Wiha 80 Piece Insulated Rolling Tool Case + Free Knipex Pliers - Made In Germany

US $230

Pompano Beach, Florida, United States
May 26th

Open on mobile:
QR code

............... Wiha 80 Piece Insulated Rolling Tool Case + Free Knipex Pliers MADE IN GERMANY - Brand New 80 Piece Insulated Rolling Tool Case Set includes: Long Nose Pliers: 6.3, 8.0" Bent Nose Pliers: 6.3" Long Flat Nose Pliers: 6.3" Combo Pliers / Crimpers: 9.0" Diagonal Cutters: 6.3" High Leverage Cutters: 8.0" Cable Cutters: 6.3" Stripping Pliers: 6.3" Adjustable Wrench: 8.0" Inch Insulated Sockets: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8" Metric Insulated Sockets: 13.0, 14.0, 15.0, 17.0, 19.0, 20.0, 22.0mm Inch Insulated Nutdrivers: 7/32, 1/4, 5/16, 3/8, 7/16" Metric Insulated Nut Drivers: 5.0, 5.5, 6.0, 7.0, 8.0, 10.0, 13.0mm Insulated Cable Knife: 50mm 2 Meter Ruler Inch / Metric Insulated Ratchet 3/8" Drive Insulated Extension Bar 3/8 x 4.9" Single Pole Voltage Detector Insulated Slotted Drivers: 2.5, 3.0, 3.5, 4.0, 4.5, 5.5, 6.0, 6.5, 8.0, 10.0mm Insulated Phillips Drivers: #0, #1, #2, #3 Insulated Slt/Ph Terminal Drivers: #1, #2 Insulated Square Drivers: #1, #2 Insulated Torx Drivers: T6, T7, T8, T9, T10, T15, T20, T25, T30 Insulated Inch T-handles: 5/32, 3/16, 7/32, 1/4, 5/16, 3/8" Insulated Metric T-handles: 4.0, 5.0, 6.0, 8.0mm Insulated L-Key: 10mm, 1/2" 10,000 Volt tested 1,000 Volt rated Also Included at no additional charge: Knipex 13-88-8 Pliers for Electrical Installation - Insulated Multifunctional pliers for the electrical installation; for cutting cable, stripping and crimping end sleeves (ferrules), to grip flat and round material, for bending, deburring......... 6 functions in one pair of pliers smooth surfaces near the tips grip single conductors without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes stripping holes for 12 + 14 AWG crimp die for end sleeves (ferrules) 12 - 20 AWG cable shears with (induction-hardened) precision cutting edges for copper and aluminum cables up to 19/32" diameter slim dimensions for easy access bolted joint: precise, zero backlash operation of pliers ...... High-grade special tool steel / forged, oil-hardened Specifications & Standards: EN/IEC 60900 ASTM F-1505-01 VDE 0682/part 201 DIN 7437 NFPA70E & CSA Insulated tools are intended to provide protection against accidental contact with charged energized circuits. For maximum safety we recommend de-energizing all circuits whenever possible before starting work on electrical apparatus or conductors. Always visually inspect insulation on tools before use, do not use tools if insulation shows signs of wear or damage to the insulated areas of the tool. Wear appropriate eye protection when using hand tools. Use insulated protective outer wear when appropriate. Guaranteed Wiha Quality Made In Germany ! New Never Used ! ................