1 to 3/4 reducer for sale, brand-new and used.

We do honor our 14 day return policy, if you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES, IS WHAT WE SEND TO YOU!!!!

This 4 pc set is now being offered with our PREMIUM X-BARS. Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton (or less) presses with, front to back, gap of about 4.25 inches.

DODGE TIGEAR 2 RIGHT ANGLE WORM GEAR SPEED REDUCER PART # 35S30R RATIO 30:1 MAX TORQUE OUT: 3682 LBS-IN MAX HP IN: 4.15 HP THERMAL INPUT HP: 4.43 HP MECHANICAL OUTPUT HP: 3.41 HP INPUT RPM: 1750 OUTPUT RPM: 58 SERVICE FACTOR: 1.0 O

DODGE TIGEAR 2 RIGHT ANGLE WORM GEAR SPEED REDUCER PART # 35S25L RATIO 25:1 MAX TORQUE OUT: 3586 LBS-IN MAX HP IN: 4.72 HP THERMAL INPUT HP: 5.1 HP MECHANICAL OUTPUT HP: 3.98 HP INPUT RPM: 1750 OUTPUT RPM: 70 SERVICE FACTOR: 1.0 OVERHUNG LOAD CAPACITY: 2760 LBS OUTPUT DIRECTION: LEFT SEPAR

SHAMROCK PIPE TOOLS, inc. CHISEL JETTER NOZZLE. HAS 4 REAR JETTS, 4 FORWARD.

PENETRATER SUPER GERNADE RAM STYLE JETTER NOZZLE. Has 1 forward 5 Rear. All JETTS are good condition.MADE BY SHAMROCK PIPE TOOLS, inc.Not a cheap JETTER Nozzle, very high quality.I USED A REDUCER FITTING TO REDUCE IT DOWN TO 1/2 and it works great.

BOSTON RIGHT ANGLE GEAR REDUCER F721-20-B5-G SINGLE REDUCTION SHAFT ASSEMBLY CODE: G TORQUE CAPACITY (LB-IN): 754 BORE CODE: B5-56C MOTOR HP: 1 OUTPUT SHAFT DIAMETER: 1.25" MAXIMUM INPUT HORSEPOWER: 1.4 @ 1,750 RPM HP RATIO: 20:1 NEMA / IEC FRAME SIZE: 56C INPUT TYPE: C-FACE QUILLED OUTPUT TYPE: SOLID SHAFT OUTPUT DIRECTION: RIGHT INPUT SIZE: 5/8" OUTPUT SIZE: 1" CENTER DISTANCE: 2.06" MANUFACTURER REDUCER SIZE: 721 MAXIMUM OUTPUT RPM: 87.5 @ 1,750 RP