z shape for sale, brand-new and used.

This Is a Original Manual Book from 1920 FAIRBANKS-MORSE 2548A 1 1/2 3 6 HP Z & ZA Bosch Equipped HIT MISS ENGINE Instructions for setting up and OPERATING MANUAL FAIRBANKS-MORSE 2548A 1 1/2 3 6 HP Z & Throttling Governor Engines Model ZA Bosch Equipped Dated 1920 FAIRBANKS MORSE & Co Book Manual with 16 pages The pages are seperating from binding but other then that in good shape

Fairbanks morse type ZD in NICE shape, no cbw"s magneto gear with hardware ( the nut and 2 washers ) original part sold as is due to age shipping is 9.00 , that's with Canada post , takes usually 6 -12 business days paypal only

This is a real nice original ignitor for a Fairbanks Morse gas engine. It is for the earlier 3 and 6hp engines that used a low tension rotary magneto for ignition. It is in excellent original condition with no cracks, breaks, or repairs of any kind.

This is a rather hard to find original fuel mixer or carburetor for a Fairbanks Morse Z gas engine. It is in good original condition with no cracks, breaks, or repairs of any kind except that it needs a new fuel jet that delivers gas to the head. This is nothing more than a small piece of copper tube in place where my finger is pointing in one of the pictures.

This is a very hard to find original ignitor for a Fairbanks Morse Headless Z hit and miss gas engine. It is in good original condition with no cracks, breaks, or repairs of any kind. It mounts with two 7/16 inch holes 2 7/8 inches apart on center.

This is a very hard to find original cast iron starting crank for a Fairbanks Morse Dishpan Z hit and miss gas engine. It is in perfect condition with no cracks, breaks, or repairs of any kind. It has a 1 1/2 inch bore and would certainly work on any engine that it fits on but it came from the factory with a Fairbanks Morse Dishpan Z engine.

Up for sale is the hard to find crank guard for the 3hp Fairbanks Morse type Z engine. In great shape. Has the notch in it for engines with the gear drive magneto.

Up for sale is an original tag for the Fairbanks Morse Type Z engine. 3 hp. Good shape.

This is a connecting Rod for an old Fairbanks Morse Z D Stationary / Farm Engine. This fits both the 1 1/2 & 2 HP version of this engine.It is in good USED condition.This is a part that is pretty tough to locate, in GOOD CONDITION.The pic shown may or may not be of actual item selling,but the quality will be the same.If this is an issue, ask & I will tell you & get a pic of actual item if wanted.The Rod itself is in good shape,but will need a new big end bearing.

This is a connecting Rod for an old Fairbanks Morse Z D Stationary / Farm Engine. This fits both the 1 1/2 & 2 HP version of this engine.It is in VERY good USED condition.This is a part that is pretty tough to locate, in GOOD CONDITION.The pic shown may or may not be of actual item selling ,but the condition will always be the same.The Rod itself is in very good shape,With Very nice Bearings in Both Ends along with lots of shims & Nice Oil Splasher. this is a very nice rod.

Here is a real nice original cast iron magneto gear for a Headless Fairbanks Morse gas engine. It is part number DJ 142 and measures about 3 3/16 inches in diameter with a 1/2 inch face. It has a 3/8 inch hole for the magneto armature shaft and the keyway is in great shape.

Here is a real nice original cast iron magneto gear for a Fairbanks Morse gas engine. It is part number ZB 142 and measures about 3 11/16 inches in diameter with a 1/2 inch face. It has a 3/8 inch hole for the magneto armature shaft and the keyway is in great shape.

**WHAT IT IS** Here's a used original Briggs and Stratton Cam Gear part #61454 for models K and Z engines. Not for use in ZZ engines. In Good Shape, should be cleaned before use.

Up for sale is a tin pulley for the Fairbanks Morse Type Z engines. Came off a 3hp and should also work on the 6hp. Comes with original clamps.

Here is a Sumter Plug Oscillator magneto igniter bracket that I think fits a 3hp or 6hp Fairbanks Morse Z engine. It is in pretty good shape and ready to use. There is one small area that is a casting flaw or chip, it is very minor and will not hurt anything (see my finger pointing in one picture).

DELTA JOBOX JOB SITE TOOL STORAGE TYPE: PIANO BOX WIDTH: 60" DEPTH: 31" HEIGHT: 50" COLOR: BROWN NUMBER OF DOORS: 1

Replaces Hobart Model # 16223-Z Obviously the one on the right is pretty trashed, but you can still use the shaft as a spare The one on the left is in great shape but it has a chunk missing on the edge, but I don't think that will hinder performance Buyer pays $16 to ship UPS Ground lower 48 states

253 SIGN LETTERS AS SEEN IN PICS THEY ARE ACTUALLY 9 7/8" THEY ARE FLEXIBLE AND ARE ABOUT CREDIT CARD THICKNESS. THEY ARE NOT BRITTLE AT ALL. VERY FLEXIBLE.