M2.5x6, M2.5x8, M2.5x10, M2.5x12, M2.5x16, M2.5x20M2.5 nut 25pcM2.5 flat washer 25pcM2.5 lock washer 5pc Parts are nickel coated. Also see our M2 and M3 screw sets

#12-24 x 1-1/4 HEX WASHER HEAD SELF DRILLING SCREW CLIMASEAL PLATED TEKS - BAG OF 100. These self drilling double fluted point has precise cutting edges to improve drill performance in 1/4" thru 1/2" steel. These

TEKHW14112 L.H. Dottie Hex Wash Head Self Drilling Screw; 14x1-1/2" Box (50 ct.) Condition New Unopened Never Used In Original Packaging

TEKHW142 L.H. Dottie Hex Wash Head Self Drilling Screw; #14x2" Box (50 ct.) Condition New Unopened Never Used In Original Packaging

1491H2B.58 New #12 x 1" Stainless Steel Self Drilling Screws with Bonded EPDM Rubber and SS Washers, Part Number 799114. Each bid quantity is for a Lot of Fifty (50) Pieces. You may bid / buy any number of lots, up to the total quantity available above.

Lot of (800) slotted / indented hex washer head self-threading sheet metal screws. These zinc plated screws are size #10 and are 1" in length with a 5/16" hex. The type A screw is designed for use in sheet metal from .015 to .050" thick with pre-drilled or punched holes as well as some plastics, impregnated plywood, and other materials.

Lot of (1200) slotted / indented hex washer head self-threading sheet metal screws. These zinc plated screws are size #8 and are 1" in length with a 1/4" hex. The type A screw is designed for use in sheet metal from .015 to .050" thick with pre-drilled or punched holes as well as some plastics, impregnated plywood, and other materials.

Lot of (2000) slotted / indented hex washer head self-threading sheet metal screws. These zinc plated screws are size #6 and are 3/4" in length with a 1/4" hex. The type A screw is designed for use in sheet metal from .015 to .050" thick with pre-drilled or punched holes as well as some plastics, impregnated plywood, and other materials.

Original Authentic Clarke Edger Paper Screw/Washer assembly for the Clarke Super 7 edger. Unlike the inferior aftermarket paper clamp assembly, this original OEM part has a thinner, beveled-head screw and cone-shaped washer so there is no risk of scraping and marring your freshly sanded hardwood. Welcome to Brosson Floor Finishing Solutions!

1000pcs #4-40 x 5/32" Round Head Slotted Machine Screw with Star Lock Washer (More pictures at bottom of page)

#8 x 1 1/2" Indented Hex washer head Self Drilling Screw Zinc Plated- 1000 pcs #8 Metal to metal fastening, used in light gauge framing. Used by metal framing & HVAC contractors/fabricators. Hex Head Diameter- 1/4" Length measured under the head 1 1/2" Drill point- #2 Material thickness- .035- .100 Unit price- .04/pc