16 blind flange for sale, brand-new and used.

Lot of (175) open end blind pop style rivets with a dome head. These 3/16" diameter x 1/4" long all steel zinc plated large flange rivets have a grip range of 0.187" to 0.250" (3/16" to 1/4"). This rivet requires a #11 drill.

Lot of (150) open end blind pop style rivets with a dome head. These large flange 3/16" diameter x 3/8" long all aluminum rivets have a grip range of 0.250" to 0.375" (1/4" to 3/8"). * Please note that the rivet length is specified by the maximum grip length and not by the physical measured length of the rivet body.

Lot of (175) open end blind pop style rivets with a dome head. These large flange 3/16" diameter x 1/4" long all aluminum rivets have a grip range of 0.126" to 0.250" (3/16" to 1/4"). * Please note that the rivet length is specified by the maximum grip length and not by the physical measured length of the rivet body.

Lot of (150) open end blind pop style rivets with a dome head. These large flange 3/16" diameter x 5/8" long all aluminum rivets have a grip range of 0.501" to 0.625" (1/2" to 5/8"). * Please note that the rivet length is specified by the maximum grip length and not by the physical measured length of the rivet body.

Lot of (150) open end blind pop style rivets with a dome head. These large flange 3/16" diameter x 1/2" long all aluminum rivets have a grip range of 0.376" to 0.500" (3/8" to 1/2"). * Please note that the rivet length is specified by the maximum grip length and not by the physical measured length of the rivet body.

Lot of (500) open end blind pop style rivets with a dome head. These large flange 1/8" diameter x 1/4" long all aluminum rivets have a grip range of 0.188" to 0.250" (3/16" to 1/4"). * Please note that the rivet length is specified by the maximum grip length and not by the physical measured length of the rivet body.

POP Rivet ALL Stainless Steel Large Flange 68LF, 3/16 x 1/2, USA, Qty 25 {SIR-G}

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.