weldon 40 for sale, brand-new and used.

Up for sale is a Weldon 1 1/4" SAR 40-8 K4 snub nose milling arbor. Item is in good usable condition.

NEW IPS Weld-On 10162 721 PVC Cement, Blue - 1 Pint

YG-1 E2053 Cobalt Steel Square Nose End Mill, Double End, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.375" Overall Length, 0.265625" Cutting Diameter, 0.375" Shank Diameter Features Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life Four flutes produce a better finish than fewer flutes

Niagara Cutter 40101 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2.5" Overall Length, 0.313" Cutting Diameter, 0.375" Shank Diameter Features Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish High-speed steel is compatible with a var

NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 nose 1.873" diameter, 2.644" long projection flange 0.375" thick with .639" wide slots, diameter 2.39" Overall length 6.3" Shipping: Winner pays actual shipping cost. There is NO

NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 nose 1.855" diameter, 2.644" long projection flange 0.375" thick with .639" wide slots, diameter 2.42" Overall length 6.3" Shipping: Winner pays actual shipping cost. There is NO

NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 0.625" end mill holder Weldon type shanks 1.634" nose diameter, 2.23" long from the bottom of the flange Overall length 5.97" Overall diameter 2.45" collar 0.37" thick with two 5/8" wide cut outs. Shipping: Winner pays actual shipping cost. There is

Used BIG CAT 40 tool holder with coolant inducer. Holds 1.250" Weldon shank tools. Has minor surface rust, spins free.

You are bidding on a used HPI Pioneer CAT40 3/8" End Mill Holder design for standard CAT40 spindles. This tool accepts 3/8" Weldon End Mills. This tool is dynamically balanced for 10,000 RPM.

NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 0.5" end mill holder Weldon type shanks 1.382" nose diameter, 2.25" long from the bottom of the flange Overall length 6.15" Overall diameter 2.38" two 0.639" wide flange cut outs. Shipping: Winner pays actual shipping cost. There is

NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 3/16" end mill holder Weldon type shanks 0.812" nose diameter, 1.32" long from the bottom of the flange Overall length 5.1" Overall diameter 2.38" two 0.633" wide cut outs. Shipping: Winner pays actual shipping cost. There is

NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 1.00" end mill holder Weldon type shanks 2.12" nose diameter, 4" long from the bottom of the flange Overall length 7.7" Overall diameter 2.376" two 0.639" wide cut outs. Shipping: Winner pays actual shipping cost. There is

NMTB 40 Taper mount Big diameter 1.75" small .985" Taper length 2.8" drawbar thread 5/8-11 0.875" end mill holder Weldon type shanks 2.109" nose diameter, 2.75" long from the bottom of the flange Overall length 6.5" Overall diameter 2.44" no flange, two 0.639" wide cut outs. Shipping: Winner pays actual shipping cost. There is

Niagara Cutter N33884 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 37 Degree Helix, 3 Flutes, 4.5" Overall Length, 0.750" Cutting Diameter, 0.750" Shank Diameter Features 37-degree helix provides efficient chip evacuation required to machine aluminum and other nonferrous materials Three flutes provide a finer finish than two flute

FITZ-RITE CAT 40 1/2 ENDMILL HOLDER 4.72" PROJECTION 40E-.50- 4.72 Used FITZ-RITE cat40 toolholderCAT 40 WELDON STYLE END MILL HOLDER40E-.50- 4.721/2"Dia x 4.72 Projectionitem #74 We may have multiple quantities of this item listedThe auction is for one (1) onlyCheck our store for other Cat 40 toolholders We can offer disco

RICHMILL Cat40 x 3/4 toolholder 40CT-SL 3/4 - 3.50 3.5" Projection Used Richmill cat40 toolholderCAT 40 WELDON STYLE END MILL HOLDERRICHMILL Cat40 x 3/4 toolholder 40CT-SL 3/4 - 3.50 3.5" Projection item #73 We may have multiple quantities of this item listedThe auction is for one (1) onlyCheck our store for other Cat 40 toolholders We can offer discoun

RICHMILL Cat40 x 3/16 toolholder 40CT-SL 3/16 -4.00 4" Projection Used Richmill cat40 toolholderCAT 40 WELDON STYLE END MILL HOLDER40CT-SL 3/16 -4.00 3/16"Dia x 4" Projectionitem #72 We may have multiple quantities of this item listedThe auction is for one (1) onlyCheck our store for other Cat 40 toolholders

RICHMILL Cat40 x 1/4 toolholder 40CT-SL1/4-4.00 4" Projection Used Richmill cat40 toolholderCAT 40 WELDON STYLE END MILL HOLDER40CT-SL1/4-4.00 1/4"Dia x 4" Projectionitem #71 We may have multiple quantities of this item listedThe auction is for one (1) onlyCheck our store for other Cat 40 toolholders We can offer discounts f

RICHMILL Cat40 x 1/2 toolholder 40CT-SL1/2-4.00 4" Projection Used Richmill cat40 toolholderCAT 40 WELDON STYLE END MILL HOLDER40CT-SL1/2-4.00 1/2"Dia x 4" Projectionitem #70 We may have multiple quantities of this item listedThe auction is for one (1) onlyCheck our store for other Cat 40 toolholders We can offer discounts f