150 flange for sale, brand-new and used.

1,150 Gallon SS Pressure Rated Tank, Dome Top Dish Bottom Last used in a Distillery MFG by ADM Serial #T-03386 NB #03386 Pressure Rated tank MAWP 15 PSIG 300^ F Max Temp rating Dimensions 60" dia x 96" sidewall Overall Height 148" 34" Legs 12" Dome top 12" Dish Bottom 4" Center discharge with 8 bolt ANSI Flange fitting Multiple inlet ports

Genuine U.S. Military Issue Surplus   Rubber Expansion Joint with Flanged Ends 8 Hole Steel Flange Each hole is 3/4" Inner Diameter On the steel flange it has... ASA 150 LBS 4" On the rubber it has...

THIS IS FOR A LOT OF 20 WITH FREE CONTINENTAL UNITED STATES SHIPPING ONLY

Napac inc. flange accessory pack 6 inch, ANSI class 125/150 3 full unopened sets and a few extra bolts.

Flexible pipeline spacer Vibration damper 8in ID x24 inch 150psi Flanged Unused This is an unused pipeline spacer made by Garlock, part number 3111-0824-11-08. This can be used as a vibration damper or sound absorber also. This has been in long term storage but appears to have no deterioration.

4" Grinnell Series 8000 Butterfly Gate Valve WC-8181-3 WP 250 0-90 Deg In good working order. no instructions or original packaging.I found manuals online @ http://50.244.15.10/techlib/Grinnell/Grinnell%20Butterfly_Valves-8000_Series.pdf

This Sale Is For Twenty Laboratory Surplus MDC CF Conflat Flange Aluminum 12 Point Bolts For Size 8" DN-150 DN-160 Flanges. They Are In Excellent Operational And Ok Cosmetic Condition. Buyer To Pay $4.95 For Shipping.

This Sale Is For A Laboratory Surplus MDC CF Conflat Blank End Cap Seal Flange Plate 8" DN160 Vacuum Fitting. This Item Is In Excellent Operational And Cosmetic Condition. Buyer To Pay $8.95 For Shipping.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 5 sets of Mini, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/4"-20 removable threads, 2" long, with knurled nuts.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.