1 2 13 bolt for sale, brand-new and used.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 5 sets of Mini, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/4"-20 removable threads, 2" long, with knurled nuts.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

SQUARE U-BOLT Electro Galvanized It's New and Includes Two 1/2" Hex Nuts, Two Spring Washers and Two Flat Washers

WELCOME! UP FOR AUCTION IS A

Double-Acting push/pull hydraulic Threaded-Body Cylinder with plunger head Bolt Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the work piece surface irregularities,also deflection and vibration under machining loads.&nb

We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! NL Condition: GREAT Specifications: Type: B1 - Drilled holes on the outer-bolt circle, tapped holes on the inner-bolt circle For use on 12" lathe chuck Plate Diameter: 11" Plate Thickness: 2-1/4" Through Hole: 4-1/2" Outer-Bolt Holes Diameter: 13/16" Outer-Bolt Holes Center to

1/2"-13 SHORT T-SLOT BOLT ASSORTMENT SET Heavy Duty 4140 Steel

These bars and brackets were custom made by a company that built machine frames and were intended for setting up and prototyping machine bases and frames. Material is Nickel plated machined steel Please note: If you purchase this item we will ship a few bars and brackets to you for inspection before shipping entire amount. Free shipping to businesses located in the continental United States that have a standard loading dock easily accessible to standard over the road freight trucks.