x hammers for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

Rotary Hammer Drill Bits, 4 Pieces, Made in Germany by Steinmax, for Old Hilti TE-12 and TE-22 Rotary Hammers, New/Other: These rotary hammer bits pre-date the SDS Plus shanks and will not fit current SDS shanked rotary hammers. If you have an old Hilti or just a 1/2 “ chuck hammer drill this lot is for you. It includes: the following sizes: a 3/8” x 12”; 2 pieces 1/2 ” x 17 1/2 ” and a 3/4 ” x 12”.

Rotary Hammer Drill Bits, 4 Pieces, 1 Lot, Made in Germany by Steinmax, for Old Hilti TE-12 and TE-22 Rotary Hammers, New/Other: These rotary hammer bits pre-date the SDS Plus shanks and will not fit current SDS shanked rotary hammers. If you have an old Hilti or just a 1/2 “ chuck hammer drill this lot is for you. It includes 1 each of the following sizes: a 3/8” x 12”; a 1/2 ” x 12”; a 3/4 ” x 12” and a 1/2 ” x 17 1/2 ”.

Stanley 51-941 16-Ounce AntiVibe Curved Claw Forged Steel H

Item Description 3 Stanley Compo-Cast Ball Peen & Soft Face Hammers 57-530 54-532 54-516 These hammers are in good used condition. The ball peen hammers have some rust spots and dings . The small soft face hammer is in nice condition but does have a few small grease spots.

Item Description 3 Stanley Compo-Cast Ball Peen & Soft Face Hammers 57-530 54-532 57-533 These hammers are in good used condition. The ball peen hammer has some rust spots . The large soft face hammer has some minor cracks and dings in the face on one end.

Item Description 3 Stanley Compo-Cast Ball Peen & Soft Face Hammers 54-516 54-532 57-533 These hammers are in good used condition. The ball peen hammers have some rust spots . The 16oz.

Spline Shank Masonry Drill Bit - 4-Cutter, 1-1/8" x 18" x 23" Fits all spline rotary hammers Patented flute geometry removes dust from the hole quicker for fast drilling and long life Shot-peened, double-tempered finish reduces breakage Copper braze material gives high heat resistance for reduced tip loss All tips made to ANSI specifications Chrome vanadium shaft through-hardened to 50-53HrC Dimensions: 1-1/8" x 17" x 22" UPC: 0 24721 00831 2 Wt.: 2.9 lbs

Fits all spline rotary hammers Patented flute geometry removes dust from the hole quicker for fast drilling and long life Shot-peened, double-tempered finish reduces breakage Copper braze material gives high heat resistance for reduced tip loss All tips made to ANSI specifications Chrome vanadium shaft through-hardened to 50-53HrC Dimensions: 1-1/4" x 17" x 22" UPC: 0 24721 00284 6 Wt.: 2.634 lbs

THIS SALE IS FOR A BRAND NEW NEVER USED OEM GENUINE BOSCH BULLDOG EXTREME TAPCON 3/16 INCH X 6 INCH. SDS-PLUS, PART NUMBER=HC2312 IN ORIGINAL RETAIL PACKAGING. FREE SHIPPING TO THE DOMESTIC 48 CONTINENTAL STATES!!!!!!!!!!!!!!