washer screw for sale, brand-new and used.

70 pc Metric M1.6 Screw, Nuts and Washer Set Screws: Philips pan head, steel with nickel coating M1.6 4mm, 6mm, 8mm, 10mm, 12mm, 16mm, 5pc each Nuts: M1.6x0.35 steel nuts with nickel coating 20pc Washers: M1.6 stainless steel washer&n

Sheet metal screws Length = 1 inch Neoprene/rubber washer in recessed groove Head embossed with "J" Approximately 270 screws

2524XF2C.16 New Irwin Hex Washer Head #4-40 x 7/16" Yellow Zinc Chromate Machine Screws With Captive External Tooth Star Lock Washer, Part Number MUWE-0407-YY. Each bid quantity is for a Lot of One Hundred (100) Screws. You may bid / buy any number of lots, up to the total quantity available above.

100 HEX SELF TAPPING SCREWS # 14 X 1 washer 3/8" head THIS SALE IS FOR A lot of 100 HEX SELF TAPPING SCREWS # 14 X 1 washer 3/8" head . IDEAL SCREWS TO WORK WITH METAL. THEY WORK WITH NUT DRIVER 3/8" SIZE WASHER HEAD FOR EASY INSTALLATION , CENTERS SCREW WHEN USING A DRILL WITH NUT DRIVER.

Product Description This split lock washer provides a circular bearing surface with offset split ends which help bite into the mating material to provide a locking feature when tightened beneath a nut. It is round with a hole in the center and can be used where loosening from corrosion or vibration is a concern. Lock washers are commonly used in any application using a bolt where 2 pieces are being drawn together.

var itemNumber = window.ebayItemID ?

The Lotoons Store NEW Internal Tooth Lock Washer Steel Zinc Finish 5/16" Bolt Size 0.3260" ID 0.6020" OD 0.0310" Thick Pack Of 100

Screws are #7 x 1-1/4" washer head, square drive. They are zinc coated and hardened to prevent twist-off. Type 17 point for easy installation in hard or soft wood.

Simpson Strong-Tie S/DTT2Z Deck Tension Tie for Steel w/ Washer Simpson Strong-Tie S/DTT2Z Deck Tension Tie for Steel w/ Washer The S/DTT2Z is a cost-effective tension-tie solution suitable for light-duty holdown applications for cold-formed steel (CFS) stud shearwalls. It is fastened to the stud with standard #14 self-drilling screws and depending on the application, can be secured to the foundation using a variety of Simps

Draft Beer Line Cleaning Attachment For a more thorough beer tap cleaning, use this attachment to connect your keg cleaning equipment to your system. When it's time to flush your lines, simply screw this male threaded plated brass fitting onto the female faucet attachment on yo

Sold individually. Add to Cart for multiples. Zip lock bag contains the order stapled to receipt.

(25) VERSATILE RING LUG TERMINAL CONNECTORS #8/M4 SCREWS/BOLTS/STUDS,18 GA WIRE,JOINTING SLEEVE RARE INTERNAL TOOTH LOCK WASHER RINGS Strip Connectors - You Cut Lugs In Various Lengths as You Need New old stock (NOS). Rare, versatile Internal Tooth Lockwasher Ring Lug Crimp/Solder Terminal Connectors. Ring lugs are non-insulated bare open-sleeve (jointing sleeve).

Misc new and used Mi T M pressure washer parts Mfr / Make Part Description Part # Qty Mi-T-M

Specs Washer Assortments; Type: Fender; System of Measurement: Inch; Material: Steel; Minimum Screw Size (Inch): 5/16; Maximum Screw Size (Inch): 1/2; Number of Pieces: 255 Type Fender System of Measurement Inch Material Steel Minimum Screw Size (Inch) 5/16 Maximum Screw Size (Inch)

FOR YOUR CONSIDERATION WE HAVE 32 GOLD ZINC PHILLIPS HEX HEAD SEMS SCREWS WITH WIDE WASHER. THIS IS NEW OLD STOCK FROM SURPLUS, SEE PICTURE FOR SPECS.

Lot of 5 Thermalloy Heatsink Mounting Kits for TO-220 devices. Each bag contains a Thermal film Insulator, Shoulder Washer, Flat Washer, Lock washer, Hex Nut and a Phillips Long Pan Head Screw. Images do a good job of representing the lot.