x vise for sale, brand-new and used.

ANGLECUBE® A DIGITAL ANGLE CUBE WITH MAGNETS GAUGE FOR ANGLE & LEVEL SENSOR BEVEL GUAGE

Tool Maker Precision VISE, A-2 steel - hardened, ground, parallel within .0002" - outside measurements: 4.03" long x 1.77" wide x 1.74" - made in USA - Jaw width: 1.77" , jaw depth: .887" , jaw max opening: 2.16" - used, but in excellent condition - Buyer add $6.99 for shipping and handling

Tool Maker Small Precision VISE, A-2 steel - hardened, ground, parallel within .0002" - outside measurements: 3.36" long x 1.30" wide x 1.35" - made in USA - Jaw width: 1.30" , jaw depth: .67" , jaw max opening: 1.57" - used, but in excellent condition - Buyer add $6.99 for shipping and handling

Questions - Please call 704-290-7876 and ask for Clark or email cphillips6808@yahoo.com 9" x 16" Automatic Cut-off Bandsaw. Pneumatic system with filtration plant air required - Min 85 PSI @ Min 1 CFM (5.86 bar at .472 Lt. Sec) Recirculating coolant system.

Making the Small Shop Profitable, by John H. Van Deventer, originally published by The American Machinist, New York, NY, 1918. Re-published by Lindsay Publications, Bradley, IL, 1993.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

Western Machine Steptoe Shaper Operating Instructions and Parts List For models: ALL Note: This is a NOS manual in 6" x 8-3/4" format. Description: This is a New Old Stock Operating Instructions & Parts List Manual for the Western Machine Steptoe Shaper. It has instructions on operation, adjustments, Lubrication, and a parts list with cutaway views.

Milling Machines: Construction, How to Run, Tools, Typical Operations, by John T. Shuman, originally published by the American Technical Society, Chicago, Ill., 1942. Reprinted by Nation Builder Books, Mebane, NC, 2010.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1912, 1918: Volume 4, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, Bradely, Ill., 2011. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-398-5.

Milling Fixtures: Principles of Their Design and Examples from Practice, Machinery's Reference Book No. 4, Third Edition, originally published by The Industrial Press, New York, NY, 1912. Reprinted by Nation Builder Books, Leesburg, VA, June, 2003.

Shaper and Slotter Work, by John W. Schaffer and I.C.S. Staff, originally published in 1942 by the International Correspondence Schools, Scranton, Penn., 1942.

Lot of Five (5) Vintage Machinist Vise Tools Clamps Wooden Handle Hand Vise 1. Hand Vise (Red) - no marks 2. Hand Tool (Black) - X-ACTO 3.

Capacity 18" long x 25" high Blade at 45 degrees 18" long x 16 7/8" high Working surface 33" x 24" Height of table 34 1/2" Height of jaw 8" Drive 2 hp Blade speeds 50-450 fpm Height 94 3/4" Width 85" (with head tilted at 45 degrees) Length 93" 2695 lbs. Blade size 15'6" x 1" x.035" Currently set up for 3-phase 220V Can be switched to 3-phase 440V for additional charge One of the most popular metal cutting bandsaws in North America. It is a great saw for a fabrication or machine shop.

, BRIDGEPORT MILL,FOR THE HANDYMAN SN 77199 9" X 42" TABLE 1 HP, WIRED 440 VOLT POWERFEED ON TABLE STEP PULLEY WAYS ARE FAIR READ-OUT WORK BUT ONE SCALE MAY NEED SOME ATTENTION, BELIEVE BAD WIRE COLLETS, VISE, HOLD DOWNS SPINDLE RUNS GOOD

This item is being re-listed because the previous buyer changed the ship to address 3 times and wanted it shipped to an address different from the one shown on his PayPal account. We will ship only to a Paypal Confirmed address. This auction is for one very hard-to-find Derbyshire Mass.

This package sells for nearly $300 online. In very good condition. Very good versatile metal bender for small stock.