1000 440 for sale, brand-new and used.

Sterling Liquid Ring 2 Stage Compressor Model KPH 65212 BN.X2K.WJE, Stainless Steel Suction volume flow: 375 to 440 m3/h Compression Over Pressure: 6.5 to 7 bar Pump Weight: 1000 pounds Characteristics: Pumping of nearly all gases and vapours

All Auctions Start at $3.99 Inventory Number:09140970024 Manufacturer: Description: 2 FLOW-TEK 70

One used 1000 gallon walker mix tank, with heating coil, stainless steel construction, Approx 68" diameter X 72" straight wall, slant bottom, 3" side bottom outlet, dished top, top center mount agitator, steam coil has been added to this vessel. manway cover is missing We are Cleveland Process Equipment and specialize in the sales of used Pharmaceutical, Chemical And Plastic machinery. All auctions are subject to prior sale.

Trinetics Group Incorporated Branson 910 IW Ultrasonic Welder Technical Specifications: Line Voltage: 117V AC, 1A,, 14 amps Ouput Power: 1000 watts Max. Clamp Force: 440 lbs. at 100 psig (1.96 kN @ 690 kPa) Dynamic Triggering:

(one) chemical slurry mixing blending pump transfer skid, includes slant bottom intake hopper, 30" x 28" x 36" deep with 12" opening at top, Effector high and low limit proximity sensors, hopper bottom electric vibrator, 9’ long x 4" diameter auger screw feeder that dumps into a 16" x 18" x 50" high pre-mix tank compartment with Mamec Oy mixer agitator, model HDS 5.5/1000, 6.5 KW, 1150 rpm, 440/480 vac, direct drive with dual stagger tooth impellers.

This auction is for one 32mm IQ ( Intelligent ) Surface Mount Tape Feeder and one 32mm tape feeder reel arm for QUAD Q series and C series pick and place machines. This is a newer 8 pin feeder and will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1 / Plus, QSP-2, QSX-1, QSP-2, C4, C2, 3,QSA, APS-1 and 4000C and 1000.

This auction is for 4 16mm IQ ( Intelligent ) Surface Mount Tape Feeders and 4 16mm tape feeder reel arms for QUAD Q series and C series pick and place machines. These are newer 8 pin, deep pocket, 5volt /12volt feeders and not the very old 5volt only 5pin feeders or shallow pocket 8pin feeders.They will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1 / Plus, QSP-2, QSX-1, C4, C2, C3,QSA, APS-1 and 4000C and 1000.

This auction is for 3 24mm IQ ( Intelligent ) Surface Mount Tape Feeders and 3 24mm tape feeder reel arms for QUAD Q series and C series pick and place machines. These are the newer 8 pin, deep pocket, feeders and they will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1 / Plus, QSP-2, QSX-1, C4, C2, C3,QSA, APS-1 and 4000C and 1000.

This auction is for 4 12mm IQ ( Intelligent ) Surface Mount Tape Feeders and 4 12mm tape feeder reel arms for QUAD Q series and C series pick and place machines. These are newer 8 pin, 5volt /12volt feeders and not the very old 5volt only 5pin feeders. They will work on the newer intelligent base machines as well as the older non IQ machines.

This auction is for one 44mm IQ ( Intelligent ) Surface Mount Tape Feeders and one 44mm tape feeder reel arms for QUAD Q series and C series pick and place machines. This is a newer 8 pin feeder and will work on the newer intelligent base machines as well as the older non IQ machines. Including but not limited to QUAD QSV-1 / Plus, QSP-2, QSX-1, QSP-2, C4, C2, 3,QSA, APS-1 and 4000C and 1000.

Hello bidders, my name is Levi Shiner; I am a certified Miller Technician. What we do is buy and rebuild power sources as well as wire feeders. This unit is our first unit that has made it to the online auction process.

Very nice Miller Summit 1000 AC/DC with complete sub arc system ready to work, power source, feeder, hopper, reversing switch, cables and accessories local pickup n/c, will load your truck n/c, 10% dwn by paypal, bal by wire transfer, will require 2 pallets

nice used Lincoln DC1000 welder with NA-5 sub arc system, has been stored in warehouse for several yrs, local pickup or will load your truck n/c, 10% down thru paypal, balance wire transfer

This is a used Lincoln DC 1000 Multi-Process Welder. In good working condition. Processes Stick,Mig,Flux-core submerged arc welding and gouging.

Miller Dialarc 250 AC/DC Arc Welder 1PH Volt 230-575 Amp 90-36 $ 1000.00 ITEM: Dialarc 250 AC/DC Arc Welder 1PH Volt 230-575 Amp 90-36 MAKE: MillerPRICE: $ 1000.00 ---Shipping costs wi

Very heavy duty well engineered and smooth running 24" drill press. (12" from center of the spindle to column). Tach type speed indicator missing glass lens.

Striebig Compact Vertical Panel Saw