Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.
Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.
Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.
This item is a vintage Lathe Tailstock Pipe Center for metal lathe. The largest diameter is 2-7/8" and the smallest diameter is 25/32". The diameter of the center hole is 5/8".
This 3/4" pipe clamp set incorporates standard Acme cut steel threaded screws for a securing hold and final tightening. The tail-stop features a multiple-disc-clutch for fast easy adjustments while holding work securely. Often considered the industry standard for pipe clamps, "Pony" clamps are made in the USA and designed to be used on standard 3/4" black pipe to offer the flexibility of creating any clamping length.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.