Weather & Acoustic Insulation (Building Supplies) for sale, page 149

Concord, Ontario, Canada
Jan 30th

Product DescriptionSMA attenuators are used to reduce the input power, and therefore enable RF Explorer to measure stronger signals. It is also used to protect the input SMA port of RF Explorer when unknown strong signals may be in the environment, so you can use this attenuator on demand. You can easily unplug the attenuator when measurement is for weak signals.

Sma termination - 50ohm

Thornhill, Ontario, Canada
Jan 30th

- Weight: 3 grams - Easy maintenance - Impedance (Nominal): 50? By utilizing an SMA termination, you can provide essential protection to your RF Explorer and ensure its peak performance. For example, when passing through airport X-ray scanners with your RF Explorer, remove the SMA antenna and plug in a 50ohm SMA termination for protection.

Hng80 shielding from rf and low frequency electrical fields 20ft length / 2.16ft

Thornhill, Ontario, Canada
Jan 30th

Product Description HNG80 is a compact woven, metalized polyester netting for the protection against high-frequency radiation (HF) and low-frequency electric fields (LF).

Yshield grounding exterior set esa

Thornhill, Ontario, Canada
Jan 30th

Product Details Grounding set for shielding paints in the exterior. To achieve the maximum effectiveness from shielding paint, it is strongly recommended to have two grounding sets per each connected area. YShield Grounding Exterior set ESA Features:

Power limiter for rf explorer

Concord, Ontario, Canada
Jan 30th

Production DescriptionThe Power Limiter for RF Explorer Meters is a custom device designed from scratch to be the perfect protection against strong RF fields. All RF Explorer models have some power ranges for input signal beyond which can be damaged. For most models, the limit is on +5dBm, some others are ok up to +10dBm but only WSUB3G (as well as the RF SMA connector on the right side in a 3G Combo) is protected up to +30dBm.

Sma male/female adapter

Concord, Ontario, Canada
Jan 30th

Product DescriptionIt's a fact, all RF connectors do wear with use. The RF Explorer SMA ports are subject to minimal wear each time the connector interface is coupled and de-coupled with an antenna, a SMA cable, an attenuator or a RF device of any kind. If you repeat plug/unplug operations over the RF Explorer SMA port hundreds of times, the SMA port may underperform over time and exhibit undesired attenuation.

Grounding set esw

Thornhill, Ontario, Canada
Jan 30th

Grounding set for shielding paints, nettings, fleeces, etc. in the interior. For each continuous connected area (or per room), one grounding set is required!

Silver buddy

Concord, Ontario, Canada
Jan 30th

Features: This pure silver cloth is anti-bacterial and disinfects whatever it touches! We touch so many germy surfaces a day, our cellphones, keyboards, public transit areas, shopping carts, doorknobs and so much more; wouldn’t it be nice to disinfect your hands quickly without messy hand sanitizer or soap and water? The Silver Buddy is always there for you to make you feel fresh and safe.

Nsf34 - low frequency electrical fields shielding paint 5l

Thornhill, Ontario, Canada
Jan 30th

YSHIELD NSF-34 EMF SHIELDING PAINT Product Details NSF34 is low frequency electric fields shielding paint. This paint is highly breathable with very low VOC levels and freeof solvents. The paint is manufactured in Germany by YShield and is regularly tested at the University of the German Armed Federal Armed Forces.

Grounding mcl

Thornhill, Ontario, Canada
Jan 30th

This durable Grounding kit is designed to be used in conjunction with our magnetic shield foil MCL61. It is a necessary set to SAFELY conduct the electricity out.

Emf shielding fabric naturell - 6.5 ft.

Thornhill, Ontario, Canada
Jan 30th

Product Information: Naturell, a semi-transparent fabric, is made for protection against high-frequency (HF) radiation. Its typical application is as a curtain. It is a proven, efficient solution against electromagnetic fields, high frequency (HF) and microwave radiation.

Grounding set esv

Thornhill, Ontario, Canada
Jan 30th

Product Description The Grounding Set ESV is a universal set for loosely laid nettings, fleeces and in many other settings. Many other of our grounding components and other products can be directly connected with each other via our grounding cables EK. The Grounding set has a very stable sockets, stiff closing and press studs used normally for boat-building.

Rf explorer holder

Concord, Ontario, Canada
Jan 30th

Production DescriptionThis high quality and sturdy holder and stand for your RF Explorer is made of robust laser cut blue acrylic, and has provisioned room for USB cable to connect to a PC. The USB cable can be connected from behind the holder or any of the two lateral large holes on each side. It is applicable for bulky USB cables with ferrite beads.

50cm length - sma male to sma male plug pigtail cable rg316

Concord, Ontario, Canada
Jan 30th

Product DescriptionRF cables are required when connecting RF Explorer to other instruments or devices. This 50cm cable is good for any frequency up to 3GHz, and can fit RF Explorer with any external SMA-female device or antenna.

Rfemwsub1g module

Concord, Ontario, Canada
Jan 30th

Product DescriptionRFEMWSUB1G is an Expansion Module for RF Explorer. It can be plugged in your RF Explorer unit to extend the coverage to 240-960Mhz frequency band. It is attached internally to the RF Explorer main board and displays a second antenna connector to cover the new band.

Swiss shield wear - emf shielding fabric - fabric length 5ft, width 4.9ft.

Thornhill, Ontario, Canada
Jan 30th

Product Information: Perfect for even sensitive skin, WEAR fabric dense cotton fabric for shielding high-frequency electromagnetic radiation. This fabric is made of high grade textiles and has been certified and tested in German laboratories. It feels pleasant and breathable on your skin and can be washed, ironed and processed.

Rf adapter rp-sma jack to sma plug straight-long version

Concord, Ontario, Canada
Jan 30th

Product DescriptionSome WiFi antennas and cables are designed for RP-SMA (reverse polarity SMA) and cannot be connected to a standard SMA plug. RP-SMA is a variation of the SMA connector specification which reverses the gender of the interface. The reason for that was a decision made by FCC in order to prevent end-users from manipulating certified WiFi devices at home, using other available SMA antennas.

Sma-n adapter sma plug to n jack straight

Concord, Ontario, Canada
Jan 30th

Product DescriptionMost laboratory grade RF bench size instruments use N connector size cables. This N-female to SMA-male connector will easily interface your RF Explorer to any other bench size instrument or cable.

Sma adapter sma plug to sma jack right angle

Concord, Ontario, Canada
Jan 30th

Product DescriptionThis RF connector is ideal to use a RF Explorer deployed horizontally, with any antenna connected onto it. For instance when you are on the road and you don't have a RF Explorer Stand, you can still easily fit the USB cable, the antenna and connect to a computer with easy. It is also useful to create a more reliable ground-effect for the antenna if fit the RF Explorer over a metallic structure such as a car.

Hnv80 fleece for rf and low frequency electrical fields 20ft length / 3.28ft

Thornhill, Ontario, Canada
Jan 30th

Product Description This shielding fabric is used for protection against high-frequency radiation (HF) and low-frequency electric fields (LF). This environmentally friendly product is typically used for ministries of defense, banking houses, laboratories and other professional environments. Usual application in the interior should be loosely laid or used for stapling in drywall constructions.