New, never used, was stored with installed AA batteries. Batteries leaked -- the contact slightly corroded but are cleaned (see picture). Features Hand-Held and battery operated100kHz to 2900MHz measurement range (2060MHz for 3201)125 Ch/sec scan rate (12.5 Ch/sec for 3201)Built-in 2.9GHz frequency counter (2GHz for 3201)High sensitivity (-117 dBm max)Detects Wide band and Narrow band FM, AM and Single Sideband
Features Hand-Held and battery operated100kHz to 2900MHz measurement range (2060MHz for 3201)125 Ch/sec scan rate (12.5 Ch/sec for 3201)Built-in 2.9GHz frequency counter (2GHz for 3201)High sensitivity (-117 dBm max)Detects Wide band and Narrow band FM, AM and Single SidebandSignalsPhase lock loop for precise frequency tuning
Aluminum Angle 1.25 x 1.25 x 48 in, 1/16 in thick, NEW!, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 1.25 x 1.25 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, and sometimes from our truck.
Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.
Aluminum Angle 3/8 x 3/8 x 48 in, 1/16 in thick, NEW! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/8 x 3/8 x 48 x slightly less than 1/16in thick. We ship from three locations including NC, OH, FL, and sometimes from our truck.
Aluminum Angle 1-1/2” x 1-1/2” x 21.5 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – These are left over from a project. The length varies from 21.5 to 22in long.
Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 1/2 ” x 1/2 ” x 24 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Cigar Box Saddle / Bridge Aluminum Angle Stock for DIY guitar, fiddle, banjo, Description – This is for anyone who wants to make their own Saddle / Bridge for a Cigar Box instrument. They measure 5/8 x 1-1/2 x 1/8 thick x 48 inch long and you can cut to any length you desire or we can cut for a fee.
Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.
Start You Own Metal Business, 10 sizes, Aluminum Angles and Flats Description – This is for anyone who would like to start their own aluminum metal business or for any shop that needs lots of different sizes in their day to day operations. This listing including the display stand, but you can get the angles and flats for $50 less if you have your own di
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
