100 hp phase converter for sale, brand-new and used.

NO RETURNS ACCEPTED IF DAMAGED IN SHIPPING DO NOT RETURN. YOU WILL BE IN CHARGE OF ALL THE SHIPPING DETAILS. Phase Converter, Rotary, Input Voltage 208-240, Output Voltage 208-240, Input Phase AC 1, 3, Input 60 Amps, 28, Largest Motor HP 10, Depth 16 In., Width 16 In., Height 16 In., Multiple Motor HP Range 10-30, Knockout Size 1 In., Motor Load Rating 100% Rotary Phase ConvertersProvide full running 3-phase power to 220/460V 3-phase motors, normally with full running torque, in

[ Phase-A-Matic R-5 5 HP 208-240V Rotary Phase Converter

15 Hp Ametican Rotary phase converter in excellent condition. Less than 100 hours use.

FOR SALE IS A DO IT YOURSELF 3-PHASE CONVERTER TO RUN FRACTIONAL HORSEPOWER 3-PHASE MOTORS WITH SINGLE PHASE POWER. SPECIFICATIONS:PEMS MODEL: AR5 MFD CAPACITOR30 MFD CAPACITOR6" GALVANIZED BREAK OUT BOXSPECIFICATIONS AND WIRING DIAGRAM CONDITION:NEVER ASSEMBLED, NEEDS TO BE WIRED AND MOUNTED INSID

Rotary Phase Converter to convert 220volts 1phase into 220volts 3 phase to power machinery Motor Load Rating: 100% Output phase AC: 3 Knockout Size (In.): 1 Output Voltage: 208-240 Output HP: 5

New American Rotary panel with a used idler motor. You do not have to pay for the converter until you see and hear it run. I am located just Southwest of downtown Los Angeles near USC.

Auction includes: - One (1) American Rotary 30 horse power phase converter. Converts single-phase utility power into 3-phase electricity to operate 3-phase equipment. Again,this is a 30 HP converter.

I purchased this unit for a 3 phase lathe that I sold just before the unit arrived, so I did not need it, nor did my buyer who has a shop with 3 phase power. I would have returned it to the seller/manufacturer, but let too much time elapse (approximately 8 months since I purchased). I had used a similar circuit with my lathe, home-brewed, and was happy with the performance and never bothered by the motors ability to deliver less than 100% full power when using the device.

Rockwell Automation > Drives > Component Drives >

This is the real McCoy - The original Roto-Phase. Made by Arco Electric of Shelbyville Indiana. I needed more HP in my shop so I changed it out.

For Sale is a Kent 1340 Gap lathe which when the gap is removed will swing over 18". I bought this machine new and have only put about 20 hours on it. The paint is like new, it is powered by 220 SINGLE PHASE which can be run off of house current without using a phase converter.

Home | F.A.Q. |

Home | F.A.Q. |

Home | F.A.Q. |