Wire Fishing Systems & Pullers (Tools for Cables & Wires Handling) for sale, page 85

Greenlee 540-8m glo stix / rods with bullet and j hook nose tips, 3/16" x 8'

Little Elm, Texas, United States
Jun 9th

Luminescent fiberglass rods glow in the dark to make fishing voice, data and video wires easier in dark spaces, such as above ceilings, in walls, and below sub-floors More flexible for fishing in walls through outlet box holes Sturdy, steel-threaded connectors are interchangeable with Greenlee 1/4 IN (6.4 mm) Fish Stix Clear, non-metalic storagetube keeps Glo Stix charged and ready to use 200 lbs.

Greenlee 436-10 100 feet x 3/16 inch nylon fish tape -

Kissimmee, Florida, United States
Jun 9th

Up for sale Greenlee[ 436-10 100 Feet X 3/16 Inch Nylon Fish TapeThis item is in good used condition. comes minor scratches stain and names with black ink see pictures sold as/is. .

Gmp apollo cable lasher model 70400 w/case and harness

Madison, Georgia, United States
Jun 9th

This auction is for a GMP Apollo Cable Lasher, Model 70400 (I believe). This unit is in very good condition, clean and well maintained. It is considered the workhorse of the industry and has been very reliable for us.

Ideal 31-066 tuff-grip stainless steel fish tape 120 feet long x 1/8 inch wide

Lawton, Michigan, United States
Jun 9th

Used in good working order

100pcs n type male plug to f female jack rf coaxial adapter connector zinc alloy

Mong Kok, Hong Kong
Jun 9th

5 ton capacity 8 way 2/3 jaw reversible puller

Port Richey, Florida, United States
Jun 9th

Product Name 5 Ton Capacity 8 Way 2/3 Jaw Reversible Puller Features and Benefits: Can be assembled to make a two or three jaw puller when additional stability is needed Reversible jaw design for added versatility and a broader range of pulling capability Maximum reach: 5.5" Maximum spread: 7" This 5 ton capacity 8 way reversible puller, is ideal for pulling gears, bearings, pulleys and other press fit parts. It's made with the quality and durability to last!

50 ft nylon fish tape electrical cable puller electrician exchangeable search

Chesapeake, Virginia, United States
Jun 9th

Product Description Our 50' nylon fish tape is a great cable or wire installation tool. It is constructed of non conductive nylon. This makes pushing and

2.5" dcd expandable puller

Pensacola, Florida, United States
Jun 9th

DCD Expandable Duct Puller Part No. Nominal Duct Size 3:1 Safe Working Load Inside Duct Diameter Decimal Millimeter Weight Min. Max.

Westward 17 in spread 13 ton cap jaw puller

Plainfield, Illinois, United States
Jun 9th

[ Westward 17 In Spread 13 Ton Cap Jaw Puller

10937 bondhus ballpoint tool set 13pc.

Owensboro, Kentucky, United States
Jun 9th

10937 Bondhus Ballpoint Tool Set 13pc. BLx13 ***NIB***

08080925 condux 808 champion swivel 2-1/2" 20000 pound rating greenlee

La Grange, Illinois, United States
Jun 9th

For sale is a 2 1/2"swivel manufactured by Condux International. It has a 20000 lbs. working load for underground applications and a 12000 lbs.

New ideal 31-381 wire pulling lubricant, gel ~ 1 gallon

Andrew, Iowa, United States
Jun 9th

this is new and sealed closed Wire Pulling Lubricant, Polymer Base, Size 1 gal., Container Type Pail, NLGI Grade Not Specified, Color Clear, Temp. Range 30 Degrees to 180 Degrees F, Flash Point Not Specified, Dropping Point Not Specified, Four-Ball Wear Not Specified, Specific Gravity 1.09, Timken OK Load Not Specified, Viscosity @ 40C Not Specified, Viscosity @ 100C Not Specified, Metal Detectable No, Application Wire Pulling, Standards UL Listed ask other questions you have!!

Telsta t-907004f1 deep impact socket 1-1/8", 5/8" nut runner

Crooksville, Ohio, United States
Jun 9th

These Telsta impact bits are used but they are basically indestructible, they show signs of use but they will pretty much outlast any other tool you own. Bits work and operate just like a new one only cheaper.

Klein tools 1604-20l haven cable grip puller for 0.125 - 0.50 cable 5000 lb cap

Spokane, Washington, United States
Jun 9th

Buyer Assurance: We are not a new e

Large gear and pulley puller

Port Richey, Florida, United States
Jun 9th

Product Name Large Gear and Pulley Puller Features and Benefits: The puller will spread from 2" to 7-3/4" Block is 8-1/4" wide, and its forcing screw is 3/4" - 16 x 11-5/8" long Accommodates any cap screws up to 1/2" diameter Using this tool, you can easily remove a wide range of gears, pulleys, or other parts that have tapped holes. Length: 13.2 " Width: 3.1 " Height: 2.2 " Item Weight: 4.35 lbs Seller Terms & Conditions 1.

9 piece manual sleeve puller set

Port Richey, Florida, United States
Jun 9th

Product Name 9 Piece Manual Sleeve Puller Set Features and Benefits: Manually operated, screw-powered device removes cylinder sleeves from most truck, bus and tractor engines Handles wet and dry sleeves, you won't need to remove head studs The puller enables one technician to handle sleeve pulling tasks Not recommended for MACK engines Length: 34 " Width: 8.5 " Height: 3 " Item Weight: 25.75 lbs Seller Terms & Conditions 1. Shipping • Shipping charges: Standard shipping is FREE!

5 ton bar style puller set

Port Richey, Florida, United States
Jun 9th

30 ton push puller

Port Richey, Florida, United States
Jun 9th

We accept PayPal payments during checkout, and immediate payment is required for all transactions. Applicable sales taxes will be charged for all online orders, including processing and shipping charges. If you have any questions or concerns, feel free to contact us via email or phone.

2 ton capacity 2/3 jaw gear puller

Port Richey, Florida, United States
Jun 9th

Product Name 2 Ton Capacity 2/3 Jaw Gear Puller Features and Benefits: Forged from quality, heat treated, steel for maximum pulling power Can be assembled to make a two or three jaw puller when additional stability is needed Reversible jaw design for added versatility and a broader range of pulling capability Small size allows for pulling power in confined areas Max. reach: 3-3/8"; max. spread: 4-3/4"; min.

17-1/2 ton capacity push puller

Port Richey, Florida, United States
Jun 9th

Product Name 17-1/2 Ton Capacity Push Puller Features and Benefits: It can be used with several different attachments depending on the job Has 9-1/2" legs Maximum reach 11-1/2" with a spread of 3-1/8"-11-3/4" Screw size 1"-14 x 13-1/4" Weight 20 lbs. This push-puller gives you what you want and the tonnage capacity you need to tackle parts removal and installation on many models of cars, trucks, tractors and more.