24 bandsaw for sale, brand-new and used.

For sale is a DoAll 16" variable speed bandsaw with High and Low gears. Saw is equipped with Hydraulic power feed ,in good working condition. Saw has just had variable speed pulley rebuilt, New drive belts, New tires on drive and idler wheels.

WE BUY OBSOLETE AND EXCESS INVENTORY! LOCAL PICK UP ONLY! Please bid ONLY if you can come and pick this up in San Diego (Mira Mesa area) within 5 days of winning bid.

ACCURA-COMATIC 03344 (AF-10) BANDSAW RESAW POWER FEEDER Model 03344 Comatic model AF10 For saws up to medium duty 24" throat 1/8HP, 220 volt, single phase, 0- 60 ft. per minute feed rate

you are bidding on 4 brand new Peerless Aristocrat bandsaw blades they are new old stock these are wood cutting blades the size is as follows width 3/8" length 12`6" gauge 24

PORTABLE BAND SAW MIKESKA RPP 290

ACRA BS250A HORIZONTAL BANDSAW Model # BS250A Made in Taiwan Weight: 920 lbs Step Pulley Features Series: 250A Capacity Round: 10" Capacity Rectangle: 9" x 15" Blade Speed: 82,131,167,233 FPM Blade Size: 1.06 x 0.35 x 130" Main Motor: 2HP Volatage: 220/440V AC/3PH Coolant

Task Tools T26648 General Purpose Band Saw Blade, 93-Inch by 3/8-Inch

Unused with defect Qty. (1) Jet JWBS-18 Woodcutting Bandsaw purchased in October of 2004, uncrated and placed on the "dolly" seen in photo (1). The photos provided are as follows: 1.) Machine - front 2.) Right Side & Wheel Well Misalignment 3.) Back

Task Tools T26661 General Purpose Band Saw Blade, 56-1/8-Inch by 1/8-Inch

Wahlstrom Float lock Bandsaw Vise This hand-held vise tool is for clamping and holding while cutting or doing some other work on the clamped part. For example, you could clamp two or more pieces together in proper alignment and then drill or saw them freehand all at once. Or perhaps you need to clamp a part that cannot be disassembled from a larger item.

24" neck capacity and 9" depth of cut combined with ultra simple, heavy duty construction put this bandsaw in a category all its own. Does not work as is. Motor, wiring, switch, and blade are not included.

Bandsaw in Excellent condition.  Please message me with any questions or if you need more description about the product. Comes w/ the mobile base saw and  light.

This thing is basically brand  new. We used it for steel but is ideal for wood. It has an electronic speed control that we had them install for over 1000$ but wouldn't go slow enough with enough strength to cut steel.

I have a nice Craftsman bandsaw 14" it is just like the ones made by Rikon with the blade guide ball bearing rollers. Comes with fence and light. Fence is not shown in pictures.

var itemNumber = window.ebayItemID ?

STARRETT 1/2" BAND SAW MATERIAL Today we have a variety of TPI (teeth per inch) band saw blade material. Below is a list of TPI, set type, and estimated remaining footage of material. Normally a 100ft roll averages $160.

STARRETT 3/8" BAND SAW MATERIAL Today we have a variety of TPI (teeth per inch) band saw blade material. Below is a list of TPI, set type, and estimated remaining footage of material. Normally a 100ft roll averages $150.

STARRETT 1/4" BAND SAW MATERIAL Today we have a variety of TPI (teeth per inch) band saw blade material. Below is a list of TPI, set type, and estimated remaining footage of material. Normally a 100ft roll averages $150.