3 4 to 5 8 bushing for sale, brand-new and used.

You are bidding 6 of used American Drill Bushing's swivel hoist ring. The details of the product is as follows. 1.

UP TO 4 NEW THOMSON 5/8" PRECISION BALL OPEN BUSHING BEARINGS SUPER 10 OPN This is a Fixed Auction for up to 4 New in the Box, Thomson 5/8" Precision Open Ball Bushing Bearings, No.Super 10 OPN- Dynamic Load Capacity Lbs: 320 (Pounds). PLEASE NOTE -- Each Bid is for ONE Bearing Gap Angle 15 degrees Gap Width (Min.) .37 inch Groove Length .056 inch Inside Diameter .625 inch Measurement System Inch Len

UP TO 4 NEW THOMSON 5/8" PRECISION BALL BUSHING BEARINGS SUPER 10 This is a Fixed Auction for up to 4 New in the Box, Thomson 5/8" Precision Ball Bushing Bearings, No.Super 10 - Dynamic Load Capacity Lbs: 450 (Pounds). PLEASE NOTE -- Each Bid is for ONE Bearing Outside Dia. 1.1250" Between Grooves (mm) 1.105"

We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! GF Condition: GREAT Specifications: Keyway Size: 3/4" Bushing Body Diameter: 3-1/16" Head Diameter: 4-3/8" Comes as shown in pictures.

Boeing UT7020-3 / Lockheed DS616-6 Slotted Locator Bushing for 3/8" Pin FEATURES: Use with L Pins, T Pins, Shoulder Pins, or Ball Lock Clamps to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. SIZES: Available for 3/16 to 1" diameter pins (6 to 25mm in metric) — see Dimensions page for part numbers.

**This is a Brand New in the Box** Kreg DB210-MBB HD Drill Bit with Guide for Pocket Machine Features Micro-Pocket Accessories are perfect for when your customers want the smallest pocket hole possible. To get started drilling 25% smaller pocket holes with the Foreman, your customers will need a Micro Bit and Guide Bushing (Item# DB210-MBB). Product Information: Micro Pocket™ Kreg® Joints have a 25% smaller hole than standard 3/8" pocket joint

YOU ARE LOOKING AT A NEW PAPER PULLEY THAT WILL START AT A VERY LOW PRICE.( THIS PULLEY IF YOU HAD ONE BUILT WOULD COST OVER $155.64 ) PULLEY WAS MADE BY paper pulleys inc. 5 1/2"OD X 7" FACE WERE BELT RUNS X 1 5/8" BORE.SET SCREW AND KEYWAY. IF YOU HAVE ANY ?

Clarostat/ Honeywell 600-128-c24 OPTICAL ENCODER ROTARY CONTROL PCB mount Obtained from govt surplus, looks unused, but I will call it used... 100% guaranteed. Here is some stuff I found on the interweb in blue...

Up for grabs we have a brand new old stock Martin QD bushing. READY TO SHIP! The bushing in the picture is what you are buying, no stock photos!