x vise for sale, brand-new and used.

This is a set of brand new jaw faces and screws from a Craftsman 4" vise. Measures approximately 4" long x 3/4" high x 3/8" thick. Holes are approximately 2 3/8" center to center.

FlexArm RNRM20-6 Pneumatic Tapping Unit w/ Table FlexArm RNRM20-6 pneumatic tapping unit with custom 80/20 table frame and 3/4" aluminum plate top. Will tap up to 3/4" thick steel. Table frame is black anodized 80/20 aluminum extrusion.

HHIP 3900-2104 Pro-S

Fresh from the FARM Thank you for your interest in Farm Girl Treasures. We will be offering over 100 items per week of great rural America barn finds that are fresh from the farm. So if you are a collector of the vintage, antique, primitive, shabby chic, rusty and crusty that has been found on

Well made accessory to machine shaft ends on rods. Main member is a metal rectangle 2 1/2 X 4 X 11 inches. This unit can be held in a milling vise or strapped to the milling machine table.

HHIP 3900-0183 Pro-S

This is a precision Milling Attachment With 2" Quick Release Vise + Tilt & Swivel Base. Here are the specs: Precision Milling Attachment With 2" Quick release vise with 1-5/8" clamping capacity Vise can be positioned in any of the 4 T-slots and adjusted vertically Vise can also be rotated at an angle

WILTON 4 Flat Vise Blue Used

Eron Model No. P400 Drill Press Vise 4" Steel Jaws 1 Grooved 1 Plain Japan Made This is a new old stock vise. This vise was purchased new but never mounted or used.

Product Features Home Work Shop Vise O Swivel base allows rotating the vise 240-Degree for versatility Holds 0.6" D to 1.85" D pipes and tubes Jaw width 4-1/2" Jaw opening 3" Product Dimensions: 11 x 11 x 7.5 inches

Vintage Toolmakers Machinist Precision Vise, 2-3/4" x 1-3/16" Jaws, 3" Maximum a.imagelink {color:#000006;} a:hover.imagelink {color:#000006;} a:visited.imagelink {color:#8f8f8f;} a.imagelink img.auctionimage { border: 2px solid #000006; } a:visited.imagelink img.auctionimage { border: 2p

Wilton Tool 10010 Tr

Thank You For Looking At Our Products Product Information:Mitee-Bite Double Wedge OK-Vise ClampManufactured by Mitee-Bite Products CompanyMade in Finland Product Features & Specifications:

Nice vise, in good condition VERY heavy 170 pounds Opens to 7" wide by 8 5/8" X 2 3/8" tall Jaw Over all 29" X 13" X 6"

Machinist Grinding Vise Precision Tool - 7 1/2"x 2 7/8"x 2 1/2" - Inspection This is a good condition Machinist Grinding Vise. I believe the manufacturer to be Parlec. Not completely sure.

Nice vise, in good condition VERY heavy 150 pounds Opens to 8" wide by 8" X 2 1/4" tall Jaw Over all 35" X 11" X 6"

This is a heavy duty vise grip style pliers with two 1 1/4" x 2 1/2" x 1/4" thick plates welded on to the jaws. Great for clamping welding projects. I sold 50 of these previously and had no complaints with any.

***NEW, NEVER USED*** 4" CROSS SLIDE DRILL PRESS VISE BGBV7800

I chose "Seller Refurbished" as , being the original owner of this cross vise , I cleaned and re-greased all the slideways as it is in excellent condition ! All though made in China , this vise is very much heavy duty ; I think I used it 3 times since purchasing it brand new ! Dimensions are as follows : Base is 9 3/8" L x 5 5/8" W x 1 9/16" high , and has (3) slots per side and (1) slot at the end for convenient drill press table bolt down !