+ Post new Ad
Weldon Endmills KA16-3, US $40.00 – Picture 0
Weldon Endmills KA16-3, US $40.00 – Picture 0

Weldon Endmills Ka16-3

US $40.00

  • Aumsville, Oregon, United States
  • Jan 30th
Open on mobile:
QR code
I have eight packages with five of these of these KA16-3 end mills in each package up for this sale.  These are all new and in original factory packaging.    They are 1/2" diameter, high speed steel, un-coated, right hand cut, length of cut 1.250",  4 flute, shank diameter .500 (1/2")....   These end mills sell regularly for $29 to $30 each so a bundle of them would thusly run $145 to $150 for 5 pieces.   I am offering them at less than  1/2 price at $45.00 for 5 Pieces including shipping.     A great buy so don't wait or they will be gone.... 
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture United States
Model KA16-3
Brand Weldon
Manufacturer Weldon

Directions

Similar products from Other Tool Retention Items

Rotary Coolant Adapter

Rotary Coolant Adapter

  • Glasgow, Kentucky, United States
  • Jan 30th
NIKKEN NMTB50-NPU13-86 END MILL HOLDER MILLING DRILL MACHINERY ENGINEERING #39

NIKKEN NMTB50-NPU13-86 END MILL HOLDER MILLING DRILL MACHINERY ENGINEERING #39

  • Tonawanda, New York, United States
  • Jan 30th
LOT OF 2 CAT 50 END MILL ADAPTERS MILLING MACHINERY ENGINEERING #41

LOT OF 2 CAT 50 END MILL ADAPTERS MILLING MACHINERY ENGINEERING #41

  • Tonawanda, New York, United States
  • Jan 30th
KENNAMETAL NMTB50 SINGLE ANGLE COLLET CHUCK MILL MILLING ENGINEERING #42

KENNAMETAL NMTB50 SINGLE ANGLE COLLET CHUCK MILL MILLING ENGINEERING #42

  • Tonawanda, New York, United States
  • Jan 30th
USED 2004 DAEWOO LYN(2 PCS) LATHE TOOL BLOCK HOLD 1.0" SQUARE SHANK TURNING TOOL

USED 2004 DAEWOO LYN(2 PCS) LATHE TOOL BLOCK HOLD 1.0" SQUARE SHANK TURNING TOOL

  • Ontario, California, United States
  • Jan 30th
USED 2004 DAEWOO LYNX COOLANT BLOCK HOLD

USED 2004 DAEWOO LYNX COOLANT BLOCK HOLD

  • Ontario, California, United States
  • Jan 30th
Erickson Tool 1.5" Diameter Cat40 Holder

Erickson Tool 1.5" Diameter Cat40 Holder

  • Dubuque, Iowa, United States
  • Jan 30th
1/4 INCH X 25 FOOT YELLOW AIR RECOIL HOSE

1/4 INCH X 25 FOOT YELLOW AIR RECOIL HOSE

  • Chino, California, United States
  • Jan 30th
Milwaukee Arbor Hole Saw Shank 49-56-7000 New

Milwaukee Arbor Hole Saw Shank 49-56-7000 New

  • Mantua, Ohio, United States
  • Jan 30th
TAWSN0110 Mitsubishi TAW INDEXABLE DRILL

TAWSN0110 Mitsubishi TAW INDEXABLE DRILL

  • North Little Rock, Arkansas, United States
  • Jan 30th
cnc tool post for haas or okuma. may fit others.

cnc tool post for haas or okuma. may fit others.

  • Hopkins, Minnesota, United States
  • Jan 30th
Cnc Lathe Tool Post. Haas Or Okuma

Cnc Lathe Tool Post. Haas Or Okuma

  • Hopkins, Minnesota, United States
  • Jan 30th
Floor Crane Lifter Heavy Duty Vestil Mobile Wheel

Floor Crane Lifter Heavy Duty Vestil Mobile Wheel

  • Scarborough, Ontario, Canada
  • Jan 30th
Vertical Barrel Drum Lifter Chain Sling Tool

Vertical Barrel Drum Lifter Chain Sling Tool

  • Scarborough, Ontario, Canada
  • Jan 30th
Wire Cable Spool Reel Rolling Cart Rack Layer Tool

Wire Cable Spool Reel Rolling Cart Rack Layer Tool

  • Scarborough, Ontario, Canada
  • Jan 30th
HITACHI SEIKI V40M-Z VDI 40 DRIVEN TOOLHOLDER, NEW

HITACHI SEIKI V40M-Z VDI 40 DRIVEN TOOLHOLDER, NEW

  • West Babylon, New York, United States
  • Jan 30th
MACHINIST MILL LATHE Brown & Sharpe #20D Knurling Tool - 3/4" Shank

MACHINIST MILL LATHE Brown & Sharpe #20D Knurling Tool - 3/4" Shank

  • Morris Plains, New Jersey, United States
  • Jan 30th
Mapal 30118991 (52901/62279) diameter 37.6 - AD6

Mapal 30118991 (52901/62279) diameter 37.6 - AD6

  • Bloomfield, Connecticut, United States
  • Jan 30th
Centaur RDF 100 Acura-Flex Collet, 15/64"

