zinc screws for sale, brand-new and used.

LOT OF 47 HILLMAN LAG SCREWS HEX HEAD 3/8" x 4 1/2" ZINC PLATED STEEL ITEMS ARE BRAND NEW !

LOT OF 72 HILLMAN LAG SCREWS HEX HEAD 3/8" x 3 1/2" ZINC PLATED STEEL ITEMS ARE BRAND NEW !

LOT OF 150 HILLMAN LAG SCREWS HEX HEAD 5/16 x 3. 1/2" ZINC PLATED STEEL ITEMS ARE BRAND NEW !

Climax Metal 1C-243-Z One-Piece Clamping Collar, Zinc Plating, Steel, 2-7/16" This Climax Metal one-piece clamping shaft collar is made of zinc-plated steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts.

These are low profile RoHS zinc plated steel with half hexagonal and half round body nutsert which provides easier installation, they are also called hex inserts or hexserts. When installed into a corresponding hole, the corners of the inserts expand to fill the hole providing exceptional resistance to spinning. Hex inserts are ideal for applications where fastener failure is not an option requiring prevailing torque locking screws.

I am selling a quantity of 190 new 6-32x1/4 zinc Phil Pan Sems screws.Please review pictures, they should say all. THANKS!

0523F4G.35 New / Old Stock US Air Force Surplus Screws. Each bid quantity is for a Lot of Four Hundred (400) Pieces. You may bid / buy any number of lots, up to the total quantity available above.

0529F4G.73 New US Air Force Surplus Screws. Each bid quantity is for a Lot of Three Hundred Fifty (350) Pieces. You may bid / buy any number of lots, up to the total quantity available above.

Here is a box of 100 very High quality Tapping Screws; project quantity available. Free shipping USA only. **gar14 for inventory purposes** MRC: Requirement Name: Requirement: AASB FASTENER LENGTH 0.500 INCHES NOMINAL

These screws are used to screw light guage steel, galvanized or aluminum roofing panels (24ga - 18ga) to a structural purlin. They are made from case hardened heat-treated steel and have a zinc coating. They are a #12 screw, 1" long, cupped head, have a self sealing washer, have a self drilling point and use a 5/16" standard screw bit.

UP FOR BID IS A PACK OF #10 x 3/4 HEX WASHER SLOTTED STEEL ZINC PLATED SHEET METAL SCREWS 1000 PIECE PACK MORE THEN 15 PACK AVAILABLE STARTING BID IS $18.00 OR BUY IT NOW FOR $23.50 PLUS SHIPPING WINNING BID PAYS SHIPPING AND HANDLING IN THE U.S. ONLY PLEASE FEEL FREE TO CONTACT ME IF YOU ARE LOOKING FOR MULTIPLE PIECES COMBINED SHIPPING AVAILABLE!!

New

Lot of (800) slotted / indented hex washer head self-threading sheet metal screws. These zinc plated screws are size #10 and are 1" in length with a 5/16" hex. The type A screw is designed for use in sheet metal from .015 to .050" thick with pre-drilled or punched holes as well as some plastics, impregnated plywood, and other materials.

Lot of (1200) slotted / indented hex washer head self-threading sheet metal screws. These zinc plated screws are size #8 and are 1" in length with a 1/4" hex. The type A screw is designed for use in sheet metal from .015 to .050" thick with pre-drilled or punched holes as well as some plastics, impregnated plywood, and other materials.

Lot of (2000) slotted / indented hex washer head self-threading sheet metal screws. These zinc plated screws are size #6 and are 3/4" in length with a 1/4" hex. The type A screw is designed for use in sheet metal from .015 to .050" thick with pre-drilled or punched holes as well as some plastics, impregnated plywood, and other materials.

0526F4G.81 New US Air Force Surplus Screws. Each bid quantity is for a Lot of Two Hundred Fifty (250) Pieces. You may bid / buy any number of lots, up to the total quantity available above.

SORRY INCORRECT PICTURE 1000 PIECES 7 X 1/2 HEX WASHER ZIPS STEEL ZINC