wire bushing for sale, brand-new and used.

Used Greenlee 2  inch threaded  bushing extension, good threads.  Ship to 48 states

Ideal Precision Rotary Stripper Model 45-150 Come with the following wire bushing .040 / .045 / .050 / .065 / .070 / .080 / .085 / .090 also extra cutter. Works Great

Clarostat 5K OHM Pots Audio Taper Potentiometer with an ALTERNATING Momentary DPST Switch (2 Pole, 1 Throw) 1 "Buy it Now" is for 2 Pots When the button is pressed, one pole is closed, when released, the other pole closes. Can be wired like a SPST with either NC or NO contacts, or you can wire both poles at the same time (One is open while the other is closed) Specifications: Brand: Clarostat Part: 1320-3027-7 Resistance: 5K OHM Resistance Type: Audio Taper Tolerance:

Clarostat 5K OHM Pot Audio Taper Potentiometer with an ALTERNATING Momentary DPST Switch (2 Pole, 1 Throw) 1 "Buy it Now" is for 1 Pot When the button is pressed, one pole is closed, when released, the other pole closes. Can be wired like a SPST with either NC or NO contacts, or you can wire both poles at the same time (One is open while the other is closed) Specifications: Brand: Clarostat Part: 1320-3027-7 Resistance: 5K OHM Resistance Type: Audio Taper Tolerance: 5

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE) SPECTROL MINIATURE POTENTIOMETER MFGR: SPECTROL (VISHAY/SPECTROL) BUSHING MOUNT MODEL: 162 WIRE WOUND RESISTANCE: 20 OHMS (THIS WOULD BE A SPECIAL ORDER) TOL: 5% res., 0.30% lin. WATTAGE: 2 WATTS TURNS: 10 TURNS

New Clarostat 25K ohm 2 Watt Wire Wound Potentiometer Part number: 543C125K See below for part number decode. Sale is for one (1) new potentiometer. No other parts included in sale.

New Clarostat 1.5K ohm Wire Wound 4 Watt Potentiometer Part number: 58C1 See below for part number decode. Sale is for one (1) new potentiometer. No other parts included in sale.

rfbat

rfbat

[TITLE]

> These are new motors that were removed from a fan assembly.  The motors were coupled to the fan via rubber bushing that was cemented to the shaft, that is what the residue on the shaft is from.  It can be easily removed with a scotch brite pad and a little elbow grease.  The fan assemblies were never used so there is no run time on these motors.  The motors have bearings, not bushings and are of good quality and run for many years trouble free.

Product Description A single pair which serves eight purposes for mig welding Designed for hammering, wire cutting, insulation bushing removal & installation and drawing out wire Ideally suited for the removal of spatter from inside, outside and the nozzle-end Perfect for removal and installation of contact tips