Centaur RDF 100 Acura-Flex Collet, 15/64"

  • Abingdon, Maryland, United States
  • Jan 30th
Centaur RDF 100 Acura-Flex Collet, 7/32"

Centaur RDF 100 Acura-Flex Collet, 7/32"

  • Abingdon, Maryland, United States
  • Jan 30th

People who viewed this item also vieved

KENNAMETAL CAT50 WITH TG75 COLLET HOLDER

KENNAMETAL CAT50 WITH TG75 COLLET HOLDER

  • High Point, North Carolina, United States
  • Mar 12th
RICHMILL 1/2" & PARLEC 1" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

RICHMILL 1/2" & PARLEC 1" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

  • Covina, California, United States
  • Mar 12th
MVTNR 12 3B 25.4mm SANDVIK Boring Bar (1pc) New

MVTNR 12 3B 25.4mm SANDVIK Boring Bar (1pc) New

  • Waterford, Michigan, United States
  • May 3rd
STFCR 08CA-09 10mm SANDVIK Cartridge (1pc) New

STFCR 08CA-09 10mm SANDVIK Cartridge (1pc) New

  • Waterford, Michigan, United States
  • May 3rd
Sandvik Insert, TNMA160408S01020E CB20, Pack of 5 (Item # 2)

Sandvik Insert, TNMA160408S01020E CB20, Pack of 5 (Item # 2)

  • Concord, North Carolina, United States
  • May 20th
Iscar Inserts 11IR 18 NPT IC 908 (2 pcs)

Iscar Inserts 11IR 18 NPT IC 908 (2 pcs)

  • Lockhart, Texas, United States
  • May 21st
T.M. SMITH 1" TAP ADAPTER

T.M. SMITH 1" TAP ADAPTER

  • Cadiz, Kentucky, United States
  • Jun 12th
Sleeve Morse extension 2MT TO 3=1 MT extension sleeve #1 morse to #2 morse taper

Sleeve Morse extension 2MT TO 3=1 MT extension sleeve #1 morse to #2 morse taper

  • Ridgefield, Washington, United States
  • Jun 13th
DMB Tool SF-48-48-3751 Drill Bushing

DMB Tool SF-48-48-3751 Drill Bushing

  • Peoria, Illinois, United States
  • Jun 26th
BANDO Taper Lock Bushing TL2517 X 1-11/16 *NEW IN SEALED BOX*

BANDO Taper Lock Bushing TL2517 X 1-11/16 *NEW IN SEALED BOX*

  • Kansas City, Missouri, United States
  • Jun 27th
Lot of Four BT40 Tool Holders Lyndex Nikken, and Sandvik (Inv.35583)

Lot of Four BT40 Tool Holders Lyndex Nikken, and Sandvik (Inv.35583)

  • Portland, Connecticut, United States
  • May 27th
Richmill CAT 50 CT 50- SL 3/4" -3.75 End Mill Holder

Richmill CAT 50 CT 50- SL 3/4" -3.75 End Mill Holder

  • Garden City, Idaho, United States
  • May 27th
6pc Lot Aircraft Drill Bit Collet #17 #18 #22 #24 #26 #27 3.5mm - 4.5mm 1/4"-28

6pc Lot Aircraft Drill Bit Collet #17 #18 #22 #24 #26 #27 3.5mm - 4.5mm 1/4"-28

  • Romulus, Michigan, United States
  • Jun 7th
Aloris CA-5 CA5 MT3 Morse Taper #3 Quick Change Tool Post Holder

Aloris CA-5 CA5 MT3 Morse Taper #3 Quick Change Tool Post Holder

  • Cornell, Illinois, United States
  • Jun 7th
Ajax Phase ll Quick Change Tool Holder #250-204 Boring Bar

Ajax Phase ll Quick Change Tool Holder #250-204 Boring Bar

  • Salt Lake City, Utah, United States
  • Jun 7th
PDQ Marlin Series M Master Holder & Tooling Quick Change NMTB 50 Milling Machine

PDQ Marlin Series M Master Holder & Tooling Quick Change NMTB 50 Milling Machine

  • Yorktown, Virginia, United States
  • Jun 7th
GENTLY USED BIG LOT OF ASSORTED SUNNEN TRUING SLEEVES S-120 - S-240

GENTLY USED BIG LOT OF ASSORTED SUNNEN TRUING SLEEVES S-120 - S-240

  • Ellington, New York, United States
  • Jun 9th
VERY NICE BIG LOT OF ASSORTED SUNNEN TRUING SLEEVES S-495 - ST-1375

VERY NICE BIG LOT OF ASSORTED SUNNEN TRUING SLEEVES S-495 - ST-1375

  • Ellington, New York, United States
  • Jun 9th
Nema 42 3phase 20N.m 2832ozf.in stepperMotor 110J12220-360

Nema 42 3phase 20N.m 2832ozf.in stepperMotor 110J12220-360

  • DongGuan, China
  • Oct 24th
Nema 42 3phase 16N.m 2266ozf.in stepperMotor 110J12185-360

Nema 42 3phase 16N.m 2266ozf.in stepperMotor 110J12185-360

  • DongGuan, China
  • Oct 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies