17 floor buffer for sale, brand-new and used.

PBU Kawasaki 27" Propane Floor Buffer/Burnisher Condition: Untested. Signs of wear - See Pictures 17 HP Kawasaki Motor Located in Neshkoro, WI - 1 hour drive from Madison, Stevens Point, Appleton, Fond Du Lac & 45 minutes from Oshkosh Pick Up is preferred. I will ship if you need me to.

3M Red Buffer Pad 5100, 17" Floor Buffer, Machine Use (Case of 5)

17" 1.5 hp Industrial Scrubber, Buffer, Cleaner. SPECIAL PRICE ************* NEW IN BOX Made in the USA not China like other machines MERCURY FLOOR BUFFERS *1.5 HORSE POWER INCLUDES PAD HOLDER*

Gunn Brush Co is offering a heavy duty ( weighs 12.5 lbs) 16" diameter Sandpaper driver with riser, to fit on your 16" & 17" floor machine for floor sanding. Brand new from inventory, these are heavy duty contractor grade units.This sanding driver allows you to use your floormachine to sand floors with sandpaper, or mesh screens.Heavy duty plywood construction, with a neoprene face.

17" mesh buffer floor sanding screens Prof

15" disk 17" span on brush with the flair. brush attachment for floor scrubber. 1 3/4 inches of bristles.

Gunn Brush Co. Inc. is offering a great 17" diameter floorpad driver for driving floor pads .Brand new from our inventory.

start_elivehelp_btncode end_elivehelp_btncode

17" mesh buffer floor sanding screens Professional grade screen.

17" mesh buffer floor sanding screens Professional grade screen. Top of the line screens for the professional floor sander. You will not be disappointed. 

Dust Skirt for most 15, 16, and 17" buffers. Heavy Duty fabric doesn't rip like the original Clarke skirt 10240A works best with the Clarke Rubber Bumper Welcome to Brosson Floor Finishing Solutions!

Diamabrush by Malish 17" Coating Removal Tool For Floor Machines For counter-clockwise machines. The Diamabrush™ Mastic Removal Tool is designed to remove stubborn coatings from concrete such as mastic, carpet or tile adhesive, thin-set and thin mil coatings like urethane or paint. No need to waste time and money on heavy grinding equipment or harmful chemicals.

These 17 inch red pads are typically used with a pad driver that is connected to a 17" floor buffer to buff or scrub a commercially finished floor. On machine speeds between 175 and 350 RPM. Each case contains five 1" thick pads that can be used to remove slight scuff marks and scratches on smooth floors.

Used older model Pacific Model 17 (17") low speed floor machine, S/N 72528A. It is 3/4 HP and I believe it spins at about 175 RPM. Motor runs, drive spins when handle switch is pulled.

3M 8392 Buffer Pad 5100 17" Red Description: Buffer pads are specially designed for spray cleaning or dry buffing during floor maintenance. Use with rotary or automatic equipment with low speeds from 175 to 600 RPM. Each Red Buffer Pad 1500 cleans when damp and buffs when dry.

SquareTrade © AP6.0

SquareTrade © AP6.0

Used but in good working condition.