Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.
Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.
Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.
All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item.
1,150 Gallon SS Pressure Rated Tank, Dome Top Dish Bottom Last used in a Distillery MFG by ADM Serial #T-03386 NB #03386 Pressure Rated tank MAWP 15 PSIG 300^ F Max Temp rating Dimensions 60" dia x 96" sidewall Overall Height 148" 34" Legs 12" Dome top 12" Dish Bottom 4" Center discharge with 8 bolt ANSI Flange fitting Multiple inlet ports
All domestic (USA) and international customers welcome to bid (i.e. Canada, Europe, Australia, New Zealand, Taiwan, Japan, Korea and China) Excellent/Very Good Condition! Here's an opportunity to acquire a rare/hard to find 17.25-inch diameter Huntington Vacuum Wire-S
New Boltex 3 150 B16 SA105 STD 4 hole galvanized weld flange 7 1/2 OD 3" ID. NOTE: ALL MACHINERY IS SOLD AS IS, WHERE IS WITH NO WARRANTY OR GUARANTEE. ALL MACHINE SAFEGUARDING AND OSHA REQUIREMENTS ARE THE RESPONSIBILITY OF THE BUYER.
A total of 4 - 2-inch 150 lb flange Asahi valves Pvc ball style. Valve can dismantle with strap wrench as it screws apart on both sides. Also 2 inch SCH-80 90 degree elbows, close nipples and union.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.