wheel 1-5 for sale, brand-new and used.

Listed is a Lot of 5, NEW, Norton 4" X .042"X1/2" Reinforced Cut-Off Wheels Toolroom reinforced cut-off wheel is the better choice for cutting tool steel on fixed-based machines when work is not securely clamped. Wheel Diameter: 4" Wheel Thickness: .042" Hole Size: 1/2" Bond: OBNA2 - side reinforced, resin bond Grit: 60 General Tool & Supply Company of Attleboro, Massachusetts, is one of the Nation's leading stocking, single-location Industrial Supply Stores.

Listed is a Lot of 5, NEW, Norton 4" X .040"X3/4" Reinforced Cut-Off Wheels Toolroom reinforced cut-off wheel is the better choice for cutting tool steel on fixed-based machines when work is not securely clamped. Wheel Diameter: 4" Wheel Thickness: .040"-.042" Hole Size: 3/4 Bond: OBNA2 - side reinforced, resin bond Grit: 60 General Tool & Supply Company of Attleboro, Massachusetts, is one of the Nation's leading stocking, single-location Industrial Supply Stores.

Listed is a never been used, Norton 7"X1/16"X5/8" A46 O8B Non-Reinforced Cutoff Wheel. The listed cutoff wheels are USA made. Non-Reinforced cutoff wheels are designed for use on fixed base machines where the work is securely clamped, guarded , and where the wheel operates on a controlled cutting plane.

Thinner design minimizes the surface area contact between the material and the cut-off wheel for faster, cleaner cuts.The tough aluminum oxide abrasive is continuously exposed during use to maintain an aggressive cutting edge, ensuring smooth, accurate cuts on metal work pieces. Fully reinforced with fiberglass mesh for added safety and controlled performance, these metal cut-off wheels handle a wide range of metal cutting projects. Narrow kerf, just 3/64 in.

Offered to you for your immediate purchase and Free Shipping in the USA One NOS CARBORUNDUM 3259278 BBR 20 x1/8 inch Grinding Wheel 4 mounting holes and 34 other holes in a spiral pattern in it . The center mounting hole is 1 inch diameter the other three are 5/8 inch diameter and are not all equally spread apart 2-1/2 to 2-3/4 I assume sto make sure it doesn't run backwards to the design of the wheel.

Listed is a NEW, Norton#66252900497 7"x1/16"x5/8" 57A46-Q8B cutoff wheel. Diameter: 7" Thickness: 1/16" Hole Size: 5/8" Grit: 46 Bond: B General Tool & Supply Company of Attleboro, Massachusetts, is one of the Nation's leading stocking, single-location Industrial Supply Stores. We specialize in Norton Abrasives, Mitutoyo, Starrett, and Brown&Sharpe precision tools, Kennedy and Gerstner tool boxes, LPS lubricants, cutting tools, hand tools, jewelry supplies, and much more.

12 x 1/8 x 1" Arbor Premium SC Cut-Off Wheels for Masonry, C36S Cut-off wheel for chop saws, stationary saws and high-speed gas powered saws.

Pearl Abrasives12 x 1/8 x 20mm Arbor Silver Line™ AO Hi-Speed Cut-Off Wheels, A30R, Package of 5 Overview: Cut-off wheel for gas powered saws. Aluminum Oxide. Silver Line™.

CUT OFF WHEEL 12" FOR METAL-178121Magna Cut Center Reinforced Cut-Off Wheel for low horsepower chop saws & metal cutting - Color Code Red - 1" Arbor Hole - 5,100 RPM Maximum.

Thinner design minimizes the surface area contact between the material and the cut-off wheel for faster, cleaner cuts.The tough aluminum oxide abrasive is continuously exposed during use to maintain an aggressive cutting edge, ensuring smooth, accurate cuts on metal work pieces. Fully reinforced with fiberglass mesh for added safety and controlled performance, these metal cut-off wheels handle a wide range of metal cutting projects.

The Lotoons Store NEW Makita 724114-A-25 Cut Off Wheel 25-Pack 4-Inch

4" X 1/4" X 5/8" DEPRESSED CENTER A24R METAL / STEEL GRINDING WHEEL 10 Pack STAR ABRASIVES 5/8" Arbor Hole With Metal Plate

Norton Charger Flex Depressed Center Abrasive Wheel, Type 29, Aluminum Oxide, 7/8" Arbor, 5" Diameter x 1/8" Thickness, Grit 36 (Pack of 1) Norton Charger Type 29 Flex depressed center wheels offer better control of finish quality and removal rate, and are commonly used for light stock removal. Reinforced wheels are designed to resist breakage caused by severe cross-bending and are required on any operation where the work is not securely clamped.