1/2 concrete anchor for sale, brand-new and used.

5 Pc~ 3/4 X 8-1/2 Wedge-All Wedge Concrete Expansion Anchor #900.02.34.812 Bolts & Washers included New with tags The Wedge-All® wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.

Sleeve Anchor, Head Style Flat, Stainless Steel, Anchor Dia. Work Thickness 1-1/8 In., Min. Embedment 1-1/8 In., Ultimate Shear in 4000 PSI Concrete (Lb.) 1620, Ultimate Tension in 4000 PSI Concrete (Lb.) lot of 13

Powers 09525 PWF 1/2 DOUBLE MACH Screw ANCH Anchor, Double Expansion; 1/2 in Anchor Size; 13 Tpi; 7/8 in Drill Size; 2-1/2 in Anchor Length; 3/4 in Thread Length; Zamac 7 Alloy Material; 6570 lb For 2000 Psi, 9065 lb For 4000 Psi, 9250 lb For 6000 Psi Concrete Load Rating; Powers Brand Box in bad shape item perfect

Protect Your Stuff

1 Box of 50 Powers fasteners 1/2" x 2 3/4" Anchor Power-Stud+® SD1* Wedge Expansion Anchor For Use With Strength Design The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over metal deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip.

Much better than the cheap Rubbermaid and a lot cheaper. 5-Pack Wire Shelf Anchors with Retainer Clips and #8 x 1-3/4-in Screws Holds up to 167 lbs in 1/2 In. drywall with #8x1-3/4 In.

LISTED AUCTIONS: I am selling a large quantity of various anchors, fasteners, staples & construction hardware for below cost. There is a limited quantity on these items so get them while they're available. COMBINNED SHIPPING: If there is more than one item in listed auction there will usually be a discount on additional purchases if possible.

Stop replacing anchors every time you change a fixture. When you unthread the screw, these anchors stay put. To install, push the toggle through a drilled hole and pull the anchor back toward you until the toggle rests flush against the wall.

The OMG Masonry Anchor is designed to attach termination bar to concrete or masonry walls.